Self-Restoration Properties of VWP Networks by Spare Wavelength Optimization

The self-restoration properties in VWP networks are investigated with optimization about spare wavelength by simulations. Rapid restoration can be achieved by selection of rerouting path with long delay and no delay-limitation for new routes.     

Investigation of the relationship between the ionic conductivity and the local structures of singly and doubly doped ceria compounds using EXAFS measurement

The oxide ionic conductivity measurements of singly and doubly doped ceria compounds were carried out. Singly and doubly doped ceria used in this study were Ce_0.8Ln_0.2O_1.9 (Ln=Y, Sm, Nd, or La) and Ce_0.8La_0.1Y_0.1O_1.9, respectively. Lattice constants of these compounds were in proportion to the ionic radius of the dopant(s). The doubly doped ceria compound showed oxide ionic conductivity comparative to the average of that of each corresponding singly doped sample. This finding indicates that the conductivity is influenced by both dopants in the doubly doped compounds. The extended X-ray absorption fine structure (EXAFS) study showed that the coordination number of oxide ions at the nearest neighbor of cation was related to the ionic conductivity. It was found that the conductivity gave the highest value when oxygen vacancies were randomly distributed in the lattice. This indicates that the local structure seriously affects oxide ionic conduction in singly and doubly doped ceria compounds.     

In-situ X-ray diffraction study on β-CrOOH at high pressure and high-temperature

ABSTRACT

High pressure hydrous phases with distorted rutile-type structure have attracted much interest as potential water reservoirs in the Earth’s mantle. An in-situ X-ray diffraction study of β-CrOOH was performed at high pressures of up to 6.2?GPa and high-temperatures of up to 700?K in order to clarify the temperature effect on compression behaviors of β-CrOOH. The P-V-T data fitted to a Birch–Murnaghan equation of state yielded the following results: isothermal bulk modulus K_T0?=?191(4)?GPa, temperature derivative (?K_T/?T)_P?=??0.04(2)?GPa?K^?1, and volumetric thermal expansion coefficient α?=?3.3(2)?×?10^?5?K^?1. In this study, at 300?K, the a-axis became less compressible at pressures above 1–2?GPa. We found that the pressure where the slopes of a/b and a/c ratios turned positive increased with temperature. This is the first experimental study indicating the temperature dependence of the change in the axial compressibility in distorted rutile-type M³⁺OOH.     

ACE algorithm for the rapid evaluation of the electron-repulsion integral over Gaussian-type orbitals

A new series of general formulas to evaluate the electron-repulsion integral (ERI) can be derived from modifying the Gauss-Rys quadrature formula. These named as “accompanying coordinate expansion (ACE) formulas” are capable of evaluating very fast ERIs, especially for contracted Gaussian-type orbitals (GTOs). According to the degree of the contraction of GTOs, the optimum formula can be selected among these ACEs. Numerical examples are shown for (ps|ps) and (pp|pp) ERIs as typical examples. It is found that the present ACE algorithm is numerically stable and is most efficient among all algorithms in the literature in the floating-point-operation (FLOP) count for all varieties of the degree of contraction. © 1996 John Wiley & Sons, Inc.     

Sorption and pervaporation properties of crosslinked membranes of poly(ethylene oxide imide) segmented copolymer to aromatic/nonaromatic hydrocarbon mixtures

