ESR study of radical sites in crystalline texture of irradiated polypropylene by means of nitric acid etching

Bulk-crystallized isotactic polypropylene samples with different crystalline textures were etched by fuming nitric acid to remove the disordered region. The radicals produced by irradiation of γ-rays or ultraviolet light on these etched samples in vacuum at liquid nitrogen temperature were investigated by the ESR method. A triplet spectrum in addition to the original spectrum of polypropylene radicals was separated for the etched samples. It was concluded that this triplet was caused by radical species associated with nitro groups introduced on the surface of the crystalline residues by etching. The difference in the intensity of this triplet among the samples was ascribed to differences in crystalline textures and interpreted in a quantitative way. The concentration of polypropylene radicals corrected for the triplet differed among the quenched, annealed, and cold-drawn samples and the sample annealed one after drawing. This fact was interpreted on the basis of the hypothesis that radical sites were almost concentrated in the defects of crystal domain. The well known nonet spectrum, which can be observed at liquid nitrogen temperature after annealing the irradiated samples at room temperature, was also confirmed to be attributable to the defects of crystals. The behavior of free methyl radicals induced by ultraviolet irradiation was also found to be strongly dependent on the state of aggregation of the polymer molecules.     

Giant reduction in dynamic modulus of kappa-carrageenan magnetic gels

Effects of magnetization on the complex modulus of kappa-carrageenan magnetic gels have been investigated. The magnetic gel was made of a natural polymer, kappa-carrageenan, and a ferrimagnetic particle, barium ferrite. The complex modulus was measured before and after magnetization of the gel by dynamic viscoelastic measurements with a compressional strain. The gels showed a giant reduction in the storage modulus of approximately 10(7) Pa and also in the loss modulus of approximately 10(6) Pa due to magnetization. The reduction increased with increasing volume fraction of ferrite, and it was nearly independent of the frequency. It was also found that the change in the modulus was nearly independent of the magnetization direction and irradiation time of the magnetic fields to the gel. The magnetic gels demonstrating the giant reduction in the dynamic modulus showed a large nonlinear viscoelastic response. It was observed that the magnetic gel was deformed slightly due to magnetization. The observed giant complex modulus reduction could be attributed to the nonlinear viscoelasticity and deformation caused by magnetization. Magnetism, nonlinear viscoelasticity, and effects of magnetization on the morphological and shape changes were discussed.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

α‐Chiral Acetylenes Having an All‐Carbon Quaternary Center: Phase Transfer Catalyzed Enantioselective α Alkylation of α‐Alkyl‐α‐alkynyl Esters

Going through the phases : The title reaction was found to proceed by an initial base‐mediated isomerization to allenyl esters and subsequent phase transfer catalyzed alkylation at the α position of the ester (see scheme).

     

Hydroxyapatite-supported copper(II)-catalyzed azide-alkyne [3+2] cycloaddition with neither reducing agents nor bases in water

Copper(II)-exchanged hydroxyapatite, prepared by ion-exchanging of Ca(II) in calcium hydroxyapatite [Ca₁₀(PO₄)₆(OH)₂] with Cu(NO₃)₂ at 70 °C in water, functions as a reusable heterogeneous catalyst with neither reducing agents nor bases for azide-alkyne [3+2] cycloaddition at 50 °C in water under air.     

Dependence of selective enclathration on types of cholic acid crystals

Competitive recrystallizations of cholic acid (CA) from 1:1 binary mixtures of seven mono-substituted benzenes are demonstrated. The order of preference for guests to be incorporated into the cholic acid crystals are as follows: benzene, toluene > n-amylbenzene, n-hexylbenzene > ethylbenzene, n-propylbenzene, n-butylbenzene. These seven compounds afford bilayer type inclusion crystals that are classified into four types based on the host frameworks and host-guest stoichiometries. The order of selective enclathration corresponds to the four types as follows: 1:1 alpha G > 2:1 alpha G > 1:1 beta T or 2:1 alpha T. The preference for the alpha G type was also confirmed by investigating the host frameworks of the crystals obtained from binary mixtures. The dependence of the selectivity on the different types of CA crystals can be understood in terms of the fit of the guest molecule in the host cavity.     

