Surface-coil-type resonators for in vivo temporal ESR measurements in different organs of nitroxide-treated rats

Three kinds of surface-coil-type resonators (SCRs) operating at 720 MHz were fabricated for in vivo temporal electron spin resonance (ESR) measurements. The inner diameter of the singleturn coil of the SCRs was 3, 4, or 10 mm. ResonatorQ increases and the detection limit decreases with coil diameter. The distance across which the microwave magnetic field can penetrate in the direction facing to the coil was about the same (about 2 mm) for all SCRs. In vivo kinetic studies of intravenously injected 4-hydroxy-2,2,6,6-tetramethylpiperidin-l-oxyl (TEMPOL) were performed at the liver, kidney, stomach, rectum, vein, and skin of rats with SCRs suited to the target areas. The halflife of TEMPOL was estimated from the exponential decay of the ESR signal intensity (the peak-to-peak height). Different sites in the rat showed apparent differences in the half-life of TEMPOL. This suggests that the apparent differences in the reducing ability of TEMPOL are related to the organ or tissue where measurement is taken because no excretion of TEMPOL was observed.     

Fluorescent Cyclodextrin/Peptide Hybrids with a Novel Guest‐Responsive Chemosensor in the Peptide Side Chain

Peptides bearing β‐cyclodextrin and 4‐(N,N‐dimethylamino)benzoyl (DMAB) units in the peptide side chains were prepared as chemosensors for molecule detection. The DMAB unit was expected to be included into the cyclodextrin cavity intramolecularly. However, these peptides exhibited no twisted intramolecular charge transfer fluorescence and the normal fluorescence intensity decreased upon the addition of 1‐adamantanol as an exogenous guest, indicating that the DMAB units are shallowly included in the cyclodextrin cavities.     

Cluster size dependence of SiO2 thin film formation by O2 gas cluster ion beams

Cluster size effects of SiO₂ thin film formation with size-selected O₂ gas cluster ion beams (GCIBs) irradiation on Si surface were studied. The cluster size varied between 500 and 20,000 molecules/cluster. With acceleration voltage of 5 kV, the SiO₂ thickness was close to the native oxide thickness by irradiation of (O₂)_20,000 (0.25 eV/molecule), or (O₂)_10,000 (0.5 eV/molecule). However, it increased suddenly above 1 eV/molecule (5000 molecules/cluster), and increased monotonically up to 10 eV/molecule (500 molecules/cluster). The SiO₂ thickness with 1 and 10 eV/molecule O₂-GCIB were 2.1 and 5.0 nm, respectively. When the acceleration voltage was 30 kV, the SiO₂ thickness has a peak around 10 eV/molecule (3000 molecules/cluster), and it decreased gradually with increasing the energy/molecule. At high energy/molecule, physical sputtering effect became more dominant process than oxide formation. These results suggest that SiO₂ thin film formation can be controlled by energy per molecule.     

ASACUSA MUSASHI: New progress with intense ultra slow antiproton beam

Our group “ASACUSA MUSASHI” has established an efficient way for accumulating antiprotons and extracting them as intense ultra-slow mono-energetic beams at the CERN-AD facility. This novel beam opens new frontiers for investigating a variety of physics. For realizing H? spectroscopy and the test for charge-parity-time symmetry, we have also developed the cusp trap, a combination of an anti-Helmholz superconducting coil and a multi-ring electrode trap, for trapping both antiprotons and positrons and then synthesizing antihydrogens. Recently, the cusp trap was practically used to accumulate antiprotons. The last piece for synthesizing antihydrogens in the cusp trap is the positron accumulator. We have developed a compact system to effectively accumulate positrons based on N₂ gas-buffer scheme with a specially designed high precision cylindrical multi-ring electrode trap. The recent progress of the developing work is an important milestone for upcoming antihydrogen science of ASACUSA MUSASHI.     

High performance bioanode based on direct electron transfer of fructose dehydrogenase at gold nanoparticle-modified electrodes

The direct electron transfer reaction of fructose dehydrogenase (FDH) from Gluconobacter sp. on alkanethiol-modified gold nanoparticles (AuNPs) was examined. AuNP-modified electrodes were simply fabricated by depositing citrate-reduced gold nanoparticles onto a gold electrode and carbon fiber paper and then covering the surface with a self-assembled monolayer of alkanethiols. The immobilization of AuNPs provided a large effective surface area for the adsorption of FDH. Catalytic oxidation currents based on the direct electron transfer reaction of FDH were observed from a potential about ?100 mV (vs. Ag/AgCl, 3 M NaCl) in the presence of d-fructose without a mediator. The current density reached as high as 14.3 ± 0.93 mA/cm² (at +500 mV), which was achieved in the presence of 200 mM d-fructose by immobilization of FDH on 2-mercaptoethanol-modified AuNP/carbon fiber paper electrodes.     

α‐Chiral Acetylenes Having an All‐Carbon Quaternary Center: Phase Transfer Catalyzed Enantioselective α Alkylation of α‐Alkyl‐α‐alkynyl Esters

Going through the phases : The title reaction was found to proceed by an initial base‐mediated isomerization to allenyl esters and subsequent phase transfer catalyzed alkylation at the α position of the ester (see scheme).

     

Diphenylprolinol Silyl Ether as a Catalyst in an Enantioselective,Catalytic Michael Reaction for the Formation of α,α‐Disubstituted α‐Amino Acid Derivatives

Direct and enantioselective : Diphenylprolinol silyl ether was found to catalyze the direct, asymmetric Michael reaction of 4‐substituted 2‐aryl‐2‐oxazoline‐5‐one and α,β‐unsaturated aldehydes, affording the chiral α,α‐disubstituted α‐amino acid derivatives with excellent enantioselectivity.

     

Scheduling of corrugated paper production

Corrugated paper is produced by gluing three types of papers of the same breadth. Given a set of orders, we first assign each order to one of the standard breadths, and then sequence those assigned to each standard breadth so that they are continuously manufactured from the three rolls of the specified standard breadth equipped in the machine called corrugator. Here we are asked to achieve multi-goals of minimizing total length of roll papers, total loss of papers caused by the differences between standard breadths and real breadths of the orders, and the number of machine stops needed during production. We use integer programming to assign orders to standard breadths, and then develop a special purpose algorithm to sequence the orders assigned to each standard breadth. This is a first attempt to handle scheduling problems of the corrugator machine.     

Evaluation of intrinsic compressibility of proteins by molecular dynamics simulation

Molecular dynamics simulation has been performed on five native proteins in water to evaluate their intrinsic isothermal compressibilities beta(T,int). To identify physical factors contributing to protein compressibility, a general method is presented for analyzing the compressibility of mechanically inhomogeneous systems. The value of beta(T,int) varies with protein species considerably: beta-lactoglobulin (14.15 x 10(-2) GPa(-1)) is more than twice as compressible as ribonuclease A (6.77 x 10(-2) GPa(-1)). Beta-lactoglobulin and myoglobin (13.95 x 10(-2) GPa(-1)) have similar values of beta(T,int), but the mechanisms responsible for them are significantly different. The volume fluctuations of internal cavities and the magnitudes of the crosscorrelation between them are the key factors determining beta(T,int) of proteins. Though the volume fractions of internal cavity for the five studied proteins are nearly equal to one another, the mean cavity compressibilities beta(T,cav) vary considerably with protein species and range from 0.35 to 0.69 GPa(-1), which are much smaller than those of normal organic liquids such as methanol, ethanol, and benzene and close to that of glycerol (0.55 GPa(-1)), a strongly associated liquid.