Positron annihilation properties of copolyimides and copolyamides with microphase‐separated structures

The positron annihilation lifetime (PAL) of a series of copolyimides and copolyamides with microphase‐separated structures was measured to investigate the effects of different hard‐segment polymers on the PAL properties of soft‐segment domains of poly(dimethyl‐siloxane) (PDMS) and poly(ethylene oxide) (PEO). The lifetime (τ₃) and intensity (I₃) of the long‐lived component are given as a function of the PDMS or PEO content for a series of copolymers, of which the density roughly obeys the additive rule except for the PDMS‐segmented copolyamides. The PDMS‐segmented copolyimides and copolyamides show much smaller I₃ values than those estimated from the additive rule. The lifetime distribution of the long‐lived component for the PDMS‐segmented copolyamides is composed of two components. The longer‐lifetime component is attributed to pure PDMS domains, and the shorter‐lifetime component is attributed to the polyamide domains, intermediate phases, and PDMS domains containing small amounts of short amide blocks. Despite the high PDMS content, the latter component is rather large. Thus, the positronium formation in the PDMS domains of the copolyimides and copolyamides is effectively reduced. This can be explained by the combination of the difference in the electron affinity of the PDMS and polyimide or polyamide segments and the incomplete phase separation. The PEO‐segmented copolyimides show much smaller I₃ values than those predicted from the additive rule. This is likely attributable to the effects of the intermediate phases. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1123–1132, 2000     

Pd(II)-SPRIX catalyzed enantioselective construction of pyrrolizines/pyrroloindoles employing molecular oxygen as the sole oxidant

Pd(II)-SPRIX catalyst coupled with an environmentally benign molecular oxygen as the sole oxidant successfully exploited the construction of pyrrolizines/pyrroloindoles, imperative scaffolds of bio-potent molecules through intramolecular C-N and C-C bond forming reactions in good yields with appreciable enantioselectivities.     

A Permselective CeOx Coating To Improve the Stability of Oxygen Evolution Electrocatalysts

Highly active NiFeO_x electrocatalysts for the oxygen evolution reaction (OER) suffer gradual deactivation with time owing to the loss of Fe species from the active sites into solution during catalysis. The anodic deposition of a CeO_x layer prevents the loss of such Fe species from the OER catalysts, achieving a highly stable performance. The CeO_x layer does not affect the OER activity of the catalyst underneath but exhibits unique permselectivity, allowing the permeation of OH^? and O₂ through while preventing the diffusion of redox ions through the layer to function as a selective O₂‐evolving electrode. The use of such a permselective protective layer provides a new strategy for improving the durability of electrocatalysts.     

Photocatalytic oxidation of 2-propanol under visible light irradiation on TiO<Subscript>2</Subscript> thin films prepared by an RF magnetron sputtering deposition method

Visible light-responsive TiO₂ (Vis-TiO₂) thin films able to absorb UV and visible light in wavelength regions of 250–600 nm were successfully developed by applying a radio-frequency magnetron sputtering deposition method. These Vis-TiO₂ thin films exhibited high activity for the photocatalytic oxidation of 2-propanol diluted in water even under visible light irradiation (λ ≥ 450 nm). The photocatalytic activity of Vis-TiO₂ thin films was dramatically enhanced by the deposition of Pt particles on the surface. Secondary ion mass spectrometry measurements revealed that Pt particles are distributed from the top surface to the deep bulk of Vis-TiO₂ thin films with a columnar structure. The unique columnar structure of Vis-TiO₂ thin films plays an important role in the high photocatalytic performance.     