Supramolecular Templating of Mesopores in Phase-Separating Silica Sol-Gels Incorporated with Cationic Surfactant

Silica gels with hierarchical macropores and mesopores have been prepared by inducing phase separation in the alkoxide-based sol-gel system with an addition of alkyltrimethylammonium salt. Narrowly distributed mesopores were observed in the heat-treated gel samples possibly as a result of supramolecular templating of silica oligomers in the reacting solution. The ionic attractive interaction and hydrophobicity of the attached alkyl group cooperatively determined the phase separation tendency. No indication of long-range order of the mesopores was obtained.     

Effect of pre‐treatment of sugarcane bagasse on the cellulose solution and application for the cellulose hydrogel films

Sugarcane bagasse was used as a cellulose resource, and the transparent cellulose hydrogel films were obtained from the purified cellulose by phase inversion process without chemical cross‐linking, when the dissolved cellulose in lithium chloride/N,N‐dimethyl acetamide was transformed into the solid film. On these processes, bagasse was pre‐treated by 10 wt% sodium hydroxide in the absence and presence of bleaching of 10 vol% sodium hypochlorite (NaOCl) solution in order to obtain cellulose fibers. Here, the bleaching temperature was varied from 40 to 50°C. The effect of pre‐treatment conditions on the resultant cellulose solution and hydrogel films was investigated. It was seen that strong bleaching removed most of lignin component from the bagasse. However, viscosity and size exclusion chromatogram of the cellulose indicated that this operation decreased average molecular weight of the cellulose fibers from 2.1 × 10⁶ to 4.8 × 10⁵. These property changes of fibers also caused increase of water content and weakening of mechanical strength of the resultant hydrogels. In addition, scanning probe microscopy in wet state revealed that the porous fiber network structure in the hydrogel was greatly influenced by bleaching with NaOCl. The average pore size of fiber network was decreased from 8.1 to 5.9 nm as the NaOCl treatment was at 50°C, because of expanded fibers in the swollen hydrogel. Copyright © 2016 John Wiley & Sons, Ltd.     

Pressure response of Raman spectra of water and its implication to the change in hydrogen bond interaction

In situ Raman spectroscopic measurements of water in the region of OH vibration were conducted up to 0.4 GPa at 23 and 52 degrees C. The frequencies of the decomposed OH stretching bands initially decreased with increasing pressure, reached a minimum at 0.15 GPa and increased up to 0.3 GPa and then decreased, which corresponds to the variations of the strength of hydrogen bonding. This variation was observed at 23 degrees C, but not at 52 degrees C, which suggests a change in pressure dependence on the hydrogen bond interaction between these two temperatures. Based on the equilibration model between hydrogen-bonded and nonhydrogen-bonded molecules, the present experimental results indicate that the pressure variation of the viscosity depends on the ratio of hydrogen-bonded molecules, rather than the strength of hydrogen bonding between molecules.     

Catalytic asymmetric total synthesis of (+)-lactacystin

Total synthesis of (+)-lactacystin, a potent and selective proteasome inhibitor, was accomplished using a catalytic enantioselective Strecker reaction of a ketoimine as the initial key step. An enone-derived N-phosphinoyl ketoimine 7 was selected as a stable masked alpha-hydroxy ketoimine analogue. Excellent enantioselectivity (98% ee) and practical catalyst activity were produced under the optimized catalyst preparation method using 2.5 mol % Gd{N(SiMe3)2}3 as a metal source and 3.8 mol % D-glucose-derived ligand 8. This reaction was conducted on a 5 g scale. The chiral tetrasubstituted C-5 carbon efficiently controlled the stereochemistry of the other three chiral centers of lactacystin. Chelation-controlled Meerwein-type reduction of ketone 5 using i-PrMgBr (originally reported by Kang in a related substrate) selectively produced the desired secondary alcohol at the C-9 position. The C-6 hydroxy and C-7 methyl groups were introduced via a silyl conjugate addition followed by the Tamao oxidation and Donohoe methylation, respectively, in a highly stereoselective manner. A practical amount of enantiomerically pure clasto-lactacystin beta-lactone (2), the biologically active form of (+)-lactacystin, can be synthesized using this route. clasto-Lactacystin beta-lactone (2) was converted to (+)-lactacystin following the reported procedure.