Sodium chloride-catalyzed oxidation of multiwalled carbon nanotubes for environmental benefit

A sodium chloride (NaCl) catalyst (0.1 w/w %) lowers the oxidation temperature of graphitized multiwalled carbon nanotubes: MWCNT-20 (diameter: 20-70 nm) and MWCNT-80 (diameter: 80-150 nm). The analysis of the reaction kinetics indicates that the oxidation of MWCNT-20 and MWCNT-80 mixed with no NaCl exhibits single reaction processes with activation energies of E(a) = 159 and 152 kJ mol(-1), respectively. The oxidation reaction in the presence of NaCl is shown to consist of two different reaction processes, that is, a first reaction and a second reaction process. The first reaction process is dominant at a low temperature of around 600 degrees C, while the second reaction process becomes more dominant than the first one in a higher temperature region. The activation energies of the first reaction processes (MWCNT-20: E(a1) = 35.7 kJ mol(-1); MWCNT-80: E(a1) = 43.5 kJ mol(-1)) are much smaller than those of the second reaction processes (MWCNT-20: E(a2) = 170 kJ mol(-1); MWCNT-80: E(a2) = 171 kJ mol(-1)). The comparison of the kinetic parameters and the results of the spectroscopic and microscopic analyses imply that the lowering of the oxidation temperature in the presence of NaCl results from the introduction of disorder into the graphitized MWCNTs (during the first reaction process), thus increasing the facility of the oxidation reaction of the disorder-induced nanotubes (in the second reaction process). It is found that the larger nanopits and cracks on the outer graphitic layers are caused by the catalytic effect of NaCl. Therefore, the NaCl-mixed samples showed more rapid and stronger oxidation compared with that of the nonmixed samples at the same residual quantity.     

Synthesis and structure of cyclic oligo(p-phenylene oxide)s, -(C6H4O)n- (n = 6-10)

Stepwise growth of oligo(p-phenylene oxide)s and cyclization via the Ullmann coupling reaction by using CuI/N,N-dimethylglycine afforded cyclic oligo(p-phenylene oxide)s, (n = 6-10). The structure of the new cyclophanes was determined by X-ray crystallography, which revealed that they have planar or slightly bent structures with diameters of 1.0-1.5 nm.     

Development of a ratiometric fluorescent zinc ion probe in near-infrared region, based on tricarbocyanine chromophore

Novel ratiometric fluorescent probes for Zn2+ in the near-infrared region, based on a tricarbocyanine chromophore, have been designed, synthesized, and evaluated. Upon addition of Zn2+, a 44 nm red shift of the absorption maximum was observed, which indicates that this probe could work as a ratiometric probe for Zn2+. This change is due to the difference in the electron-donating ability of the amine substituent before and after reaction with Zn2+. This fluorescence modulation of amine-substituted tricarbocyanines should be applicable to dual-wavelength measurement of various biomolecules or enzyme activities.     

Anisotropic siloxane-based monolith prepared in confined spaces

When bicontinuous gels are prepared via sol-gel method in a 2-dimensionally (2D) confined space, the gel skeletons in the vicinity of interface of a mold are elongated perpendicular to the interface. This phenomenon was attributed to the dynamic wetting of polymerizing siloxane phase onto the interface of the mold under gravity. In this paper, we report the successful preparation of monolithic columns with an oriented pillar structure in a variety of 2D confined spaces. Starting from a solution, which consists of methyltrimethoxysilane (MTMS), the macroporous structure is prepared in situ by a completely spontaneous process. In the oriented pillar structure, bicontinuous siloxane skeletons deformed or disappeared and most pillars are oriented along the direction of gravity. Gel morphologies with the pillar structure were examined by scanning electron microscopy (SEM) and laser scanning confocal microscopy (LSCM). Geometrical information on gel morphologies was numerically derived from the obtained 3D LSCM images.     

