Calorimetric study ofβ-cyclodextrin undecahydrate

Heat capacities of crystalline-cyclodextrin undecahydrate have been measured in the temperature range between 13 and 300K by use of a miniaturized adiabatic low-temperature calorimeter. A first-order phase transition occurred at 226K with a discontinuous entropy change of 45.0 ± 1.0J K ^–1 mol^–1. The highly disordered nature of the high temperature phase was considered in relation to the entropy contribution. A glass transition phenomenon observed around 150K was ascribed to the freezing of a configurational change of the protons engaged in the four-membered hydrogen-bonded ring which appeared only in the low temperature phase.     

Selective spectrophotometric determination of palladium(II) with 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO(2).PAPS) and tartaric acid with 5-NO(2).PAPS-niobium(V) complex

Spectrophotometric determinations of palladium(II) and tartaric acid were respectively investigated by using the color reactions between 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO₂.PAPS) and palladium(II) in strong acidic media, and between 5-NO₂.PAPS, niobium(V) tartaric acid in weak acidic media. The calibration graphs were linear in the range of 0–25 μg/10 ml palladium(II), with an apparent molecular coefficient () of 6.2×10⁴ l mol⁻¹ cm⁻¹ at 612 nm, and 0–23 μg/10 ml tartaric acid with =1.08×10⁶ l mol⁻¹ cm⁻¹ at 612 nm, respectively. The proposed methods were selective and sensitive in comparison with other chelating pyridylazo dyes–palladium(II) or metavanadic acid–tartaric acid method, and the effect of foreign ions such as copper(II) was negligible for the assay of palladium(II) with 5-NO₂.PAPS.     

Dielectric study on pure and KOH-doped tetrahydrofuran clathrate hydrates

Complex dielectric permittivities of pure and KOH-doped (x = 1.8 x 10^–4) tetrahydrofuran clathrate hydrates were measured in the temperature range 20–260 K and in the frequency range 20 Hz-1 MHz. The relaxation time of the water reorientational motion was found to decrease drastically as a result of the doping; e.g., the relaxation time of the doped sample was 10^–9 times shorter than that of the pure sample at 70 K. The activation enthalpy of the motion was reduced to 7.4 kJ mol^–1. On cooling the crystal, the value of decreased suddenly at the 62 K phase transition to the ₂ value of the pure sample and at the same time disappeared. No dispersion effect due to the guest reorientation was observed below the transition. These data indicate that both the host and guest molecules become ordered or, at least, change their mobility drastically. In the pure sample, a relaxation phenomenon of ₀₂ was found around the glass transition region. The relaxation times agreed well with those derived from the enthalpy of relaxation in a calorimetric study.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

Novel indoline dye tetrabutylammonium carboxylates attached with a methyl group on the cyclopentane ring for dye-sensitized solar cells

(2R,3aR,8bR)- and (2S,3aS,8bS)-2-Methyl indoline dye tetrabutylammonium carboxylates exhibited the highest conversion efficiency among four regio and stereo isomers. These indoline dyes also showed higher conversion efficiency than DN350.     

Lithium‐Ion Endohedral Fullerene (Li+@C60) Dopants in Stable Perovskite Solar Cells Induce Instant Doping and Anti‐Oxidation

Herein, we report use of [Li⁺@C₆₀]TFSI^? as a dopant for spiro‐MeOTAD in lead halide perovskite solar cells. This approach gave an air stability nearly 10‐fold that of conventional devices using Li⁺TFSI^?. Such high stability is attributed to the hydrophobic nature of [Li⁺@C₆₀]TFSI^? repelling moisture and absorbing intruding oxygen, thereby protecting the perovskite device from degradation. Furthermore, [Li⁺@C₆₀]TFSI^? could oxidize spiro‐MeOTAD without the need for oxygen. The encapsulated devices exhibited outstanding air stability for more than 1000 h while illuminated under ambient conditions.     

