Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

2,3,4,5,6‐Pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T_gs) of the copolymers were found positively deviated from the Gordon–Taylor equation. The positive deviation could be accounted for by dipole–dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T_g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one‐third of that for pure PMMA. The fluorinated styrenes‐MMA copolymers were thermally stable up to 420 °C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 °C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with nonfluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Fluorescence properties of novel 6-butyl-2,3-dicyano-7-methyl-6H-1,4-diazepine styryl dyes containing ethyleneglycol units

The fluorescence properties of novel 6-butyl-2,3-dicyano-7-methyl-6H-1,4-diazepine styryl dyes having mono-, di-, tri-, and tetra(ethyleneglycol) units were examined. The mono(ethylenglycol) derivative was solid at room temperature, whereas the di-, tri-, and tetra(ethylenglycol) derivatives were oily. The monoethyleneglycol derivative showed weak aggregation-induced emission enhancement with fluorescence maximum at 649 nm, which comes from J-aggregates. The fluorescence of oily di-, tri-, and tetra(ethyleneglycol) derivatives in neat form was very weak. No aggregation-induced emission enhancement was observed for the oily derivatives.     

Dependency of ligand free energy landscapes on charge parameters and solvent models

We performed replica-exchange molecular dynamics (REMD) simulations of six ligands to examine the dependency of their free energy landscapes on charge parameters and solvent models. Six different charge parameter sets for each ligand were first generated by RESP and AM1-BCC methods using three different conformations independently. RESP charges showed some conformational dependency. On the other hand, AM1-BCC charges did not show conformational dependency and well reproduced the overall trend of RESP charges. The free energy landscapes obtained from the REMD simulations of ligands in vacuum, Generalized-Born (GB), and TIP3P solutions were then analyzed. We found that even small charge differences can produce qualitatively different landscapes in vacuum condition, but the differences tend to be much smaller under GB and TIP3P conditions. The simulations in the GB model well reproduced the landscapes in the TIP3P model using only a fraction of the computational cost. The protein-bound ligand conformations were rarely the global minimum states, but similar conformations were found to exist in aqueous solution without proteins in regions close to the global minimum, local minimum or intermediate states.     

Synthesis and characterization of transparent silica-based aerogels using methyltrimethoxysilane precursor

Silica-based aerogels with high transparency and high bending strength were prepared using methyltrimethoxysilane and non-ionic surfactant under supercritical drying condition of CO₂. Non-ionic surfactant, ethylene oxide/propylene oxide block copolymer, was appropriate to form the three dimensional-connected thinner fibers of silica skeletons, which was extruded by soaking the wet gel in hot water at 50 °C, resulting in the formation of porous materials having small pores with narrow size distribution. The transparency of aerogels increased with decreasing the pore size, reaching to higher than 65 and 88% at 400 and 600 nm wavelength, respectively, for 10 mm thickness of sample. The formation of fiber skeletons were discussed using small angle X-ray scattering experiments.     

Preparation of alpha-elastin nanoparticles by gamma irradiation

Nanoparticles were prepared by utilizing the thermosensitive aggregation of alpha-elastin and gamma ray crosslinking. Three different heating process, “Slow heating”, “Fast heating”, and “Heat shock”, were applied for the aggregation of the alpha-elastin and examined to yield nanoparticles by gamma rays crosslinking. As a result, only “Slow heating” process yielded nanoparticles with diameters of about ca. 300 nm above cloud point (CP) and about ca. 100 nm below CP, and a narrow size distribution above 1.0 mg/ml concentration (exclude 1.0 mg/ml).     

Preparation and condensation reactions of a new light-fluorous Mukaiyama reagent: reliable purification with fluorous solid phase extraction for esters and amides

A modified light-fluorous Mukaiyama reagent bearing a C₈F₁₇ tag was prepared and examined in ester and amide forming condensation reactions. Following the reactions, the desired product was effectively separated from the fluorous pyridone by-product using a simple fluorous solid phase extraction.     

