Dielectric study on pure and KOH-doped tetrahydrofuran clathrate hydrates

Complex dielectric permittivities of pure and KOH-doped (x = 1.8 x 10^–4) tetrahydrofuran clathrate hydrates were measured in the temperature range 20–260 K and in the frequency range 20 Hz-1 MHz. The relaxation time of the water reorientational motion was found to decrease drastically as a result of the doping; e.g., the relaxation time of the doped sample was 10^–9 times shorter than that of the pure sample at 70 K. The activation enthalpy of the motion was reduced to 7.4 kJ mol^–1. On cooling the crystal, the value of decreased suddenly at the 62 K phase transition to the ₂ value of the pure sample and at the same time disappeared. No dispersion effect due to the guest reorientation was observed below the transition. These data indicate that both the host and guest molecules become ordered or, at least, change their mobility drastically. In the pure sample, a relaxation phenomenon of ₀₂ was found around the glass transition region. The relaxation times agreed well with those derived from the enthalpy of relaxation in a calorimetric study.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

ZINC TETRAPHENYLPORPHYRIN-SENSITIZED PHOTOREDUCTION OF ANTHRAQUINONESULFONATE IN AQUEOUS MICELLAR SOLUTIONS*

Abstract— Zn-tetraphenylporphyrin (ZnTPP), solubilized in non-ionic surfactant micelles, was found to sensitize photoreductions of some sodium anthraquinonesulfonatesz in the presence of ascorbic acid under anaerobic conditions. The reaction rate was increased by the addition of an anionic surfactant, while retardation was observed with a cationic surfactant. The pH-reaction rate profiles showed maxima located in the order corresponding to pK_a-values for the semiquinone of each anthraquinone-sulfonate. A reaction scheme involving the formation of ZnTPP⁺ at the primary step, followed by back-reduction with ascorbic acid, is proposed. The reaction scheme is in good agreement with the results of flash photolysis. The surfactant micelles are suggested to aid the charge-separation between the ionic species just after the redox reaction involving the photoexcited ZnTPP and anthraquinonesulfonates.     

Improved spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol in the presence of benzyldimethylstearyltrimethylammonium chloride

An improved spectrophotometric determination of uranium(VI) is proposed using 4-(2-pyridylazo)resorcinol(PAR) in the presence of benzyldimethylstearyltrimethylammonium chloride(BSTAC) as a cationic surfactant. The calibration graph is linear in the range of 0.3-60 microg/10 ml uranium(VI), measuring the absorbance at 550 nm. The reproducibility for 19.0 microg/10 ml uranium(VI) is 0.57%. The third-derivative method using the third-derivative distance (d(3)A/dlambda(3)) among lambda(1) 530 nm, lambda(3) 594 nm and lambda(2) 565 nm was also investigated.     

General analysis of the measurements of the lateral crystal lattice moduli of semicrystalline polymers by x-ray diffraction and the application to nylon 6

A mathematical representation based on a linear elastic theory is proposed by which one may investigate the dependences of molecular orientation and crystallinity on the crystal lattice moduli and linear thermal expansion coefficients in the direction perpendicular to the chain axis as commonly measured by x-ray diffraction. In the theoretical calculation, a previously introduced model was employed in which oriented crystalline phase is surrounded by oriented amorphous phase and the strains of the two phases at the boundary are identical. The mathematical analysis indicated that the lateral crystal lattice moduli and linear thermal coefficients as measured by x-ray diffraction may be different from the intrinsic crystal moduli and linear thermal coefficients of a crystal unit cell, depending on the structure of the polymer solid. The numerical calculation was applied to nylon 6. As a result, it may be confirmed that the lateral crystal lattice moduli measured by x-ray diffraction are sensitive to the morphology of the bulk speciments and close to the intrinsic crystal moduli if the morphology of the test specimen can be represented by a parallel model with respect to the original stretching longitudinal direction.     

Chiral separation of trimetoquinol hydrochloride and related compounds by micellar electrokinetic chromatography using sodium taurodeoxycholate solutions and application to optical purity determination

The chiral separation of trimetoquinol hydrochloride, which is a bronchodilator (Inolin), and three related compounds by micellar electrokinetic chromatography was investigated using a bile salt as a chiral surfactant. Enantiomers of these compounds, except laudanosoline, were successfully separated within 12 min using a separation tube of effective length 500 mm × 0.05 rum i.d. and a 0.05 M sodium taurodeoxycholate solution of pH 7.0. The observed theoretical plate numbers of the peaks were ca. 150000. Chiral recognition was affected by the structure of bile salts, the pH of the buffer solutions used and the structure of the solutes. Of four kinds of bile salts, successful chiral separation was achieved only using sodium taurodeoxycholate solution under neutral conditions. The method was applied to the optical purity determination of trimetoquinol hydrochloride. The effects of surfactant concentrations and some additives to the micellar solution are briefly described.     

