Sorption and pervaporation properties of crosslinked membranes of poly(ethylene oxide imide) segmented copolymer to aromatic/nonaromatic hydrocarbon mixtures

Poly(ethylene oxide imide) segmented copolymer (PEO‐PI) membranes were crosslinked by the chemical reaction between ethylene glycol diglycidyl ether and benzylalcohol groups of diamine moieties in polyimide segments at high temperatures. Sorption and diffusion of penetrants took place in poly(ethylene oxide) segment microdomains. Sorption and desorption behavior of pure vapors such as benzene (Bz), cyclohexane (Cx) and n‐hexane (Hx) was classified as the Fickian diffusion. Sorption isotherms of binary liquid mixtures could be represented by the Flory–Rehner model, but the model overpredicted the sorption amounts of Cx and Hx, leading to small predictions of sorption selectivity α_S for Bz/Cx and Bz/Hx systems. UNIFAC‐FV model fairly well predicted the sorption amounts of aromatic hydrocarbons, but significantly overestimated those of nonaromatic ones, leading to too small predictions of α_S. Pervaporation (PV) behavior of PEO‐PI membranes was governed by sorption behavior followed by membrane swelling. Diffusion coefficient weakly depended on the minimum cross section of a penetrant. The diffusivity selectivity α_D hardly depended on the feed composition and was about 1.4 and 0.75 for Bz/Cx and Bz/Hx, respectively. PV selectivity α_PV was larger for Bz/Hx than for Bz/Cx because of larger α_S. PEO‐PI membranes displayed high specific permeation flux Ql and reasonably high α_PV for aromatic/nonaromatic hydrocarbons; for example, Ql = 60 Kg μm/(m² h) and α_PV = 8 for a feed mixture containing Bz, Tol, Hx, n‐Ot and i‐Ot of 20 wt % at 353 K. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1800–1811, 2000     

Photoinduced tandem three-component coupling of propanedinitrile, 2,5-dimethylhexa-2,4-diene, and cyanoarenes

A tandem three-component coupling photoreaction proceeds upon photoirradiation of MeCN/H2O solutions containing propanedinitrile (1, malononitrile), 2,5-dimethylhexa-2,4-diene (2), and polycyanoarenes in the presence of phenanthrene and carbonate, leading to selective alpha-monoalkylation of 1. The reaction proceeds via photo-NOCAS (Nucleophile-Olefin Combination, Aromatic Substitution) type mechanism: nucleophilic attack of the anion of 1 to photogenerated 2(*+) is followed by ipso-substitution on the radical anion of the polycyanoarene. It advances under mild, safe, and environmentally friendly conditions such as proceeding at ambient temperature without metals and halogens, and in the presence of weak base. The reaction also represents a novel and metal-free cross-coupling reaction that leads to ipso-substitution on polycyanoarene via aryl-cyano bond cleavage. In addition, the reaction is a rare example of introducing carbon nucleophile in the photoinduced electron transfer reaction, except that of cyanide ion.     

Synthesis and evaluation of fluorogenic reagents for simultaneous detection of peptides and proteins by HPLC in two different samples

To find the pairs of fluorogenic reagents having similar retention times in HPLC but with different fluorescent characteristics, six fluorogenic reagents bearing benzoxadiazole or benzoselenadiazole skeletons were synthesized. The resultant derivatives obtained from the reaction of peptides and proteins with reagents which have a benzoselenadiazole skeleton showed different fluorescence characteristics from those with a benzoxadiazole skeleton. Since each corresponding derivatives of trypsin inhibitor and BSA with DAABD-Cl and 7-fluoro-N-[2-(diethylamino)ethyl]-2,1,3-benzoselenadiazole-4-sulfonamide (DEAEABSeD-F) have similar retention times, the pair of reagents was adopted for the sensitive simultaneous detection of proteins in two different samples. When the soluble fraction of mouse hippocampus was divided into the two samples (A and B), each was reacted with DEAEABSeD-F for A and DAABD-Cl for B, respectively. The two reaction solutions were combined and subjected to HPLC analysis with two fluorescent detectors in series (excitation and emission at different wavelengths for A and B, respectively). The resultant two chromatograms had quite similar patterns for each other. The new pair of fluorogenic reagents (DAABD-Cl and DEAEABSeD-F) would be applicable to proteomics studies using the previously reported FD-LC-MS/MS method.     

Construction of carbocyclic ring of indoles using ruthenium-catalyzed ring-closing olefin metathesis

The selective synthesis of substituted indoles was achieved by the ring-closing olefin metathesis (RCM)/elimination sequence or the RCM/tautomerization sequence of functionalized pyrrole precursors. The RCM/elimination sequence was also applied to double ring closure to yield a substituted carbazole.     

