The first synthesis of a methano[60]fullerene with an electron-donating group at the methano-bridge carbon: synthesis and reaction of aminomethano[60]fullerene

[reaction: see text] Aminomethano[60]fullerene was synthesized for the first time as a trifluoromethanesulfonic acid salt by applying the Curtius rearrangement of azidocarbonylmethano[60]fullerene as the key reaction. Aminomethano[60]fullerene thus obtained was found to be able to react with various acyl chlorides to afford the corresponding amides.     

Aromaticity of planar boron clusters confirmed

Low-energy boron clusters are characterized by two-dimensional geometry. Aromaticity of these planar boron clusters was established in terms of topological resonance energy (TRE). All planar boron clusters were found to be highly aromatic with large positive TREs even if they have 4n pi-electrons. Aromaticity must therefore be the origin of unusual planar or quasi-planar geometry. Thus, the aromaticity concept is as useful in boron chemistry as it is in general organic chemistry. It is evident that the Hückel 4n + 2 rule of aromaticity should not be applied to such polycyclic pi-systems. Some of the boron clusters are in the triplet electronic state to attain higher aromaticity. Multivalency and electron deficiency of boron atoms are responsible for lowering the energies of low-lying pi molecular orbitals and then for enhancing aromaticity. For polycyclic pi-systems, paratropicity does not always indicate antiaromaticity.     

Photolabile and paramagnetic reagents for the investigation of transmembrane signaling events.

To investigate the dynamics of membrane processes that may be integral components of specific transmembrane signaling events we have synthesized several novel paramagnetic probes and their photoreactive counterparts. The structure of these probes was designed to (1) restrict "flipping" across the membrane bilayer; (2) contain paramagnetic or photoreactive moieties that could be placed at specific depths within the bilayer; (3) provide information about membrane structure as well as dynamics of protein movement; and (4) in the case of the photoreactive probes, be of high specific radioactivity. The molecules described in this paper consist of amino acid, dipeptide, or carbohydrate groups attached to arylazide- or nitroxide-bearing fatty acids. The synthesis and initial characterization of these membrane probes is described.     

Highly sensitive determination of a polymeric hindered amine light stabilizer in polypropylene by reactive thermal desorption-gas chromatography using nitrogen-specific detection

Highly sensitive and specific determination of trace amounts of a polymeric hindered amine light stabilizer (HALS) in polypropylene (PP) materials could be established by improving reactive thermal desorption-gas chromatography (RTD-GC) in the presence of an organic alkali, tetramethylammonium hydroxide. By using nitrogen-phosphorus detection, highly selective detection of the HALS-related components was attained. In addition, the use of a polar poly(ethylene glycol) separation column alleviated the adsorption of minor specific pyrolysis products. This modified RTD-GC method allowed the determination of the polymeric HALS (Mr 1900) in PP even for trace concentrations between 100 and 500 ppm, through observing selectively the characteristic products containing a tetramethylpiperidine moiety, which had been impossible to detect under the previous RTD-GC conditions using a non-polar separation column and conventional flame ionization detection.     

Preparation of Silicalite-1 Within Macroporous Silica Glass

Microcrystalline silicalite-1 was formed on the inner surface of macroporus silica glasses prepared by the sol-gel process. By heating a homogeneous precursor solution at 100°C under a hydrothermal condition, 2–5 m of plate-like particles of silicalite-1 were deposited. With an increase of mixing time of the precursor solution, the number of silicalite-1 particles increased, accompanied by the relative decrease of the particle size. Depending on the temperature and the duration of the heat-treatment of the macroporous silica, the amount of deposited silicalite-1 varied. Below 1000°C, the amount increased with the heat-treatment temperature, as a result of the competition between the precipitation of silicalite-1 and the dissolution of silica from the macroporous silica glass under a strongly basic condition. On the other hand, above 1000°C the amount of deposited silicalite-1 decreased in accordance with the decrease of the macropore diameter by the heat-treatment, because of the limited transport of the dissolved silicate species through the smaller macropores.     

Screening method for organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine based on intramolecular excimer-forming fluorescence derivatization

A simple screening method of organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine is described. This method is based on an intramolecular excimer-forming fluorescence derivatization with a pyrene reagent, 4-(1-pyrene)butanoic acid hydrazide (PBH). Dicarboxylic acids in urine were converted to the corresponding dipyrene-labeled derivatives by reaction with PBH in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and pyridine, and the derivatives afforded intramolecular excimer fluorescence (420-540 nm) which can clearly be discriminated from the normal fluorescence (360-420 nm) emitted from reagent blanks. The technique is so selective that it permits spectrofluorometric measurement of total amount of dicarboxylic acids by the direct derivatization of diluted urine samples. The same reaction mixture has also served as a liquid chromatographic (LC) sample for the separative determination of individual dicarboxylic acids. The spectrofluorometric data did not contradict with the LC data. These methods were usefully applied to preliminary screening test of glutaric aciduria. In conclusion, the present derivatization method allows rapid and direct determination of total amount of dicarboxylic acids in human urine samples.     

