4,7‐Diiodo‐2,1,3‐benzothiadiazole and 7,7′‐diiodo‐4,4′‐bi(2,1,3‐benzothiadiazole)

In the crystal structures of the title compounds, C₆H₂I₂N₂S, (I), and C₁₂H₄I₂N₄S₂, (II), respectively, a large number of short inter‐heteroatom contacts, such as S?N, I?I and N?I, are observed. In (II), which is non‐centrosymmetric, two halves of the mol­ecule are related by a crystallographic twofold axis.     

Reversed-phase high-performance thin-layer chromatography of hematoporphyrin and its nickel,copper and zinc complexes

Summary The thin-layer chromatographic mobility of hematoporphyrin IX (Hp) and its metal complexes on octyl (C₈)- or octadecyl (C₁₈)-bonded silica gel plate is described. The mobility order for those compounds is regular on both kinds of plate with various compositions of methanol-phosphate buffer mixtures as the developing solvents; thus, Cu-complex < Ni-complex < Hp (free acid) < Zn-complex. The combination of a C₁₈-plate with an 85∶15 (vol/vol) mixture of methanol and phosphate buffer (pH 3) is recommended for the successful separation of these four compounds.     

Unexpected formation of benzaldehydes by the reactions of dithioacetals derived from cinnamaldehydes with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents

1,3-Dithianes 1 , 1,3-dithiolanes 2 , and diphenyl dithioacetals 3 derived from cinnamaldehydes reacted with 2,3-dichloro-5,6-dicyano-p-benzoquinone in aqueous solvents to give benzaldehydes 4 . Hydride transfer from 1–3 to 2,3-dichloro-5,6-dicyano-p-benzoquinone followed by hydrolysis and oxidative carbon-carbon bond cleavage would produce benzaldehydes 4 .     

Numerical analysis of the behavior of hydrogen added into a free-burning arc

The objective of the present work is to investigate the behavior of hydrogen in an atmospheric-pressure free-burning argon are when a small amount of hydrogen is added into the arc. A two-dimensional model calculation is carried out under the assumption that the ionization reaction of argon is in equilibrium and the reactions among hydrogen molecules, atoms, ions, and electrons are not necessarily in equilibrium. This calculation gives the following conclusion. The hydrogen mass fraction of 0.001 is too small to affect the flow and temperature fields markedly, and the concentration ratios among the hydrogen species are in equilibrium in the greater part of the arc region except for same parts with a steep temperature gradient. The hydrogen mass Junction, however, is not uniform in the me and, especially in the high-temperature region near the cathodes, over three dynes mass fraction of the hydrogen accumulates and flows downstream to cause a high flux of hydrogen atom toward the anode. This phenomena can be explained by the large difference between the diffusivity of hydrogen atom and that of hydrogen ion in argon ion.     

Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.     

Synthesis and structure of 5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines

Hypervalent organobismuth compounds, 6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines, with 13 different substituents on the bismuth atom including halogens, alkyl, alkenyl, alkynyl, aryl, or phenylthio groups have been synthesized. A key compound, 12-chloro-6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocine, which is a precursor for other azabismocines, has been synthesized by two different procedures; one is based on Akiba’s method using 2-bromobenzylbromide as one of the starting materials and the other is a newly developed one using a cheaper starting material, 2-chlorobenzyl chloride. The structures of 12 new bismuth compounds were determined by X-ray diffraction. The eight-membered tetrahydroazabismocine ring has proved to be highly flexible and the hypervalent Bi-N bond distances vary ranging from 2.568(3) to 2.896(5) Å, depending on the electronic nature of the substituents on the bismuth atom. The Bi-N bond distances have good linear relationship against Hammett’s σ_m constants.     

Structure-activity relationship (SAR) studies on oxazolidinone antibacterial agents. 1. Conversion of 5-substituent on oxazolidinone

A structure-activity relationship (SAR) study on 5-substituted oxazolidinones as an antibacterial agent is described. The oxazolidinones, of which 5-acetylaminomethyl moiety was converted into other functions, were prepared and evaluated for antibacterial activity. Elongation of the methylene chain (8) and conversion of the acetamido moiety into guanidino moiety (12) decreased the antibacterial activity. The replacement of carbonyl oxygen (=O) by thiocarbonyl sulfur (=S) enhanced in vitro antibacterial activity. Especially, compound 16, which had the 5-thiourea group, showed 4-8 stronger in vitro activity than linezolid. Our SAR study revealed that the antibacterial activity was greatly affected by the conversion of 5-substituent.     

Photopolymerization of cyclohexene oxide by use of o-nitrobenzyl triphenylsilyl ether/aluminum compound catalyst. Dependence of catalyst activity on the structure of the silyl ether

o-Nitrobenzyl triphenylsilyl ehther/aluminum compound has been previously shown by the authors to act as catalyst in the photopolymerization of epoxides. The dependence of the structure of the silyl ether on the catalyst activity was examined. There were two steps in the photopolymerization. The first step (“Step 1”) is photodecomposition of the silyl ether to silanol. The second step (“Step 2”) is the initiation of polymerization by silanol and the aluminum compound. The introduction of an electron withdrawing group, Cl, CF₃, on the benzene ring bonded to Si made the quantum yield of Step 1 low, however, the rate of Step 2 was increased. The low quantum yield of Step 1 was explained in terms of the rate of electron transfer that is controlled by the relative electron density between the CH₂ and NO₂ in the o-nitrobenzyl group. The acceleration of Step 2 was explained in terms of an increase in silanol acidity that was promoted by the introduction of an electron withdrawing group. The overall rate of the photopolymerizatiol depends to a greater degree on the rate of Step 2 than on that of Step 1.     

Group separation of trivalent actinides and lanthanides by tertiary pyridine-type anion-exchange resin embedded in silica beads

The separation of trivalent actinides and lanthanides was studied by using newly developed tertiary pyridine-type anion-exchange resin embedded in silica beads. Chromatographic elution experiments were carried out by using a packed column of the new resin and methanol-hydrochloric acid solution as an effluent. We confirmed that the actinides were eluted well from the elution bands of lanthanides. Actinides and lanthanides were eluted according to the reverse order of their atomic number.     

Slurry sampling techniques for the determination of lead in Bangladeshi fish samples by electrothermal atomic absorption spectrometry with a metal tube atomizer

Ultrasonic slurry sampling electrothermal atomic absorption spectrometry with a metal tube atomizer has been applied to the determination of lead in Bangladeshi fish samples. The slurry sampling conditions, such as slurry stabilizing agent, slurry concentration, pyrolysis temperature for the slurried fish samples, particle size and ultrasonic agitation time, were optimized for electrothermal atomic absorption spectrometry with the Mo tube atomizer. Thiourea was used as the chemical modifier for the interference of matrix elements. The detection limit was 53 fg (3S/N). The determined amount of lead in Bangladeshi fish samples was consistent with those measured in the dissolved acid-digested samples. The advantages of the proposed methods are easy calibration, simplicity, low cost and rapid analysis.