Solid-state ligand-driven light-induced spin change at ambient temperatures in bis(dipyrazolylstyrylpyridine)iron(II) complexes

We previously reported that an Fe(II) complex ligated by two (Z)-2,6-di(1H-pyrazol-1-yl)-4-styrylpyridine ligands (Z-H) presented a solid state ligand-driven light-induced spin change (LD-LISC) upon one-way Z-to-E photoisomerization, although modulation of the magnetism was trivial at ambient temperatures (Chem. Commun.2011, 47, 6846). Here, we report the synthesis of new derivatives of Z-H, Z-CN and Z-NO(2), in which electron-withdrawing cyano and nitro substituents are introduced at the 4-position of the styryl group to attain a more profound photomagnetism at ambient temperatures. Z-CN and Z-NO(2) undergo quantitative one-way Z-to-E photochromism upon excitation of the charge transfer band both in acetonitrile and in the solid state, similar to the behavior observed for Z-H. In solution, these substituents stabilized the low-spin (LS) states of Z-CN and Z-NO(2), and the behavior was quantitatively analyzed according to the Evans equation. The photomagnetic properties in the solid state, on the other hand, cannot be explained in terms of the substituent effect alone. Z-CN displayed photomagnetic properties almost identical to those of Z-H. Z-CN preferred the high-spin (HS) state at all temperatures tested, whereas photoirradiated Z-CN yielded a lower χ(M)T at ambient temperatures. The behavior of Z-NO(2) was counterintuitive, and the material displayed surprising photomagnetic properties in the solid state. Z-NO(2) occupied the LS state at low temperatures and underwent thermal spin crossover (SCO) with a T(1/2) of about 270 K. The photoirradiated Z-NO(2) displayed a higher value of χ(M)T and the modulation of χ(M)T exceeded that of Z-H or Z-CN. Z-NO(2)·acetone, in which acetone molecules were incorporated into the crystal lattice, further stabilized the LS state (T(1/2) > 300 K), thereby promoting large modulations of the χ(M)T values (87% at 273 K and 64% at 300 K) upon Z-to-E photoisomerization. Single crystal X-ray structure analysis revealed that structural factors played a vital role in the photomagnetic properties in the solid state. Z-H and Z-CN favored intermolecular π-π stacking among the ligand molecules. The coordination sphere around the Fe(II) nucleus was distorted, which stabilized the HS state. In contrast, Z-NO(2)·acetone was liberated from such intermolecular π-π stacking and coordination distortion, resulting in the stabilization of the LS state.     

Nitrosation of Phenolic Substrates under Mildly Basic Conditions: Selective Preparation of p-Quinone Monooximes and Their Antiviral Activities

Nitrosation of 3-methoxyphenol and 1-naphthol were examined under both acidic (NaNO(2)-EtCO(2)H-H(2)O) and basic (i-AmNO(2)-K(2)CO(3)-DMF) conditions. Acidic nitrosations afforded ortho-directed products, whereas para-directed nitrosations were observed under basic conditions to yield p-quinone monooximes. The basic para-directed nitrosation was further examined using 15 phenols, two naphthols, and four phenolic heterocyclics. A one-pot operation of the basic nitrosation followed by methylation with dimethyl sulfate gave the corresponding methyl ethers in high yield. Two p-quinone monooximes derived from 3-methoxyphenol and 8-hydroxyquinoline showed a moderate activity against HSV-1, and the latter oxime was also effective against HSV-2. On the other hand, p-quinone monooximes derived from methyl salicylate, 1-naphthol, 7-hydroxy-2-methylbenzo[b]furan, and 8-hydroxycoumarin showed the comparable activity to that of DDI against HIV-1.     

Fluorine-doped TiO2 powders prepared by spray pyrolysis and their improved photocatalytic activity for decomposition of gas-phase acetaldehyde

F-doped TiO₂ (FTO) powders were synthesized by spray pyrolysis (SP) from an aqueous solution of H₂TiF₆. The resulting FTO powders possessed spherical particles with a rough surface morphology and a strong surface acidity. The fluorine concentrations in the FTO powders calculated from XPS spectra significantly depended on SP temperature and ranged from 2.76 to 9.40 at.%. The FTO powder prepared at SP temperature of 1173 K demonstrated the highest photocatalytic activity for the decomposition of gas-phase acetaldehyde under both ultraviolet (UV) and visible light (vis) irradiations, and it was higher than that of commercial P 25. This high photocatalytic activity was ascribed to several beneficial effects produced by F-doping: enhancement of surface acidity, creation of oxygen vacancies, and increase of active sites. It was interesting to point out that the vis photocatalytic activity of FTO powders was achieved by the creation of surface oxygen vacancies rather than the improvement of optical absorption property of bulk TiO₂ in vis region.     