Release from or through a wax matrix system. IV. Generalized expression of the release process for a reservoir device tablet

Generalization of the release process through the wax matrix layer was examined by use of a reservoir device tablet. The wax matrix layer of the reservoir device tablet was prepared from a physical mixture of lactose and hydrogenated castor oil to simplify the release properties. Release through the wax matrix layer showed zero-order kinetics in a steady state after a given lag time, and could be divided into two stages. The first stage was the formation process of water channel by dissolving the soluble component in the wax matrix layer. The lag time obtained by applying the square root law equation was well connected with the amount of the matrix layer and mixed weight ratio of components in this layer. The second stage was the zero-order release process of drug in the reservoir through the wax matrix layer, because the effective surface area was fixed. The release rate constants were connected with thickness of the matrix layer and permeability coefficient, and the permeability coefficients were connected with the diffusion coefficient of drug and porosity. Hence the release rate constant could be connected with the amount of matrix layer and the mixed weight ratio of components in the matrix layer. It was therefore suggested that the release process could be generalized using the amount of matrix layer and the mixed weight ratio of components in the matrix layer.     

Rapid analysis of intact phospholipids from whole bacterial cells by matrix-assisted laser desorption/ionization mass spectrometry combined with on-probe sample pretreatment

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), utilizing an on-probe sample pretreatment, was applied to the rapid and direct detection of intact phospholipids from whole bacterial cells. The sample preparation procedure involved depositing growing bacterial colonies from culture dishes directly onto the MALDI probe followed by treatment of the sample spot with a 3 micro L aliquot of an aqueous 0.05 M solution of sodium iodide prior to the addition of a 2,5-dihydroxybenzoic acid (DHB) matrix solution (ca. 8 mg dissolved in 70% acetonitrile/30% H(2)O containing 0.1% of trifluoroacetic acid). The MALDI spectra obtained from whole bacteria cells showed a series of ions generated from bacterial phospholipids, such as phosphatidylethanol-amines (PEs) and phosphatidylglycerols (PGs), which were clearly observed as well-resolved peaks. The ranges of the observed total carbon numbers in two acyl groups for PEs and PGs (30-36 and 33-36, respectively) were in good agreement with those reported previously. Furthermore, the distinct discrimination of four species of the Enterobacteriaceae family cultured identically was achieved by using principal components analysis (PCA) conducted on the relative peak intensities of phospholipids observed from the MALDI spectra.     

Assembly of Carbohydrates on a Nickel(II) Center by Utilizing N-Glycosidic Bond Formation with Tris(2-aminoethyl)amine (tren). Syntheses and Characterization of [Ni{N-(aldosyl)-tren}(H(2)O)](2+), [Ni{N,N'-bis(aldosyl)-tren}](2+) and [Ni{N,N',N"-tris(aldosyl)-tren}](2+)

Reactions of [Ni(tren)(H(2)O)(2)]X(2) (tren = tris(2-aminoethyl)amine; X = Cl (1a), Br (1b); X(2) = SO(4) (1c)) with mannose-type aldoses, having a 2,3-cis configuration (D-mannose and L-rhamnose), afforded {bis(N-aldosyl-2-aminoethyl)(2-aminoethyl)amine}nickel(II) complexes, [Ni(N,N'-(aldosyl)(2)-tren)]X(2) (aldosyl = D-mannosyl, X = Cl (2a), Br (2b), X(2) = SO(4) (2c); aldosyl = L-rhamnosyl, X(2) = SO(4) (3c)). The structure of 1c was confirmed by X-ray crystallography to be a mononuclear [Ni(II)N(4)O(2)] complex with the tren acting as a tetradentate ligand (1c.2H(2)O: orthorhombic, Pbca, a = 15.988(2) ?, b = 18.826(4) ?, c = 10.359(4) ?, V = 3118 ?(3), Z = 8, R = 0.047, and R(w) = 0.042). Complexes 2a,c and 3c were characterized by X-ray analyses to have a mononuclear octahedral Ni(II) structure ligated by a hexadentate N-glycoside ligand, bis(N-aldosyl-2-aminoethyl)(2-aminoethyl)amine (2a.CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 16.005(3) ?, b = 20.095(4) ?, c = 8.361(1) ?, V = 2689 ?(3), Z = 4, R = 0.040, and R(w) = 0.027. 2c.3CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 14.93(2) ?, b = 21.823(8) ?, c = 9.746(2) ?, V = 3176 ?(3), Z = 4, R = 0.075, and R(w) = 0.080. 3c.3CH(3)OH: orthorhombic, P2(1)2(1)2(1), a = 14.560(4) ?, b = 21.694(5) ?, c = 9.786(2) ?, V = 3091 ?(3), Z = 4, R = 0.072, and R(w) = 0.079). The sugar part of the complex involves novel intramolecular sugar-sugar hydrogen bondings around the metal center. The similar reaction with D-glucose, D-glucosamine, and D-galactosamine, having a 2,3-trans configuration, resulted in the formation of a mono(sugar) complex, [Ni(N-(aldosyl)-tren)(H(2)O)(2)]Cl(2) (aldosyl = D-glucosyl (4b), 2-amino-2-deoxy-D-glucosyl (5a), and 2-amino-2-deoxy-D-galactosyl (5b)), instead of a bis(sugar) complex. The hydrogen bondings between the sugar moieties as observed in 2 and 3 should be responsible for the assembly of two sugar molecules on the metal center. Reactions of tris(N-aldosyl-2-aminoethyl)amine with nickel(II) salts gave the tris(sugar) complexes, [Ni(N,N',N"-(aldosyl)(3)-tren)]X(2) (aldosyl = D-mannosyl, X = Cl (6a), Br (6b); L-rhamnosyl, X = Cl (7a), Br (7b); D-glucosyl, X = Cl (9); maltosyl, X = Br (10); and melibiosyl, X = Br (11)), which were assumed to have a shuttle-type C(3) symmetrical structure with Delta helical configuration for D-type aldoses on the basis of circular dichroism and (13)C NMR spectra. When tris(N-rhamnosyl)-tren was reacted with NiSO(4).6H(2)O at low temperature, a labile neutral complex, [Ni(N,N',N"-(L-rhamnosyl)(3)-tren)(SO(4))] (8), was successfully isolated and characterized by X-ray crystallography, in which three sugar moieties are anchored only at the N atom of the C-1 position (8.3CH(3)OH.H(2)O: orthorhombic, P2(1)2(1)2(1), a = 16.035(4) ?, b = 16.670(7) ?, c = 15.38(1) ?, V = 4111 ?(3), Z = 4, R = 0.084, and R(w) = 0.068). Complex 8 could be regarded as an intermediate species toward the C(3) symmetrical tris(sugar) complexes 7, and in fact, it was readily transformed to 7b by an action of BaBr(2).     

