Polymer electrolyte membranes based on polystyrenes with phosphonic acid via long alkyl side chains

A series of polystyrenes with phosphonic acid ( 5 ) via long alkyl side chains (4, 6, and 8 methylene units) were prepared by the radical polymerization of the corresponding diethyl ω‐(4‐vinylphenoxy)alkylphosphonates, followed by the hydrolysis with trimethylsilyl bromide. The resulting phosphonated polystyrene membranes had a high oxidative stability against Fenton's reagent at room temperature. The membranes prepared from 5 exhibited a very low water uptake, similar to that of Nafion 117 over the wide range of 30 to 80% relative humidity (RH). The proton conductivities of these membranes are lower than that of Nafion 117 in the range of 30 to 90% RH, but comparable or higher than those of the reported phosphonated polymers with higher IEC values, such as the phosphonated poly(N‐phenylacrylamide) (PDPAA, IEC: 6.72 mequiv/g) and fluorinated polymers with pendant phosphonic acids (M47, IEC: 8.5 mequiv/g), at low RH conditions despite the much lower IEC values (3.0–3.8 mequiv/g) of these membranes. These results suggest that the flexible pendant side chains of 5 would contribute to the formation of hydrogen‐bonding networks by considering the very low water uptake of these polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The nature of marbled Terra Sigillata slips: a combined μXRF and μXRD investigation

In addition to the red terra sigillata production, the largest Gallic workshop (La Graufesenque) made a special type of terra sigillata, called “marbled” by the archaeologists. Produced exclusively at this site, this pottery is characterized by a surface finish made of a mixture of yellow and red slips. Because the two slips are intimately mixed, it is difficult to obtain the precise composition of one of the two constituents without contamination from the other. In order to obtain very precise correlation at the appropriate scale between the color aspect and the elemental and mineralogical phase distributions in the slip, combined electron microprobe, X-ray micro spectroscopies and micro diffraction on cross-sectional samples were performed. The aim of this study is to discover how potters were able to produce this unique type of terra sigillata and especially this particular slip of an intense yellow color. Results show that the yellow component of marbled sigillata was made from a titanium-rich clay preparation. The color is due to the formation of a pseudobrookite (TiFe₂O₅) phase in the yellow part of the slip, the main characteristics of that structure being considered nowadays as essential for the fabrication of stable yellow ceramic pigments. Its physical properties such as high refractive indices and a melting point higher than that of most silicates widely used as ceramic colorants are indeed determinant for this kind of application. Finally, the red parts have a similar composition (elementary and mineralogical) to the one of standard red slip.     

Evaluating a time-delay of hydrogen production quantitatively in photosynthetic bacteria for stabilizing intermittency

Renewable energy is regarded as a clean energy source but has some problems, one of which is intermittency. To reduce this, the time-delay of hydrogen production by photosynthetic bacteria can be effective. In this study, we qualitatively evaluated the time-delay of hydrogen production by photosynthetic bacteria under various irradiation conditions, and we also quantitatively evaluated it by fitting the experimental data and the hydrogen production model with a genetic algorithm. As a result of model fitting, we found that the relationship between the lengths of the optimized time-delay of hydrogen production by photosynthetic bacteria and the amount of light irradiation is linear. And we also found that the time-delay of hydrogen production by photosynthetic bacteria had an upper limit under low light intensity. We have suggested the existence of an energy store mechanism in photosynthetic bacteria.     

A practical synthesis of L-ribose

L-Ribose was synthesized by a simple four-step method with overall yield of 76.3% from a protected L-arabinose derivative, which is a compatible intermediate for the synthesis of L-deoxyribose. The key step of this strategy is the Swern oxidation and subsequent stereoselective reduction accompanied by inversion of the 2-hydroxy group of protected L-arabinose.     

Scandium(III) trifluoromethanesulfonate catalyzed aromatic nitration with inorganic nitrates and acetic anhydride

The rare earth metal(III) trifluoromethanesulfonate (rare earth metal(III) triflate, RE(OTf)3) was found to be an efficient catalyst for aromatic nitration with carboxylic anhydride-inorganic nitrate as the nitrating agent. In the presence of a catalytic amount of RE(OTf)3, the nitration of substituted benzenes proceeded to afford the corresponding nitrobenzenes. Especially, scandium(III) trifluoromethanesulfonate (scandium(III) triflate, Sc(OTf)3) is the most active catalyst among our tested Lewis acids. It was also found that acetic anhydride-Al(NO3).9H2O is the most active nitrating agent in this system.     

