Synthesis and Characterizations of Regioregular Poly(3‐alkylthiophene) with Alter1483ting Dodecyl/1H,1H,2H,2H‐Perfluorooctyl Side Chains

A regioregular poly[4′‐dodecyl‐3‐(1H,1H,2H,2H‐perfluorooctyl)‐2,2′‐bithiophene] (P3DDFT) with alternating alkyl and semifluoroalkyl side chains were synthesized. Short ethylene spacer between perfluorohexyl part and thiophene did not largely affect the absorption and emission properties of the polythiophene backbone in comparison with poly(3‐dodecylthiophene) (P3DDT). P3DDFT showed a larger onset of the oxidation potential (+0.17 V) observed by cyclic voltamogram due to the electron withdrawing effect of the fluoroalkyl part. Thermal analysis and X‐ray diffraction patterns indicated that P3DDFT in the solid state forms a semicrystalline lamellar structure that is similar to that of P3DDT. Ultraviolet photoemission spectroscopy was also used to investigate their electron structure in the films. Comparison of hole mobilities in the films suggested that P3DDFT could have a less ordered packing structure compared to P3DDT both in the bulk and at the dielectric interface.

     

Visible light-induced degradation of ethylene glycol on nitrogen-doped TiO2 powders

The photocatalytic degradation processes of ethylene glycol (EG) during the UV or visible light irradiation of pure anatase and nitrogen (N)-doped TiO2 powders (TiO(2-x)N(x), x = 0, 0.002, 0.003, and 0.007) were investigated using time-resolved diffuse reflectance (TDR) and solid-state NMR spectroscopies. The TDR spectra and time traces observed for the charge carriers indicated that the scavenging of photogenerated holes (h+) by EG occurred during the 355-nm laser photolysis of the N-doped TiO2 powders, while no direct oxidation reaction of EG by h+ occurred during the 460-nm laser photolysis, although the charge carriers were sufficiently generated upon excitation. The solid-state magic-angle spinning (MAS) NMR measurements revealed that EG is preferentially chemisorbed on the surface of the N-doped TiO2 powders, in contrast to the pure TiO2, and degrades under visible light irradiation.     

Storage and retrieval of a squeezed vacuum

Storage and retrieval of a squeezed vacuum was successfully demonstrated using electromagnetically induced transparency. The squeezed vacuum pulse having a temporal width of 930 ns was incident on the laser cooled 87Rb atoms with an intense control light in a coherent state. When the squeezed vacuum pulse was slowed and spatially compressed in the cold atoms, the control light was switched off. After 3 mus of storage, the control light was switched on again, and the squeezed vacuum was retrieved, as was confirmed using the time-domain homodyne method.     

Highly sensitive restriction enzyme assay and analysis: a review

Biological assays at the single molecule level are crucial to fundamental studies of DNA-protein mechanisms. In order to cater for high throughput applications, one area of immense research potential is single-molecule bioassays where miniaturized devices are developed to perform rapid and effective biological reactions and analyses. With the success of various emerging technologies for engineering miniaturized structures down to the nanoscale level, supported by specialized equipment for detection, many investigations in the field of life science that were once thought impossible can now be actively explored. In this review, the significance of downscaling to the single-molecule level is firstly presented in selected examples, with the focus placed on restriction enzyme assays. To determine the effectiveness of single-molecule restriction enzyme reactions, simple and direct analytical methods based on DNA stretching have often been reliably employed. DNA stretching can be realized based on a number of working principles related to the physical forces exerted on the DNA samples. We then discuss two examples of a nanochannel system and a microchamber system where single-molecule restriction enzyme digestion and DNA stretching have been integrated, which possess prospective capabilities of developing into highly sensitive and high-throughput restriction enzyme assays. Finally, we take a brief look at the general trends in technological development in this field by comparing the advantages and disadvantages of performing assays at bulk, microscale and single-molecule levels. Figure Minaturization of Restriction Enzyme Assays and DNA Stretching     

Freeze-thaw behaviour of aqueous glucose solutions--the crystallisation of cubic ice

We report on the polymorphic transitions of ice in aqueous solutions of glucose during freezing and thawing over a temperature range of 298-153 K. Emphasis is placed on the sub-glass temperature range where the systems consist of cubic ice (ice-1c) crystals embedded in a freeze concentrated, vitrified glucose solution. The systems were studied by a combination of thermal, cryomicroscopic and X-ray diffraction techniques. At the glass transition (230 K) the solution phase contained 80 mol% of unfrozen water which, on further cooling, was shown to crystallise as cubic ice (ice-1c), nucleated in the vitrified matrix. The thermal stability of the ice-1c formed was studied by annealing and isothermal changes in the diffraction patterns with time. The polymorphic transition 1c --> 1h could be fitted to first order kinetics. Contrary to currently held belief, this study has provided evidence that ice-1c can be formed directly in the bulk water phase of a vitrified solution.     

