Phase Separation in Sol-Gel System Containing Mixture of 3- and 4-Functional Alkoxysilanes

The phase separation behavior of gelling systems containing the mixture of 3-functional and 4-functional alkoxysilanes has been investigated. The relation between the starting composition and resultant macroporous morphology was examined using tetramethoxysilane (TMOS) and vinyltrimethoxysilane (VTMS) as starting alkoxysilanes, formamide (FA) as an additive, under an acidic condition. Up to TMOS:VTMS molar ratio of 0.5:0.5, the phase relation remained almost unchanged from that of pure TMOS system which exhibits morphology with well-defined co-continuous macropores in a very limited concentration region. On the VTMS-rich side typically TMOS:VTMS = 0.2:0.8, however, the co-continuous macroporous morphology was obtained in a broader composition range than those of either pure TMOS or VTMS system. A dome-like pseudo binary region was obtained with the two-phase region extending toward FA-rich direction. The domain size and pore volume of the gels with macroporous morphology could be controlled by alkoxide:water ratio and total solvent fraction, respectively.     

Application of ion-exchange cartridge clean-up in food analysis IV. Confirmatory assay of benzylpenicillin, phenoxymethylpenicillin, oxacillin, cloxacillin, nafcillin and dicloxacillin, in bovine tissues by liquid chromatography-electrospray ionization tandem mass spectrometry

A multiresidue analytical method was developed for the confirmation of benzylpenicillin (PCG), phenoxymethylpenicillin (PCV), oxacillin (MPIPC), cloxacillin (MCIPC), nafcillin (NFPC) and dicloxacillin (MDIPC) in bovine tissues using electrospray ionization liquid chromatography-tandem mass spectrometry (LC-ESI-MS-MS) with a product ion scan mode. All penicillins gave [M-H]-, [M-H-CO2]- and [M-H-141]- as the product ion, when [M-H]- was selected as the precursor ion. Combination of an ion-exchange cartridge clean-up and the LC-ESI-MS-MS method can reliably identify all of these penicillins fortified at a concentration of 0.05 mg/kg in bovine tissues, including liver, kidney and muscle. The limits of confirmation satisfy the maximum residue limits for each of the penicillins established by the World Health Organization, US Food and Drug Administration, European Union and Japan.     

Measurements of 127I M?ssbauer spectra for iodine compounds

127I M?ssbauer spectra of good quality were obtained at 20 K using a Zn127mTe source produced by high flux neutron irradiation of 66Zn-126Te at reactor core. The M?ssbauer spectra for KI and some iodine(III) compounds with absorption intensity of about 5% suggest that the 127I M?ssbauer spectroscopy is useful in elucidating the bonding nature of the iodine compounds. Preparative method of the M?ssbauer source and experimental technique are reported in detail.     

Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

Synthesis and properties of bowl‐shaped homotriazacalix[3 and 6] arenes and the acyclic analogues

Bowl‐shaped chiral homotriazacalixarenes were prepared by the cyclization reactions of chiral triamines with three equimolar amounts of bis(chloromethyl) phenols or bis(chloromethyl) phenol‐formaldehyde dimers in moderate yields. The corresponding acyclic phenol‐formaldehyde oligomers were also synthesized. The structural analysis of the macrocycles by nmr and circular dichroism spectra imply the existence of chiral transmission from the point chirality of the cysteine bridge to the cyclophane moiety. Their cyclic and acyclic compounds have a π‐base cavity large enough to include the ammonium ion.     

Characterization and quantitation of clarithromycin polymorphs by powder X-ray diffractometry and solid-state NMR spectroscopy

Characterization of clarithromycin polymorph was performed by solid-state cross polarization and magic angle spinning (CP/MAS) 13C-NMR spectroscopy. Two polymorphs, form II and form I, of clarithromycins indicated characteristic resonances of C1 carbonyl carbon at 176.2 and 175.2 ppm, respectively. Since each peak of C1 carbon was well separated in the spectrum of the two polymorphs, we performed quantitative analysis of the polymorphic fraction from the peak area of these peaks. The peak area of form I was found to linearly increase with an increase of its content, with a correlation coefficient of above 0.99. Solid-state NMR was found to be a useful technique to determine the characteristics of the polymorphic forms.     