Ion-exchanger colorimetry-II microdetermination of chromium in natural waters

Ion-exchanger colorimetry for chromium(VI) with 1,5-diphenylcarbohydrazide has been developed for the determination of chromium at mug/l. concentrations in natural water samples. About 90% of the chromium(VI) in a 1-litre sample solution is concentrated in 200-400 mesh Dowex 50W-X4 resin within half an hour. It is possible to obtain higher sensitivity by employing a larger amount of sample solution. Total chromium can be determined by oxidizing chromium(III) to chromium(VI) with ceric sulphate.     

Solvent extraction of the ion-pairs of chromium(VI) and molybdenum(VI) with trioctylmethylammonium chloride and benzyldimethylcetylammonium chloride

The number of capriquat molecules per chromium(VI) atom in the chromate-capriquat ion-association complex has been found to be between one and two. The distribution ratio in the extraction of chromium(VI) with capriquat is dependent on the dielectric constant of the organic solvent, with a minimum at a dielectric constant of about 8. The absorption spectra of the ion-pair extracted into cyclohexane, carbon tetrachloride, benzene and n-butanol are very similar to that of chromate in aqueous solution. The absorption spectra of the chromium(VI)-capriquat extracts in these organic solvents gradually change to an absorption spectrum similar to that of HCrO(4)(-) in aqueous solution. Chromium(VI)-capriquat extracted into chloroform and 1,2-dichloroethane gives absorption spectra similar to that of HCrO(4)(-)in aqueous medium. The chromium(VI)-capriquat species extracted into 1,2-dichloroethane may be (Q(+))(2).CrO(4)(2-)(H(2)O)(n). In contrast, chromium(VI) is extracted with capriquat into the other organic solvents from ammoniacal medium as a mixture of (Q(+))(2).CrO(4)(2-)(H(2)O)(n) and Q(+).NH(4)(+).CrO(4)(2-)(H(2)O)(n). The spectral change is ascribed to the change of the extracted species from (Q(+))(2).CrO(4)(2-)(H(2)O)(n) and Q(+)NH(4)(+).CrO(4)(-)(H(2)O)(n) to Q(+).HCrO(4)(2-)(H(2)O)(n-1). The chromium(VI)-zephiramine species extracted is formulated as (Q(+), NH(4)(+))(2)CrO(4)(2-)(H(2)O)(n).(Q(+).Cl(-))(m). Molybdenum(VI) is extracted with capriquat into the same organic solvents as a mixture of (Q(+))(2).MoO(4)(2-)(H(2)O)(n) and Q(+).NH(4)(+).MoO(4)(2-).(H(2)O)(n).     

Controlling the Dual-Emission Character of Aryl-Modified o-Carboranes by Intramolecular CH⋅⋅⋅O Interaction Sites

It is still challenging to realize a dual-emission system, in which two luminescent bands simultaneously appear by photoexcitation, in solid with organic dyes due to the difficulty in regulation of electronic properties in the excited state and concentration quenching. o-Carborane is known to be a versatile platform for constructing solid-state emitters since the sphere boron cluster is favorable for suppressing intermolecular interactions and subsequently concentration quenching. Here, we show solid-state dual-emissive o-carborane derivatives. We prepared 4 types of o-carborane derivatives and found dual-emission behaviors both in solution and solid states. By regulating the rotation at the o-carborane unit with the intramolecular C_cageH⋅⋅⋅O interaction, the dual-emission intensity ratios were changed. Finally, it was demonstrated that the overall photoluminescence spectra can be estimated using the binding energy of intramolecular interactions.     

Further studies on the reaction of amines and proteins with 4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole

The reaction of glycine with NBD-F (4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole) is investigated to establish conditions that provide a high formation rate of NBD-glycine and a low hydrolysis rate of the reagent. The reaction rate increases with higher temperature, larger contents of organic solvent and a sodium borate buffer. The use of borate buffer decreases ther ate of hydrolysis of the reagent. For low-molecular-weight amines, condition for a suitable liquid chromatographic postcolumn reactor include a high content of acetonitrile and 0.1 M sodium borate (pH 8.0–8.5). For proteins, separated by molecular-exclusion chromatography, water is needed for sensitive reactions. Suitable postcolumn reactor conditions include borate buffer (pH 7.9) containing 0.1 M potassium chloride, a 0.02% (w/v) NBD-F solution in acetonitrile with reaction at 50°C for about 45 s. The detection limits for human serum albumin, β-lactoglobulin and myoglobin are 6.6 pmol, 8.4 pmol and 11 pmol, respectively.