Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid)

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.     

Release from or through a wax matrix system. II. Basic properties of release from or through the wax matrix layer

In order to examine basic properties of release from and through wax matrix layer, reservoir device matrix tablet was prepared from a physical mixture of hydrogenated caster oil and drug that was the same one in the reservoir. Release process could be divided into two stages. The first stage was the formation process of water channel by dissolving the drug in the wax matrix layer, and dissolved drug was released from the matrix layer following the square-root-of-time law equation. Hence, the drug penetration coefficient and tortuosity in the matrix layer were estimated. The second stage was the zero order release process of drug in the reservoir through the wax matrix layer. The release rate constant was calculated from the slope of line. Hence, the drug permeability coefficient and tortuosity were estimated. Fundamentally, tortuosity can not be expressed by some meaningful factors, and is obtained as an experimental result. By preparing wax matrix system from a physical mixture other than melted granule method, it was suggested that the matrix structure was uniform three-dimensionally. As a result, tortuosity could be expressed by a function of porosity, because unrecognized factors such as the surface coverage and thickness of melted wax on the soluble component should not be involved.     

High-performance liquid chromatography of tyrosine-containing peptides by pre-column derivatization involving formylation followed by fluorescence reaction with 1,2-diamino-4,5-dimethoxybenzene

A pre-column fluorescence derivatization method is described for the high-performance liquid chromatographic determination of tyrosine-containing peptides. A tyrosyl residue in the peptide is first formylated in an alkaline medium in the presence of chloroform, and the resulting aldehyde is then converted into a fluorescent derivative by reaction with 1,2-diamino-4,5-dimethoxybenzene. The derivative is separated on a reversed-phase column (LiChrosorb RP-18) by isocratic elution with an aqueous acetonitrile-containing potassium chloride-hydrochloric acid buffer (pH 2.2) and sodium 1-hexanesulphonate. The method is selective and fairly sensitive; the lower limits of detection for the tyrosine-containing peptides tested are in the range 3.4-26.2 pmol in a 100-microliter injection volume.     

Analyses of structure of photoreceptor organelle and blepharismin-associated protein in unicellular eukaryote Blepharisma

In the ciliated protozoan Blepharisma, step-up photophobic response is believed to be mediated by a novel type of photosensory pigment known as "blepharismins" (BL) that are contained in the pigment granules located just beneath the plasma membrane. We examined the ultrastructure of the pigment granules by freeze-fracture and thin-section electron microscopy and proposed a schematic diagram showing the granules' three-dimensional inner membranous structure. Some of the BL are suggested to be associated with 200 kDa membrane protein. High-pressure liquid chromatography analysis of pigment species associated with 200 kDa protein obtained from blue forms of Blepharisma (oxyblepharisma) revealed that the 200 kDa protein was associated with five types of oxyblepharismin. The fluorescence intensity was increased when the pigments were dissociated from the 200 kDa protein. The result supports the hypothesis that the pigment-200 kDa complex is able to transduce light energy into signals mediating the photobehavior of Blepharisma.     

Dicopper-dioxygen complex supported by asymmetric pentapyridine dinucleating ligand

A dicopper(I) complex supported by a novel asymmetric pentapyridine dinucleating ligand, consisting of tetradentate and tridentate metal-binding sites, has been synthesized and characterized. The dicopper(I) complex reacted with molecular oxygen at a low temperature to give an unprecedented mu-peroxo dicopper(II) complex presumably having a mu-eta1:eta2 binding mode, the spectroscopic features and the reactivity of which have been explored in detail.     

Efficiently Synthesizing Lacto-Ganglio-Series Gangliosides by Using a Glucosyl Ceramide Cassette Approach: The Total Synthesis of Ganglioside X2

The first total synthesis of the hybrid ganglioside X2, which consisted of a highly branched octasaccharide and ceramide moieties, was accomplished by using a glucosyl ceramide cassette approach. With a disaccharyl donor, the heptasaccharide could not be constructed by glycosylation of the C4 hydroxy group of galactose at the reducing end of the pentasaccharide. In contrast, through an alternative approach with two branched glycan units, a GM2-core trisaccharide, and a lacto-ganglio tetrasaccharide, the heptasaccharyl donor could be prepared and subsequently joined with a glucosyl ceramide cassette to afford the protected ganglioside, X2. Finally, global deprotection completed the synthesis, thus affording the pure ganglioside X2.     

Single-Round DNA Aptamer Selection by Combined Use of Capillary Electrophoresis and Next Generation Sequencing: An Aptaomics Approach for Identifying Unique Functional Protein-Binding DNA Aptamers

In DNA aptamer selection, existing methods do not discriminate aptamer sequences based on their binding affinity and function and the reproducibility of the selection is often poor, even for the selection of well-known aptamers like those that bind the commonly used model protein thrombin. In the present study, a novel single-round selection method (SR-CE selection) was developed by combining capillary electrophoresis (CE) with next generation sequencing. Using SR-CE selection, a successful semi-quantitative and semi-comprehensive aptamer selection for thrombin was demonstrated with high reproducibility for the first time. Selection rules based on dissociation equilibria and kinetics were devised to obtain families of analogous sequences. Selected sequences of the same family were shown to bind thrombin with high affinity. Furthermore, data acquired from SR-CE selection was mined by creating sub-libraries that were categorized by the functionality of the aptamers (e. g., pre-organized aptamers versus structure-induced aptamers). Using this approach, a novel fluorescent molecular recognition sensor for thrombin with nanomolar detection limits was discovered. Thus, in this proof-of-concept report, we have demonstrated the potential of a “DNA Aptaomics” approach to systematically design functional aptamers as well as to obtain high affinity aptamers.     

Methylol‐functional benzoxazines as precursors for high‐performance thermoset polymers: Unique simultaneous addition and condensation polymerization behavior

A new class of high‐performance resins of combined molecular structure of both traditional phenolics and benzoxazines has been developed. The monomers termed as methylol‐functional benzoxazines were synthesized through Mannich condensation reaction of methylol‐functional phenols and aromatic amines, including methylenedianiline (4,4′‐diaminodiphenylmethane) and oxydianiline (4,4′‐diaminodiphenyl ether), in the presence of paraformaldehyde. For comparison, other series of benzoxazine monomers were prepared from phenol, corresponding aromatic amines, and paraformaldehyde. The as‐synthesized monomers are characterized by their high purity as judged from ¹H NMR and Fourier transform infrared spectra. Differential scanning calorimetric thermograms of the novel monomers show two exothermic peaks associated with condensation reaction of methylol groups and ring‐opening polymerization of benzoxazines. The position of methylol group relative to benzoxazine structure plays a significant role in accelerating polymerization. Viscoelastic and thermogravimetric analyses of the crosslinked polymers reveal high T_g (274–343 °C) and excellent thermal stability when compared with the traditional polybenzoxazines. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012