Palladium(0) complexes coordinated with substituted olefins and tertiary phosphine ligands

New palladium(0) complexes with a variety of coordinated olefins [Pd(olefin)(PMePh₂)₂] (II) (olefin = styrene, ethyl methacrylate, methyl methacrylate, methyl acrylate, methacrylonitrile, and dimethyl maleate), were prepared by the reactions of [PdEt₂(PMePh₂)₂] (I) with corresponding olefins in toluene. These complexes were characterized by means of elemental analysis, IR and ¹H NMR spectroscopy and the chemical reactions. The dissociation of the coordinated olefin from complex II in solution was confirmed by spectroscopic studies of [Pd(mma)(PMePh₂)₂] (mma = methyl methacrylate). From the variable temperature NMR study, kinetic parameters for the dissociation process were determined as E_a = 7 kcal/mol, and ΔS³ (293 K) = -30 cal/deg · mol. Some new hydrido complexes, [Pd(H)ClL₂] (IV) (L = PMePh₂, PEtPh₂ and PEt₂Ph), were prepared by the reactions of [Pd(olefin)L₂] with dry HCl.     

Synthesis and properties of new polyesters having tetrahydrofuran rings in their main chains

New polyesters 6a–6c consisting of 2,4-linked tetrahydrofuran rings were synthesized by bulk polycondensation of methyl trans- and cis-4-hydroxytetrahydrofuran-2-carboxylates ( 5a and 5b ) and a stereoisomeric mixture of methyl 4-hydroxy-5-methyltetrahydrofuran-2-carboxylate ( 5c ) at high temperature. These monomers were prepared from methyl glycolate or methyl lactate and diethyl maleate through a four-step reaction sequence. The polycondensation was carried out without solvent at different temperatures ranging from 150 to 220°C. Titanium isopropoxide was most effective among the catalysts examined, giving polyesters with number-average molecular weights up to 2 × 10⁴. Polyester 6a consisting of trans-2,4-linked tetrahydrofuran rings was soluble in trifluoroacetic acid and a mixed solvent of chloroform and methanol (10/1, v/v). Polyester 6b composed of cis-2,4-linked tetrahydrofuran rings was soluble in dimethyl sulfoxide and dimethylformamide in addition to the two solvents for 6a . Polyester 6c with 5-methyl-substituted tetrahydrofuran rings was composed of a mixture of stereoisomeric units and thus was soluble in a variety of solvents including chloroform, tetrahydrofuran, acetonitrile, dimethyl sulfoxide, and dimethylformamide. The glass transition temperatures of 6a, 6b , and 6c determined by DSC were 109, 88, and 66°C. These polyesters were found to be very slowly hydrolyzed in a neutral phosphate buffer solution at ambient temperature. © 1993 John Wiley & Sons, Inc.     

Global aspect of steady-states for competitive-diffusive systems with homogeneous Dirichlet conditions

This paper is concerned with the competitive-diffusive systems

$\text{u}{}_{\mathrm{t}}\text{=d}{}_{\mathrm{l}}\text{u}{}_{\mathrm{xx}}\text{+(a}{}_{\mathrm{l}}\text{?b}{}_{\mathrm{l}}\text{u?c}{}_{\mathrm{l}}\text{v)u}\text{v}{}_{\mathrm{t}}\text{=d}{}_2\text{v}{}_{\mathrm{xx}}\text{+(a}{}_2\text{?b}{}_2\text{u?c}{}_2\text{u)v}\text{(x, t) ? (0, 1) × (0, ∞)}$

, with homogeneous Dirichlet boundary conditions. From a global bifurcation view point, the dependency of steady-states on the parameters a_i, b_i, c_i and d_i (i = 1, 2) is investigated. In particular, bifurcation of coexist ence solutions amd their stabilities are our main interests.