Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Analysis of a meshless solver for high Reynolds number flow

In this paper, the extension of an upwind least‐square based meshless solver to high Reynolds number flow is explored, and the properties of the meshless solver are analyzed both theoretically and numerically. Existing works have verified the meshless solver mostly with inviscid flows and low Reynolds number flows, and in this work, we are interested in the behavior of the meshless solver for high Reynolds number flow, especially in the near‐wall region. With both theoretical and numerical analysis, the effects of two parameters on the meshless solver are identified. The first one is the misalignment effect caused by the significantly skewed supporting points, and it is found that the meshless solver still yields accurate prediction. It is a very interesting property and is opposite to the median‐dual control volume based vertex‐centered finite volume method, which is known to give degraded result with stretched triangular/tetrahedral cells in the near‐wall region. The second parameter is the curvature, and according to theoretical analysis, it is found in the region with both large aspect ratio and curvature, and the streamwise residual is less affected; however, the wall‐normal counterpart suffers from accuracy degradation. In this paper, an improved method that uses a meshless solver for the streamwise residual and finite difference for wall‐normal residual is developed. This method is proved to be less sensitive to the curvature and provides improved accuracy. This work presents an understanding of the meshless solver for high Reynolds number flow computation, and the analysis in this paper is verified with a series of numerical experiments. Copyright © 2012 John Wiley & Sons, Ltd.     

Intra-abdominal fat area is a predictor for new onset of individual components of metabolic syndrome: MEtabolic syndRome and abdominaL ObesiTy (MERLOT study)

Objective: To investigate the significance of intra-abdominal fat area (IAFA) on new onset of individual components of the metabolic syndrome: high blood pressure, dyslipidemia, or hyperglycemia. Methods: We conducted a longitudinal study using checkup data of a hospital from 1994 to 2010. Of 25,255 subjects, we examined 1,380 Japanese, who underwent computed tomography to measure IAFA and had no metabolic syndrome components at baseline. Results: During 3.6 years of the mean follow-up period, one of metabolic syndrome components occurred in 752 subjects. Of three components, high blood pressure was more prevalent. The multiple Cox regression analysis disclosed that IAFA is significantly associated with onset of metabolic syndrome components (HR: 1.05 per 10 cm², 95%CI: 1.03–1.07). This finding was independent of BMI, and significant even in non-obese individuals with body mass index <25 kg/m². Conclusions: MERLOT study demonstrates that IAFA is an independent predictor for new onset of individual components of the metabolic syndrome, even in non-obese healthy Japanese.     

Total synthesis of pleurolactone

The stereoselective total synthesis of pleurolactone has been accomplished in 7 steps. The key synthetic features were the construction of four contiguous stereocenters using an endo-selective Diels-Alder reaction and high diastereoselective dihydroxylation.     

Proton Order–Disorder Phenomena in a Hydrogen‐Bonded Rhodium–η5‐Semiquinone Complex: A Possible Dielectric Response Mechanism

A newly synthesized one‐dimensional (1D) hydrogen‐bonded (H‐bonded) rhodium(II)–η⁵‐semiquinone complex, [Cp*Rh(η⁵‐p‐HSQ‐Me₄)]PF₆ ([ 1 ]PF₆; Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl; HSQ=semiquinone) exhibits a paraelectric–antiferroelectric second‐order phase transition at 237.1 K. Neutron and X‐ray crystal structure analyses reveal that the H‐bonded proton is disordered over two sites in the room‐temperature (RT) phase. The phase transition would arise from this proton disorder together with rotation or libration of the Cp* ring and PF₆^? ion. The relative permittivity ε_b′ along the H‐bonded chains reaches relatively high values (ca., 130) in the RT phase. The temperature dependence of ¹³C CP/MAS NMR spectra demonstrates that the proton is dynamically disordered in the RT phase and that the proton exchange has already occurred in the low‐temperature (LT) phase. Rate constants for the proton exchange are estimated to be 10^?4–10^?6 s in the temperature range of 240–270 K. DFT calculations predict that the protonation/deprotonation of [ 1 ]⁺ leads to interesting hapticity changes of the semiquinone ligand accompanied by reduction/oxidation by the π‐bonded rhodium fragment, producing the stable η⁶‐hydroquinone complex, [Cp*Rh³⁺(η⁶‐p‐H₂Q‐Me₄)]²⁺ ([ 2 ]²⁺), and η⁴‐benzoquinone complex, [Cp*Rh⁺(η⁴‐p‐BQ‐Me₄)] ([ 3 ]), respectively. Possible mechanisms leading to the dielectric response are discussed on the basis of the migration of the protonic solitons comprising of [ 2 ]²⁺ and [ 3 ], which would be generated in the H‐bonded chain.     

Polymerization-induced self-assembly of amino-acid-based nano-objects by reversible addition–fragmentation chain-transfer dispersion polymerization

A series of amino-acid-based amphiphilic diblock copolymer nano-objects having different morphologies were developed by reversible addition–fragmentation chain-transfer (RAFT) dispersion polymerization of styrene (St) in methanol. This was mediated by six different hydrophilic poly(N-acryloyl amino acid) macro-chain transfer agents (CTAs), including three carboxylic-acid-containing ones, poly(N-acryloyl-l -proline) (PAProOH), poly(N-acryloyl-4-trans-hydroxy-l -proline) (PAHypOH), and poly(N-acryloyl-l -threonine) (PAThrOH) prepared by RAFT polymerization, and their methyl ester forms, PAProOMe, PAHypOMe, and PAThrOMe. The effects of polymerization conditions on RAFT dispersion polymerization of St using a dithiocarbamate-terminated PAProOH was investigated. A systematic study of the effects of monomer conversion and concentration afforded the formation of various morphologies (i.e., spheres, worms, and vesicles). The effects of hydrogen-bonding and ionic interactions of the macro-CTAs on the assembled structures of the nano-objects were evaluated using six different macro-CTAs. Transforming the products from methanol to water via dialysis produced amino-acid-based block copolymer nano-objects, exhibiting pH-responsive morphological change, in aqueous solution.     

High-Performance Liquid Chromatographic Characterization of the Role of Inorganic Pyrophosphatase in Regulating the Reaction of Uridine 5′-Triphosphate with Glucose 1-Monophosphate

Abstract

Inorganic pyrophosphatase (EC 3. 6. 1. 1) drived the reaction of uridine 5′-triphosphate with glucose 1-monophosphate in the direction of uridine 5′-diphosphoglucose formation.     

Vinyl Polymerization. 418. Polymerization of Vinyl Monomer Initiated by Betaine-Type Polymers in Aqueous Solution

Abstract

Three kinds of betaine-type polymers, which are macromolecular amphoteric electrolytes, were found to be able to polymerize vinyl monomers in aqueous solution through a radical mechanism without any further initiator. Betain-type polymers form hydrophobic areas (HA) in water. Vinyl polymerization commenced in the HA. The effect of the pH of the aqueous solution on polymerization was investigated.