The pH effect on the naphthoquinone-photosensitized oxidation of 5-methylcytosine

The pH effect on the one-electron photooxidation of 5-methyl-2'-deoxycytidine (d(m)C) by sensitization with 2-methyl-1,4-naphthoquinone (NQ) was investigated. Photoirradiation of an aqueous solution containing d(m)C and NQ under slightly acidic conditions of pH 5.0 efficiently produced 5-formyl-2'-deoxycytidine, whereas similar NQ-photosensitized oxidation of d(m)C proceeded to a lesser extent under more acidic or basic conditions. Fluorescence-quenching experiments revealed that the less-efficient photooxidation at pH values below 4.5 is attributed to the decreased rate of one-electron oxidation of d(m)C owing to protonation at the N(3)-position. The NQ-photosensitized oxidation of an N(4)-dimethyl-substituted d(m)C derivative under various pH conditions also suggests that the pH change in the range of 5.0 to 8.0 may be responsible for a reversible deprotonation-protonation equilibrium at the N(4)-exocyclic amino group of the d(m)C radical cation. In accord with the photochemical reactivity of monomeric d(m)C, the 5-methylcytosine residue in oligodeoxynucleotides was oxidized efficiently by photoexcited NQ-tethered oligodeoxynucleotides under slightly acidic conditions to form an alkali-labile 5-formylcytosine residue.     

Nonlinear magneto-optical effects and photomagnetism of electrochemically synthesized molecule-based magnets

This article describes novel optical functionalities such as photomagnetic effects and magnetization-induced second harmonic generation (MSHG) in several cyano-bridged metal assemblies. Single crystal- and film-types of a cyano-bridged Cu–Mo bimetallic assembly, , were electrochemically prepared. When this compound was irradiated with light, spontaneous magnetization with a Curie temperature (T _C) of 23 K was observed. Electrochemically prepared Fe^II[Cr^III(CN)₆]_2/3·5H₂O thin film, which was a ferromagnet with T _C=21 K, showed photoreduced magnetization. This photomagnetism is due to the change of ferromagnetic coupling between Fe^II and Cr^III. MSHG was observed in Cs^ICo^II[Cr^III(CN)₆]·0.5H₂O. This -type Prussian blue analog-based magnet is proven to be a piezoelectric ferromagnet, i.e., condensed matter with both piezoelectric and ferromagnetism. This MSHG is due to the coupling between a piezoelectric structure of and ferromagnetism with a T _C of 46 K.

Immobilized triazine-type dehydrocondensing reagents for carboxamide formation: ROMP-Trz-Cl and ROMP(OH)-Trz-Cl

New triazine-type dehydrocondensing reagents, such as ROMP-Trz-Cl and ROMP(OH)-Trz-Cl, were synthesized by a ring opening metathesis polymerization (ROMP) method, and these showed higher loading than conventional polymer-supported condensing reagents. These polymers effect the formation of amides in good yields by addition of a mixture of carboxylic acid, amine and NMM. ROMP(OH)-Trz-Cl, which contains hydroxyl groups in the polymer chain, gave amides in good yields even in MeOH.     

A chiral chelating diene as a new type of chiral ligand for transition metal catalysts: its preparation and use for the rhodium-catalyzed asymmetric 1,4-addition

As a new type of chiral ligand, a C2-symmetric norbornadiene derivative (1R,4R)-2,5-dibenzylbicyclo[2.2.1]hepta-2,5-diene (1) was prepared and used for the rhodium-catalyzed asymmetric addition of organoboron and -tin reagents to alpha,beta-unsaturated ketones, which gave high yields of the 1,4-addition products with up to 99% enantioselectivity.     

Interfacial modification of organic photovoltaic devices by molecular self-organization

This feature article focuses on the relationship between the interfacial structures constructed by molecular self-organization and the properties of organic photovoltaic devices. The use of self-assembled monolayers (SAMs) is reviewed for metal and metal oxide/organic interfaces, while surface-segregated monolayers (SSMs) are introduced as a new method for the modification of organic/organic interfaces. Research up to now has clearly demonstrated the effectiveness of the control of energy levels and other properties at the interfaces to enhance photovoltaic performance. The possibility of more precise control of the interfacial structures is also discussed.