Preparation and characterization of silica-pillared derivatives from kanemite

The silica-pillared derivatives from kanemite (NaHSi(2)O(5).3H(2)O) were prepared by intercalation of dialkyldimethylammonium (DADMA) ion and pillaring with tetraethylorthosilicate. The formation of silica pillars between the silicate sheets was demonstrated by X-ray diffraction, (29)Si CP/MAS NMR, and TEM observation. The basal spacing depended on the chain length of DADMA. Nitrogen adsorption study showed that the specific surface area was enlarged over 1000 m(2) g(-1) by the pillaring and that the pore size was in the micropore region. Water and benzene adsorption isotherms revealed that the surface properties of the pillared derivatives show hydrophobic character.     

Structural and Physical Properties of New Conducting Cation Radical Salts with Te-Based Counteranions, Tetraiodotellurate(II) and Hexaiododitellurate(II)

This article reports preparation, structure, and conducting property of several cation radical salts of organic donors tetramethyltetrathiafulvalene (TMTTF), ethylenedithiotetrathiafulvalene (EDT-TTF), bis(ethylenedithio)tetrathiafulvalene (ET), bis(ethylenedithio)tetraselenafulvalene (BETS) and hexamethylenetetraselenafulvalene (HMTSF) with two novel planar Te-based dianions, TeI₄²⁻ and Te₂I₆²⁻. (ET)₅Te₂I₆ 1 and (BETS)₅Te₂I₆ 2 are isostructural. In these Te₂I₆²⁻ salts, intermolecular short I···I contacts form a supramolecular corrugated anion sheet. Donor arrangement is similar to the θ-type. With lowering temperature, the resistivity of 1 shows a gradual increase followed by a sharp upturn at 110 K. 2 is metallic down to 120 K and shows a gradual increase of the resistivity followed by a clear transition to an insulating state around 60 K. Crystal structure of (ET)₄TeI₄ 3 is based on the “herring bone” arrangement of ET molecules similar to the α-type. 3 shows a semiconductive behavior around room temperature followed by a transition to an insulating state at 210 K. (EDT-TTF)₄TeI₄ 4, a semiconductor, exhibits a unique two-dimensional arrangement of dimerized EDT-TTF molecules.     

Illumination accelerates the decay of the O-intermediate of pharaonis phoborhodopsin (sensory rhodopsin II)

pharaonis phoborhodopsin (ppR, also called pharaonis sensory rhodopsin II [psRII]) is a member of the archaeal rhodopsin family and acts as a repellent phototaxis receptor of Natronobacterium pharaonis. Upon illumination, ppR is excited and undergoes a linear cyclic photoreaction, namely, a photocycle that constitutes photointermediates such as M- and O-intermediates (ppRM and ppRO, respectively). Under a constant background illumination (>600 nm) that irradiates ppRO, the decay rate of the flash-induced ppRO increased with an increase in the background light intensity, indicating the photoreactivity of ppRO. Azide did not influence the light-accelerated ppRO decay, but the time required for the cycle to be completed became shortened in an azide concentration-dependent manner because of acceleration of ppRM decay. Hence, the turnover rate of photocycling increased appreciably in the presence of both the background illumination and the azide. The observation reported previously (Schmies, G. et al. 2000, Biophys. J. 78:967-976) is discussed in connection with the present observations.     

BF3.OEt2-mediated cycloaddition of O-tert-butyldimethylsilyloximes having olefin moieties: intramolecular cycloaddition of N-borano-nitrones

Treatment of O-tert-butyldimethylsilyloximes having olefin moieties in the molecules with BF3.OEt2 results in efficient generation of N-borano-nitrones, which undergo intramolecular cycloaddition at room temperature to afford N-nonsubstituted cycloadducts after work-up.     

Nucleophilic addition reaction of 2-trimethylsilyloxyfuran to N-gulosyl-C-alkoxymethylnitrones: synthetic approach to polyoxin C

[reaction: see text] The stereoselectivity of nucleophilic addition of 2-trimethylsilyloxyfuran to N-gulosyl-C-alkoxymethylnitrones was investigated. It was found that the selectivity was highly dependent on the bulkiness of the C-substituent of the nitrone. The major adducts were elaborated into the key intermediate of polyoxin C.