Efficient eosin y dye-sensitized solar cell containing Br-/Br3- electrolyte

We found that Br-/Br3- is more suitable than an I-/I3- couple in dye-sensitized solar cells in terms of higher open-circuit photovoltage (Voc) production and higher overall energy conversion efficiency (eta) if the dye sensitizer has a more positive potential than that of Br-/Br3-. Under simulated AM1.5 one sun, an eosin Y dye-sensitized solar cell containing 0.4 M LiBr + 0.04 M Br2 electrolyte in acetonitrile yielded a short-circuit photocurrent (Jsc) of 4.63 mA cm(-2), Voc of 0.813 V, and fill factor (FF) of 0.693, corresponding to 2.61% of eta. Under the same conditions except for the electrolyte 0.4 M LiI + 0.04 M I2 in acetonitrile instead, the device produced 1.67% of eta (Jsc = 5.15 mA cm(-2), Voc = 0.451 V, FF = 0.721). Replacement of I-/I3- with Br-/Br3- in eosin Y dye-sensitized solar cells yielded a significant increase in Voc offset by slight decreases in Jsc and FF, leading to an increase in eta by 56%. The significant gain in Voc was attributed to the enlarged energy level difference between the redox potential of the electrolyte and the Fermi level of TiO2 and the suppressed charge recombination as well. The rate for charge recombination between bromine and the injected electrons was determined to be first order in bromine.     

Reverse zymography using fluorogenic substrates for protease inhibitor detection

A novel, sensitive method for detecting protease inhibitors by using fluorescent protease substrates in gels is described. The protease inhibitors were separated on sodium dodecyl sulfate (SDS)-polyacrylamide gels containing a copolymerized peptide substrate, namely 4-methyl-coumaryl-7-amide (MCA). As the incorporated substrates in the gel, Boc-Phe Ser-Arg-MCA was used for trypsin, Suc-Ala-Ala-Pro-Phe-MCA for alpha-chymotrypsin, and Z-Phe-Arg-MCA for papain. After electrophoresis, washing and incubating the gel with the target protease solutions allowed the substrate to be cleaved by the protease, and the release of the fluorescent 7 amino-4 methyl-coumarin (AMC), which was detected under a UV transilluminator. The uncleaved peptide-MCA substrate remained where the inhibitors were present, and was visualized as dark blue bands on the light-green fluorescent background gel. This new method offers several advantages over other previous methods including: (i) greatly increased sensitivity can be achieved in a shorter period of time, which may be useful for discovering new protease inhibitors in small amounts of crude material; (ii) the procedure is quite simple and quick since the incubation period is very short and no time is needed for staining and destaining steps; (iii) since these probes using substrate specificity/target proteases, they are excellent tools for detection and discrimination of unknown protease inhibitors for various target proteases.     

Cholesteric induction power of β-galactose derivatives

Galactose derivatives were explored as chiral dopants, effective for inducing chiral nematic liquid crystal (LC) phases. Galactose bearing O-isopropylidene substituents at the C3 and C4 and butoxybiphenyl substituents at the C2 and C6 positions exhibits a high helical twisting power (HTP) value of ?74.4 μm^?1. Such a high HTP value for the galactose derivative is attributed to (1) linkage of the C3 and C4 carbons with the O-isopropylidene substituent, which places the C2 and C6 substitutes in a skew arrangement at a large angle and (2) enhancement of the affinity with the host nematic LCs by incorporating aromatic substituents at the C2 and C6 positions that are similar to those in the host.