Temperature-dependence of mechanical and morphological properties of ultra-high molecular weight polyethylene cross-linked by electron beam irradiation

Cross-linking of ultra-high molecular weight polyethylene was performed with electron-beam irradiation in the range of radiation dose from 12 to 96 Mrad under nitrogen. Dry gel films and melt films were used as specimens. Two kinds of cross-linked specimens could be kept at 200°C for a prolonged time in an undeformed state and this tendency was independent of radiation dose. The elongation of the gel films hampered the heat-resistant effect and the drawn specimens were broken at temperatures lower than 175 °C. The elongation of the melt films could not be realized, because of a marked fixation of chains in the fiber network, even at a dose of 12 Mrad.     

Reductive activation of dioxygen by a myoglobin reconstituted with a flavohemin

We successfully converted myoglobin, an oxygen-storage hemoprotein, into an oxygen-activating hemoprotein like cytochrome P450s by replacing the native hemin with the artificially created flavohemin. The reconstituted myoglobin, rMb(1), was chacterized by ESI-TOF-mass, UV-vis, and fluorescence spectra. The 1H NMR spectrum of cyanomet rMb(1) indicates that two hemin conformers are present in a ratio of 1:1. Upon the addition of NADH to the buffer solution of rMb(1) in the presence of SOD and catalase, the oxymyoglobin was rapidly formed. As compared with the formation of the oxygenated native myoglobin in the presence of 10-N-(acetylaminoethyl)isoalloxazine, the rate constant of the oxyheme formation in rMb(1) is 6 times larger. This is because the flavin covalently linked to the terminal heme propionate functions as an effective mediator of an electron transfer from NADH to the hemin in rMb(1). Furthermore, rMb(1) shows the deformylation activity, when 2-phenylpropionaldehyde (2-PPA) was employed as a substrate. This result indicates that the oxyheme is reductively activated to Fe(III)-peroxoanion (Fe(III)-O22-). The result in this report is the first example of the activation of dioxygen by myoglobin. This study shows the utility of the replacement of the native hemin with a chemically modified one for the functionalization of myoglobin.     

Selective and sensitive fluorometric determinations of cobalt(II) and hydrogen peroxide with fluorescein-hydrazide

Fluorophotometric determinations of cobalt(II) and hydrogen peroxide were investigated by using the fluorescence reaction between fluorescein-hydrazide (fl-NHNH(2)), and/or hydrogen peroxide, cobalt(II), respectively. The calibration graphs were liner in the range of 0-6.0 ng cobalt(II) and 0-1000 ng hydrogen peroxide per 10 ml at an emission wavelength (E(m)) of 530 nm with an exicitation wavelength (E(x)) of 508 nm, respectively. These proposed methods were selective and simple, and the effect of foreign ions was negligible in comparison with conventional reported methods such as nitroso R,4-(2-pyridylazo)resorcinol(PAR), alizarin, pyridine-2-aldehyde-2-pyridinehydrazone, stilbazo-cobalt(II), etc.     

Ligand binding properties of myoglobin reconstituted with iron porphycene: unusual O2 binding selectivity against CO binding

Sperm whale myoglobin, an oxygen storage hemoprotein, was successfully reconstituted with the iron porphycene having two propionates, 2,7-diethyl-3,6,12,17-tetramethyl-13,16-bis(carboxyethyl)porphycenatoiron. The physicochemical properties and ligand bindings of the reconstituted myoglobin were investigated. The ferric reconstituted myoglobin shows the remarkable stability against acid denaturation and only a low-spin characteristic in its EPR spectrum. The Fe(III)/Fe(II) redox potential (-190 mV vs NHE) determined by the spectroelectrochemical measurements was much lower than that of the wild-type. These results can be attributed to the strong coordination of His93 to the porphycene iron, which is induced by the nature of the porphycene ring symmetry. The O2 affinity of the ferrous reconstituted myoglobin is 2600-fold higher than that of the wild-type, mainly due to the decrease in the O2 dissociation rate, whereas the CO affinity is not so significantly enhanced. As a result, the O2 affinity of the reconstituted myoglobin exceeds its CO affinity (M' = K(CO)/K(O2) < 1). The ligand binding studies on H64A mutants support the fact that the slow O2 dissociation of the reconstituted myoglobin is primarily caused by the stabilization of the Fe-O2 sigma-bonding. The IR spectra for the carbon monoxide (CO) complex of the reconstituted myoglobin suggest several structural and/or electrostatic conformations of the Fe-C-O bond, but this is not directly correlated with the CO dissociation rate. The high O2 affinity and the unique characteristics of the myoglobin with the iron porphycene indicate that reconstitution with a synthesized heme is a useful method not only to understand the physiological function of myoglobin but also to create a tailor-made function on the protein.