Polyoxymethylene prepared by γ-ray-induced polymerization of tetraoxymethylene single crystal

Summary In order to prepare a large single crystal, tetraoxymethylene recrystallized by distilled water adjusted to pH 8 was sealed in an ampoule at a reduced pressure of 1 mm Hg and was crystallized in a furnace with the temperature gradient of 6 °C/cm. The lowering rate of the ampoule was required to be 6 cm/day for preparing the single crystal with 1 cm diameter and to be 3 cm/day for one with 2 cm diameter. The optimum angle at the pointing end of the ampoule, where a seed crystal is formed, was about 40°. The b-axis of the obtained single crystal was parallel to the direction of the crystal growth i. e. the wall of the ampoule. It was polymerized byγ-ray under conditions which prevent the growth of the twin crystal. The obtained polyoxymethylene was porous, because the polymerization yield of 100% could not be attained. However, it was so tough that a specimen for measurements could be cut down by a diamond cutter. Its fiber axis was parallel to the direction of the wall of the ampoule. It did not contain the so-called amorphous regions, although it did contain defects. It was characterized with the extremely high orientation of the polymer chains.

---

Zusammenfassung Zur Pr?parierung gro?er Einkristalle wurde rekristallisiertes Tetraoxymethylen in destilliertem Wasser von p_H 8 in eine Ampulle bei einem reduzierten Quecksilberdruck von 1 mm eingefüllt und in einem Ofen mit einem Temperaturgradienten von 6 °C/cm kristallisiert. Die Abkühlgeschwindigkeit der Ampulle betrug etwa 6 cm/Tag für die Pr?paration eines Einkristalls mit 1 cm ? und 3 cm/Tag für einen solchen mit 2 cm ?. Der optimale Winkel am spitzen Ende der Ampulle, wo der Keimkristall gebildet wird, betrug etwa 40°. Dieb-Achse des Einkristalls war parallel zur Wachstumsrichtung, d. h. zur Wand der Ampulle. Der Kristall wurde durch R?ntgenstrahlen polymerisiert unter Bedingungen, die das Wachsen eines Zwillingskristalls vermeiden. Das erhaltene Polyoxymethylen war por?s, doch konnte eine Polymerisationsausbeute von 100% nicht erhalten werden. Doch war der Einkristall so z?h, da? für Messungen eine Probe mit dem Diamantschneider abgeschnitten werden konnte. Die Faserachse war parallel zur Wandrichtung der Ampulle. Das kristalline Material enthielt keine sogenannten amorphen Bereiche, allerdings Defekte. Es war durch extrem hohe Orientierungen der Polymerketten charakterisiert.

---

---

We are greatly indebted to Dr.Y. Miyake of Mitsui Toatsu Co., Ltd. for providing the tetraoxymethylene. Thanks are to due Dr.M. Nishii of Osaka Laboratories, Japan Association for Radiation Research on Polymer for the radiation polymerization, to Mr.T. Tsukihara for the X-ray measurement, and to Mrs.H. Tanaka for the help with the electron microscopy. We are also grateful to Prof.S. Seki for offering the use of differential scanning calorimeter.