A new-type photoreaction of a carbonyl compound: Part 2. Photoinduced ω-bond dissociation in p-halomethylbenzophenone studied by time-resolved EPR technique and laser flash photolysis

Photodissociation of the carbon-X (X = Br and Cl) bonds in p-bromo- and p-chloromethylbenzophenone (BMBP and CMBP) in solution were investigated by time-resolved EPR and laser flash photolysis techniques. BMBP and CMBP were found to undergo ω-bond cleavage to yield the p-benzoylbenzyl radical (BBR) at 295 K, and the quantum yields (Φ_BBR) were determined. The CIDEP signal originated from BBR formed upon decomposition of CMBP was obtained while that for BMBP was absent. By using triplet sensitization of acetone, the efficiencies (_BBR) of the CX bond fission in the triplet states of BMBP and CMBP were determined. The agreement between the Φ_BBR and _BBR values for CMBP indicates that the CCl bond dissociation occurs only in the triplet state. In contrast to CMBP, the cleavage of the CBr bond in BMBP upon direct excitation was concluded to be the event only in the excited singlet state without triplet formation, whereas the triplet state was also reactive for ω-bond dissociation. The rate of CBr bond dissociation seemed to be greater than that of intersystem crossing from the S₁ to the T₁ state. Schematic energy diagrams of the excited states of BMBP and CMBP were shown, and the reaction profiles were discussed from the viewpoint of the CX bond enthalpies.     

Reaction of carboxamide with Cu2Oisonitrile complex; formation of a new chelated copper(I) complex

Reaction of carboxamides with Cu₂O in the presence of t-butyl isocyanide gave new chelated copper(I) complexes, which probably are formed by the insertion of t-butyl isocyanide into the coppernitrogen bond of copper(I) amide isonitrile complexes, which were initially produced from the carboxamides and Cu₂Ot-butyl isocyanide complex. The same chelated copper(I) complexes were prepared more readily by the reaction of the corresponding N-trimethylsilyl-carboxamides with Cu₂Ot-butyl isocyanide complex. Reactions of the copper(I) complexes thus obtained with alkylating agents, such as alkyl halides, alkyl tosylates and triethyloxonium tetrafluoroborate, also were described.     

Analysis of polymerization rates in radical polymerization with primary radical termination of some methacrylates

Polymerization rates in polymerizations with primary radical termination of ethyl methacrylate, β-phenylethyl methacrylate, β-methoxyethyl methacrylate, and phenyl methacrylate initiated by 2,2'-azobis-(2,4-dimethylvaleronitrile) at 60°C were analyzed by using a simple linear equation. The values obtained of k_ti/k_ik_p (where k_ti is the primary radical termination rate constant, k_i is the rate constant of addition on to monomer of primary radical, and k_p is the propagation rate constant) on these analyses are discussed on the theoretical base.     

Semi-industrial isolation of salicin and amygdalin from plant extracts using slow rotary counter-current chromatography

Salicin in the bark extract of Salix alba and amygdalin in the fruit extract of Semen armeniacae were each separated by slow rotary counter-current chromatography (SRCCC). The apparatus was equipped with a 40-L column made of 17 mm i.d. convoluted Teflon tubing. A 500g amount of crude extract containing salicin at 13.5% was separated yielding 63.5 g of salicin at 95.3% purity in 20h using methyl tert-butyl ether-l-butanol (1:3) saturated by methanol-water (1:5) as a stationary phase and methanol-water (1:5) saturated by methyl tert-butyl ether-1-butanol (1:3) as a mobile phase. A 400g amount of crude extract containing amygdalin at 55.3% was isolated to yield 221.2g of amygdalin at 94.1% purity in 19h using ethyl acetate-1-butanol (1:2) saturated by water as a stationary phase and water saturated by ethyl acetate-1-butanol (1:2) as a mobile phase. The flow rate of the mobile phase was 50 ml/min. The results show that industrial SRCCC separation of salicin and amygdalin is feasible using a larger column at a higher flow rate of the mobile phase.     

Preparation and identification of bis(formylmethano)[60]fullerene isomers: the first systematic study on bifunctionalized [60]fullerenes with dissymmetric addends

Fourteen isomers of bis(formylmethano)C₆₀ were isolated and characterized. A mixture of the bisadducts was obtained by the reaction of C₆₀ with an α-formylsulfonium ylide, and then separated into 15 fractions by preparative HPLC, preparative TLC, and recycling preparative HPLC. Fourteen of the fifteen fractions were found to consist of a single isomer, respectively, which were assigned to the trans-2 (3 diastereo-isomers), trans-3 (3 diastereo-isomers), trans-4 (3 diastereo-isomers), equatorial (2 diastereo-isomers), and cis-2 (3 diastereo-isomers) bisadducts by the comparison of their UV/vis spectra with those of the bisadducts obtained by the Bingel-Hirsch reaction. The ¹H and ¹³C NMR analysis, the transformation of the formyl groups, and the dipole moment calculation clarified the stereochemistry of the substituents on the two cyclopropane bridge-head carbons (in/in, in/out, and out/out).     