Direct enantiomeric separations of tris(2-phenylpyridine) iridium (III) complexes on polysaccharide derivative-based chiral stationary phases

A convenient method is presented for the first time for the direct separation of enantiomers of a tris(2-phenylpyridine) iridium (III) and an analog substituted with long alkoxy chains on polysaccharide derivative-based chiral stationary phases by HPLC. Tris(2-phenylpyridine) iridium (III) was separated on the immobilized amylose 3,5-dimethylphenylcarbamate (Chiralpak IA) using hexane/CHCl3/CH2Cl2 (75:20:5) as an eluent, and the analog could be separated on the coated cellulose 3,5-dimethyl-phenylcarbamate (Chiralcel OD) and cellulose 4-methylbenzoate (Chiralcel OJ) using hexane/2-propanol (96:4) as the eluent. CD spectra of the eluted HPLC fractions were also recorded, and the observed mirror image patterns confirm their enantioseparations.     

Immobilization of polysaccharide derivatives onto silica gel Facile synthesis of chiral packing materials by means of intermolecular polycondensation of triethoxysilyl groups

The 3,5-dimethylphenylcarbamates of cellulose and amylose bearing a small amount of 3-(triethoxysilyl)propyl residues were synthesized by a simple process and efficiently immobilized onto a silica gel support by intermolecular polycondensation of the triethoxysilyl groups. The obtained chiral packing materials (CPMs) were evaluated by high-performance liquid chromatography. The polysaccharide derivatives containing about 1-2% of the 3-(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition. The immobilized CPMs could be used with the eluents containing chloroform and tetrahydrofuran, which cannot be used with the conventional coated-type CPMs. By using these eluents, the chiral recognitions for many racemates could be improved.     

Colloidal crystals of core-shell type spheres with poly(styrene) core and poly(ethylene oxide) shell

Elastic modulus and crystal growth kinetics have been studied for colloidal crystals of core–shell type colloidal spheres (diameter = 160–200 nm) in aqueous suspension. Crystallization properties of three kinds of spheres, which have poly(styrene) core and poly(ethylene oxide) shell with different oxyethylene chain length (n = 50, 80 and 150), were examined by reflection spectroscopy. The suspensions were deionized exhaustively for more than 1 year using mixed bed of ion-exchange resins. The rigidities of the crystals range from 0.11 to 120 Pa and from 0.56 to 76 Pa for the spheres of n = 50 and 80, respectively, and increase sharply as the sphere volume fraction increase. The g factor, parameter for crystal stability, range from 0.029 to 0.13 and from 0.040 to 0.11 for the spheres of n = 50 and 80, respectively. These g values indicate the formation of stable crystals, and the values were decreased as the sphere volume fraction increased. Two components of crystal growth rate coefficients, fast and slow, were observed in the order from 10⁻³ to 10¹ s⁻¹. This is due to the secondary process in the colloidal crystallization mechanism, corresponding to reorientation from metastable crystals formed in the primary process and/or Ostwald-ripening process. There are no distinct differences in the structural, kinetic and elastic properties among the colloidal crystals of the different core–shell size spheres, nor difference between those of core–shell spheres and silica or poly(styrene) spheres. The results are very reasonably interpreted by the fact that colloidal crystals are formed in a closed container owing to long-range repulsive forces and the Brownian movement of colloidal spheres surrounded by extended electrical double layers, and their formation is not influenced by the rigidity and internal structure of the spheres.     

Carbonyl reduction with CaH2 and R3SiCl catalyzed by ZnCl2

Ketones and aldehydes were effectively reduced to the corresponding alcohols (or their silyl ethers) by the reaction with CaH₂ and R₃SiCl in the presence of a catalytic amount of ZnCl₂. In the absence of the carbonyl substrate, the reagent reduced R₃SiCl to the corresponding hydrosilane under mild reaction conditions.