Morphology and mechanical properties of poly(vinyl alcohol) and starch blends prepared by gelation/crystallization from solutions

 In an attempt to produce biodegradation materials, poly(vinyl alcohol) (PVA)–starch (ST) blends were prepared by gelation/crystallization from semidilute solutions in dimethyl sulfoxide (Me₂SO) and water mixtures and elongated up to 8 times. The content of mixed solvent represented as Me₂SO/H₂O (volume percent) was set to be 60/40 assuring the greatest drawability of PVA homopolymer films. The PVA/ST compositions chosen were 1/1, 1/3, and 1/5. The elongation up to 8 times could be done for the 1/1 blend but any elongation was impossible for blends whose ST content was beyond 50%. When the blends were immersed in water at 20 or 83 °C, the solubility became considerable for an undrawn blend with 1/5 composition and a drawn 1/1 blend with λ=8. To avoid this phenomenon, cross-linking of PVA chains was carried out by formalization under formaldehyde vapor. Significant improvement could be established by the cross-linking of PVA chains. For the 1/1 blend, the amount of ST dissolved in water at 23 °C was less than 3% for the undrawn state and 25% for the drawn film. The decrease in the ST content was enough for use as biodegradation materials. Namely, the water content relating to the biodegradation in soil is obviously different from such a serious experimental condition that a piece of blend film was immersed in a water bath. At temperatures above 0 °C, the storage modulus of the formalization blends became slightly higher than those of the nonformalization blends. The Young's modulus of the drawn films with a draw ratio of 8 times was 2 GPa at 20 °C. Received: 23 June 2000 Accepted: 30 October 2000     

Sodium and Calcium Laurylamidomethylsulfate: Aqueous Micellar Phases, Their Properties, and a Precipitate of Vesicles

A new anionic surfactant (M-LAMS) that is capable of forming intermolecular hydrogen bonds was investigated. Inverse solubilities of Na and Ca salts were found. Critical micelle concentration and aggregation behavior were determined by surface tension, light scattering, electric birefringence, and SANS measurements. It is found that the Na salt forms globular micelles while the Ca salt forms rodlike micelles. The phase behavior of the micellar solutions with increasing cosurfactant concentration was also studied. It is observed that 100 mM Na-LAMS solutions in the presence of 100 mM CaCl(2) undergo several phase transformations with increasing n-hexanol concentration. We found not only the expected micellar L(1) phase and a lamellar phase at concentrations quite low for this kind of system, but also a novel phase: At a cosurfactant/surfactant ratio x(C) of 1.2 a white precipitate is formed at the bottom of the sample. With increasing ratio x(C) the precipitate dissolves into a liquid crystalline L(alpha) phase that at x(C)=3.2 is transformed into an L(3) or sponge phase. Investigation by FF-TEM, light microscopy, and SANS shows that the precipitate consists of agglomerated polydisperse multilamellar vesicles. The vesicles consist of densely packed bilayers that contain little water. The bilayer thickness is about 20 ? and independent of its composition whereas the interlamellar distance is strikingly linked to concentrations of cosurfactant (surfactant/cosurfactant ratio) and electrolyte. With increasing cosurfactant content, the bilayers become less rigid and resulting thermal undulations force the membranes apart and weaken their interactions until a common L(alpha) phase is formed. This transition is an example of a bonding-nonbonding transition of membranes. Copyright 2001 Academic Press.     

Six-membered palladacycles formed by cyclopalladation of 2-anilinopyridine derivatives

Summary Reactions of palladium(II) chloride with 2-substituted pyridines (HL), 2-(p-R-C₆H₄-Y)-C₅H₄N (R = H, CH₃, Cl; Y= NH, NCH₃, O, S, CH₂) form 12 complexestrans-[PdCl₂(HL)₂], HL being coordinated through a pyridine-N atom. When the ratio PdCl₂/HL = 1/1, the pyridine derivatives with Y = NH are cyclopalladated to form another type of complexes [PdClL]₂. In [PdClL]₂ the deprotonated ligand L is chelated through pyridine-N and phenylortho-C atoms forming an unusual six-membered palladacycle. Like other cyclopalladated complexes containing a five-membered palladacycle, [PdClL]₂ reacts with pyridine (py) to form adducts [PdClL(py)]. [Pd(acac)L] and [Pd(dtc)L] were also prepared and characterized (acac=acetylacetonate and dtc =N,Ndimethyldithiocarbamate ion).