Poly(ethylene oxide imide) segmented copolymer (PEO‐PI) membranes were crosslinked by the chemical reaction between ethylene glycol diglycidyl ether and benzylalcohol groups of diamine moieties in polyimide segments at high temperatures. Sorption and diffusion of penetrants took place in poly(ethylene oxide) segment microdomains. Sorption and desorption behavior of pure vapors such as benzene (Bz), cyclohexane (Cx) and n‐hexane (Hx) was classified as the Fickian diffusion. Sorption isotherms of binary liquid mixtures could be represented by the Flory–Rehner model, but the model overpredicted the sorption amounts of Cx and Hx, leading to small predictions of sorption selectivity α_S for Bz/Cx and Bz/Hx systems. UNIFAC‐FV model fairly well predicted the sorption amounts of aromatic hydrocarbons, but significantly overestimated those of nonaromatic ones, leading to too small predictions of α_S. Pervaporation (PV) behavior of PEO‐PI membranes was governed by sorption behavior followed by membrane swelling. Diffusion coefficient weakly depended on the minimum cross section of a penetrant. The diffusivity selectivity α_D hardly depended on the feed composition and was about 1.4 and 0.75 for Bz/Cx and Bz/Hx, respectively. PV selectivity α_PV was larger for Bz/Hx than for Bz/Cx because of larger α_S. PEO‐PI membranes displayed high specific permeation flux Ql and reasonably high α_PV for aromatic/nonaromatic hydrocarbons; for example, Ql = 60 Kg μm/(m² h) and α_PV = 8 for a feed mixture containing Bz, Tol, Hx, n‐Ot and i‐Ot of 20 wt % at 353 K. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1800–1811, 2000     

Synthesis and evaluation of fluorogenic reagents for simultaneous detection of peptides and proteins by HPLC in two different samples

To find the pairs of fluorogenic reagents having similar retention times in HPLC but with different fluorescent characteristics, six fluorogenic reagents bearing benzoxadiazole or benzoselenadiazole skeletons were synthesized. The resultant derivatives obtained from the reaction of peptides and proteins with reagents which have a benzoselenadiazole skeleton showed different fluorescence characteristics from those with a benzoxadiazole skeleton. Since each corresponding derivatives of trypsin inhibitor and BSA with DAABD-Cl and 7-fluoro-N-[2-(diethylamino)ethyl]-2,1,3-benzoselenadiazole-4-sulfonamide (DEAEABSeD-F) have similar retention times, the pair of reagents was adopted for the sensitive simultaneous detection of proteins in two different samples. When the soluble fraction of mouse hippocampus was divided into the two samples (A and B), each was reacted with DEAEABSeD-F for A and DAABD-Cl for B, respectively. The two reaction solutions were combined and subjected to HPLC analysis with two fluorescent detectors in series (excitation and emission at different wavelengths for A and B, respectively). The resultant two chromatograms had quite similar patterns for each other. The new pair of fluorogenic reagents (DAABD-Cl and DEAEABSeD-F) would be applicable to proteomics studies using the previously reported FD-LC-MS/MS method.     

Construction of carbocyclic ring of indoles using ruthenium-catalyzed ring-closing olefin metathesis

The selective synthesis of substituted indoles was achieved by the ring-closing olefin metathesis (RCM)/elimination sequence or the RCM/tautomerization sequence of functionalized pyrrole precursors. The RCM/elimination sequence was also applied to double ring closure to yield a substituted carbazole.     

Synthesis and nanoimprinting of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry

This work demonstrates the UV nanoimprinting lithography (UV-NIL) of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry. Herein, 9,9-bis(3-mercaptopropylphenylether)fluorene (BMPF) is designed as a new thiol monomer with a high refractive index, high transparency, and good processability for UV-NIL. Colorless polythioethers are synthesized from BMPF and ene monomers under mild thiol-ene click reaction conditions. Excellent transmittance (96%) of 400 nm light is observed in all the polymer films and high refractive index values of 1.5972–1.6382 are attained. UV-NIL using thiol-ene photopolymerization affords polymer nanoimprinting patterns with various features on the order of 100–500 nm without any fractures. To the best of our knowledge, this is the first report on UV-NIL of high refractive index and highly transparent polymers. Through proper monomer and polymer design, novel polythioethers with suitable glass transition temperature (T _g) values are developed with high refractive index, high transparency, and good UV-NIL processability. Furthermore, UV-NIL based on thiol-ene click chemistry is accomplished at the nanoscale. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2175–2182     

Novel indoline dye tetrabutylammonium carboxylates attached with a methyl group on the cyclopentane ring for dye-sensitized solar cells

(2R,3aR,8bR)- and (2S,3aS,8bS)-2-Methyl indoline dye tetrabutylammonium carboxylates exhibited the highest conversion efficiency among four regio and stereo isomers. These indoline dyes also showed higher conversion efficiency than DN350.