Cerasome as an infusible, cell-friendly, and serum-compatible transfection agent in a viral size

Alanine-based cationic lipid 1 having a (EtO)3SiCH2CH2CH2 group on the quaternized ammonium nitrogen forms a liposome which self-rigidifies via in situ sol-gel processes (Si-OEt + H2O --> Si-OH + EtOH followed by 2Si-OH --> Si-O-Si + H2O) on the surface. The resulting cerasome (partially ceramic- or silica-coated liposome) (60-70 nm) retains the integrity of such in the complexation with lucifarase-encoding plasmid DNA pGL3. The resultant pGL3 complex of infusible or monomeric cerasome in a viral size ( approximately 70 nm) exhibits a remarkable transfection performance toward HeLa and HepG2 cells with a 102-3-fold higher efficiency (relative to that of the nonsilylated reference lipid 2), minimized cytotoxicity, and serum compatibility. Reference lipid 2, i.e., alanine-based lipid having a simple quaternized ammonium headgroup, forms liposome (60-70 nm) which is less self-confined and more mobile undergoes DNA-induced fusion to give endocytosis-irrelevant and more toxic bigger (100-300 nm) particles. The silicon strategy thus provides a simple and widely applicable tool to overcome general problems associated with current technology of artificial gene delivery.     

Effects of pH of fermentation medium on biosynthesis of poly[(3-hydroxybutyrate)-co-(3-mercaptopropionate)] by Wautersia eutropha

A series of P(3HB-co-3MP)s with different 3MP unit content was biosynthesized by the fermentation of W. eutropha in a medium containing sodium gluconate and DTDP as carbon sources at different pH conditions ranging from pH 6.0 to 8.0. The P(3HB-co-3MP) samples were fractioned using the solvent/nonsolvent mixed solvent chloroform/heptane and the comonomer unit composition was investigated. It was found that W. eutropha produces P(3HB-co-3MP)s with extremely different 3MP unit content ranging from 3.6 to 70.0 mol-%, depending on the pH value of the fermentation medium. The copolyester samples produced in mild basic medium have a considerably narrower compositional distribution than the samples from acidic medium. The highest polymer yield was obtained at pH 8.0.DSC diagram for P(3HB-co-3MP)s biosynthesized in different pH medium. [graph: see text] DSC diagram for P(3HB-co-3MP)s biosynthesized in different pH medium.     

Synthetic transformation of ptychantin into forskolin and 1,9-dideoxyforskolin

Forskolin (1), a highly oxygenated labdane diterpenoid and an activator of adenylate cyclase, has been synthesized in 12 steps and 12% overall yield from ptychantin A (4), which has been isolated from liverwort Ptychanthus striatus in good yield. The 1alpha-hydroxy group was furnished by stereoselective reduction of the corresponding carbonyl group by sodium in t-BuOH. The 9alpha-hydroxy group was introduced stereoselectively by epoxidation of delta(9.11)-enolether. 1,9-Dideoxyforskolin (2), an inhibitor of glucose transporter, has been synthesized in 8 steps and 37% overall yield. The hydroxy group at C-1 was removed by solid-state thicarbonylimidazolation and subsequent radical cleavage.     

Measurement of hard X-ray coherence in the presence of a rotating random-phase-screen diffuser

A suitably large coherence area is important in coherent X-ray optics, when using techniques such as interferometry or phase contrast imaging (PCI). The work done by Suzuki using a prism interferometer to measure X-ray coherence at 12.4 keV [1] is here extended to consider the use of a diffuser at the bio-medical imaging energy of 25 keV. In order to achieve a broader, more even X-ray field and eliminate speckle, a spinning piece of paper may be used as a rotating random-phase screen to diffuse the hard X-ray beam, but this will concomitantly decrease the magnitude of the complex degree of second-order coherence. We also study the effect of source size and source-to-sample distance on coherence, where imaging area and required flux must be considered. Coherence measurements at the 20XU beamline at the SPring-8 synchrotron are compared to results from wave-optical computer modelling. These show that while the diffuser will decrease the magnitude of the complex degree of coherence, further free-space propagation will lessen this effect. In the design of an experiment, the collimating slit size and use of a diffuser must therefore be balanced with distance from the source, in order to maximise coherence while maintaining the desired field of view and exposure time.     

Topological Radon transforms and degree formulas for dual varieties

We give a simpler and purely topological proof of Ernström's class formula (1997) for the degree of dual varieties. Our new proof also allows us to obtain a formula describing the degrees of the associated varieties studied by Gelfand, Kapranov and Zelevinsky (1994).