Enantioface-selective palladium-catalyzed silaboration of allenes via double asymmetric induction

Enantioenriched beta-borylallylsilanes were synthesized by palladium-catalyzed enantioface-selective addition of the silicon-boron bond to terminal allenes using a palladium catalyst possessing a chiral monodentate phosphine ligand. Use of a silylborane bearing a chiral auxiliary on the boron atom was beneficial to gain enantioface selectivities as high as 96% de.     

Ti(II)-mediated domino cyclization of 2-functionalized 1-halo-2,n-enynes (n = 7, 8) to bicyclic compounds

The reaction of 2-functionalized 1-halo-2,n-enynes (n = 7 or 8) with a divalent titanium reagent, Ti(O-i-Pr)₄/2i-PrMgCl, proceeded in a domino fashion to afford bicyclic compounds in good yields.     

Cope elimination and complexation of poly(dimethylaminoethyl methacrylate N-oxide)

Poly(dimethylaminoethyl methacrylate N-oxide) (poly(DMAEMNO)) was prepared by oxidation of poly(dimethylaminoethyl methacrylate) with hydrogen peroxide in methanol. From thermogravimetric and IR spectroscopic investigations Cope elimination of amine oxide group in poly(DMAENO) was found to occur at 120–150°C. The postpolymerization of partially pyrolyzed polymer carrying vinyl ester group as pendant was performed with azobisisobutyronitrile at 60°C in methanol to give cross-linked polymer that was found to form hydrogel. Poly(DMAEMNO) gave metal–polymer complexes with CuCl₂, ZnCl₂, and CoCl₂. Cobalt–polymer complex had a constitution of 1:2 of metal ion to amine oxide group, while copper– and zinc–polymer complexes seemed to have structures of 1:1 and 1:2 of metal ion to amine oxide group. Furthermore, polymer complexes of poly(DMAEMNO) with poly(methacrylic acid) and poly(acrylic acid) were found to be formed by mixing aqueous solutions of both polymers and also by radical polymerization of the acid monomers in the presence of poly(DMAEMNO). From elemental analysis, thermogravimetric investigation, and measurement of turbidity it was concluded that the resulting polymer–polymer complexes contained more than one acid monomer unit per one N-oxide unit.     

Synthesis, structure, and reactivity of novel 3,4-diphosphacyclobutenes bearing silyl groups

[reaction: see text] Copper-mediated homocoupling of sterically hindered 2-(2,4,6-tri-tert-butylphenyl)-1-trialkylsilyl-2-phosphaethenyllithiums afforded 1,2-bis(trialkylsilyl)-3,4-diphosphacyclobutenes (1,2-dihydrodiphosphetenes) through a formal electrocyclic [2+2] cyclization in the P=C-C=P skeleton as well as 2-trimethylsilyl-1,4-diphosphabuta-1,3-diene. Reduction of 1,2-bis(trimethylsilyl)-3,4-diphosphacyclobutenes followed by quenching with electrophiles afforded ring-opened products, (E)-1,2-bis(phosphino)-1,2-bis(trimethylsilyl)ethene and (Z)-2,3-bis(trimethylsilyl)-1,4-diphosphabut-1-ene. The structures of the ring-opened products indicated E/Z isomerization around the C=C bond after P-P bond cleavage of 5, and the isomerization of the P-C=C skeleton. Ring opening of 1,2-bis(trimethylsilyl)-3,4-diphosphacyclobutenes affording (E,E)- and (Z,Z)-1,4-diphosphabuta-1,3-dienes was observed upon desilylation.     

De novo design, synthesis, and function of semiartificial myoglobin conjugated with coiled-coil two-alpha-helix peptides

The introduction of a flavin chromophore on the myoglobin (Mb) surface and an effective electron-transfer (ET) reaction through the flavin were successfully achieved by utilizing the self-assembly of heterostranded coiled-coil peptides. We have prepared a semiartificial Mb, named Mb-1alphaK, in which an amphiphilic and cationic alpha-helix peptide is conjugated at the heme propionate (Heme-1alphaK). Heme-1alphaK has a covalently bound iron-protoporphyrin IX (heme) at the N terminus of a 1alphaK peptide sequence. This sequence was designed to form a heterostranded coiled-coil in the presence of a counterpart amphiphilic and anionic 1alphaE peptide sequence in a parallel orientation. Two peptides, Fla(1)-1alphaE and Fla(31)-1alphaE, both incorporating a 10-methylisoalloxazine moiety as an artificial flavin molecule, were also prepared (Fla=2-[7-(10-methyl)isoalloxazinyl]-2-oxoethyl). Heme-1alphaK was successfully inserted into apomyoglobin to give Mb-1alphaK. Mb-1alphaK recognized the flavin-modified peptides and a two-alpha-helix structure was formed. In addition, an efficient ET from reduced nicotinamide adenine dinucleotide to the heme center through the flavin unit was observed. The ET rate was faster in the presence of Fla(1)-1alphaE than in the presence of Fla(31)-1alphaE or the equivalent molecule that has no peptide chain. These results demonstrate that the introduction of a functional chromophore on the Mb surface can be achieved by using specific peptide-peptide interactions. Moreover, the dependence of the ET rate on the position of the flavin indicated that the distance between the heme active site and the flavin chromophore was regulated by the three-dimensional structure of the designed polypeptide.