Bound site of Mo atoms and its local structure in a Mo/HY catalyst characterized by extended X-ray absorption fine structure and density functional calculation

The bound site of Mo atoms and its local structure in a Mo/HY catalyst have been determined by detailed analysis of extended X-ray absorption fine structure (EXAFS). Molybdenum was introduced in the supercage of HY zeolite by cycles of saturated adsorption of Mo(CO)6 at room temperature and subsequent thermal decomposition at 573 K. Two Mo atoms per supercage were immobilized in each CVD-thermal treatment cycle. The Mo loading increased linearly with the cycles up to three cycles at saturation, where six Mo atoms were supported. Temperature-programmed decomposition of the adsorbed Mo(CO)6 was also characterized by GC, QMS, and FT-IR, respectively. The EXAFS analysis including multiple scattering based on theoretical calculations revealed that Mo bound with two oxygen atoms connects to Al, where one of the two oxygen atoms had been associated with a proton. The bound site is called the S(III)' site. The zeolite framework was significantly distorted by the introduction of low-valent Mo, resulting in isolation of the [MoO2Al] unit from the surrounding zeolite framework due to a quasi-disruption of Si-O bonds adjacent to the unit. In the mild oxidation of the low-valent Mo/HY sample two Mo=O bonds were newly formed and the position of Mo was displaced by 0.06 nm so that the distortion of zeolite framework around the Al atom was relieved. The structures were also supported by DFT calculations. This study is the first example that the position of metal cation in zeolite was determined unambiguously by the EXAFS analysis.     

Structural assignment of isomeric 2-aminopyridine-derivatized oligosaccharides using negative-ion MSn spectral matching

To investigate the possibility of structural assignment based on negative-ion MS2 spectral matching, three isomeric pairs of 2-aminopyridine (PA)-derivatized non-fucosylated, fucosylated, and sialylated oligosaccharides (complex type N-glycans) were analyzed using high-performance liquid chromatography/ion trap mass spectrometry (HPLC/ITMS) with a sonic-spray ionization (SSI) source. In the SSI negative-ion mode the deprotonated molecule [M-2H]2- becomes prominent. Negative-ion MS2 spectra derived from such ions contain many fragment types (B and Y, C and Z, A, and D) and therefore are more informative than the positive-ion MS2 spectra derived from [M+H+Na]2+ ions, which usually consist mainly of B and Y fragment ions. In particular the internal ions (D- and E-type ions) provided useful information about the alpha1-6 branching patterns and the bisecting GlcNAc residue. Spectral matching based on the correlation coefficients between negative-ion MS2 spectra was performed in a manner similar to the positive-ion MS2 spectral matching previously reported. It was demonstrated that negative-ion MS2 spectral matching is as useful and applicable to the structural assignment of relatively large non-fucosylated, fucosylated, and sialylated PA-oligosaccharide isomers as its positive-ion counterpart.     

Sorption of ethanesulfonic acid by nylon-6 containing various numbers of end groups

From the analysis of the permeation of ³⁵S labeled ethanesulfonic acid, through nylon-6 films sorption isotherms were obtained. The films are characterized by their largely different content of carboxyl and amino end groups. It was found that the shape of the isotherm depends on the molar ratio of the two end groups: an S-shape curve for the film containing the carboxyl end group larger than the amino end group and a Langmuir-type curve for the film containing comparable numbers of end groups. These results were explained by the McGregor-Harris theory in which the acid dissociation constants of the two end groups in nylon were estimated experimentally.     

7,10,14-Tri-t-butyl-3-amino-1,8-bisdehydro[14]annulene

Tri-t-butylcarboxybisdehydro[14]annulene was converted by the Curtius reaction into unstable aminoannulene, which could be characterized as N-acetyl derivative. The pK_a-value of the aminoannulene reflects aromatic nature of the annulene nucleus.     

Double catalytic enantioselective Michael addition reactions of tertiary nucleophile precursors—tertiary/quaternary and quaternary/quaternary carbon–carbon bond formations

Enantioselective Michael addition reactions of tertiary nucleophile precursors, such as substituted malononitriles and cyclic 1,3-diketones, can be successfully activated by the metal complexes derived from R,R-DBFOX/Ph chiral ligand and cationic metal salts. With this method, the enantioselective tertiary/quaternary and quaternary/quaternary carbon–carbon bond formations can be achieved. Use of alcohol solvents is essential for the success, and ,β-unsaturated amides of 3,5-dimethylpyrazole are much better acceptors than those of 2-oxazolidinone.     

Influence of the Coordination of Donor Solvent Molecules to 1,4,7,10-Tetramethyl-1,4,7,10- tetraazacyclododecanenickel(II) and Analogous Nickel(II) Complexes on Their Steric Factors

Coordination equilibrium constants (K _NiS) of some donor solvent molecules to 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecanenickel(II) ([Ni(Me₄[12]aneN₄)]²⁺) were determined in nitrobenzene (a noncoordinating bulk solvent). The first (K _NiS1) and second stepwise coordination equilibrium constants (K _NiS2) for 1,4,7,10-tetraazacyclododecanenickel(II) ([Ni([12]aneN₄)]²⁺), 1,4,8,11-tetraazac yclotetradecane- nickel(II) ([Ni([14] aneN₄)]²⁺), 1,4,8,11-tetrathiacyclotetra-decanenickel(II) ([Ni([14]aneS₄)]²⁺) were also reinvestigated. The K _NiS values for [Ni(Me₄[12]aneN₄)]²⁺ were compared to those of [Ni([12]aneN₄)]²⁺, (1R,4S, 8R,11S)-1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecanenickel(II) (R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺), R,R,S,S-[Ni(Me₄[14]aneN₄)]²⁺, [Ni([14]aneN₄)]²⁺, and [Ni([14]aneS₄)]²⁺. Coordination of pyridine (Py), N,N,N′,N′-tetramethylurea (TMU), and N,N-dimethylacetamide (DMA) to [Ni(Me₄[12]aneN₄)]²⁺ was observed, although these donor solvent molecules did not coordinate to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺. The K _NiS values for Py, TMU, and DMA are 7.9, 2.8, and 9.0 dm³⋅mol⁻¹, respectively. Some hydrogen-bonding waters were coordinated to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺, but such waters did not coordinate to [Ni(Me₄[12] aneN₄)]²⁺. Also, the K _NiS2 values were larger than the corresponding K _NiS1 values for [Ni([14]aneS₄)]²⁺. Furthermore, the K _NiS1 values for [Ni([12]aneN₄)]²⁺ were the largest among these nickel(II) complex cations. The K _NiS, K _NiS1, and K _NiS2 values are discussed in terms of properties of the donor solvents and steric strains of these nickel(II) complex cations.     

Sequential pericyclic reaction of ene-diallenes: an efficient approach to the steroid skeleton

[reaction: see text] The one-pot construction of polycyclic aromatic systems from acyclic ene-bis(propargyl alcohols) was achieved through a tandem dual [2,3]-sigmatropic rearrangement/6pi-electrocyclic reaction/intramolecular [4 + 2] cycloaddition sequence. A steroidal compound was conveniently synthesized using the present method.     

Synthesis and evaluation of fluorogenic reagents for simultaneous detection of peptides and proteins by HPLC in two different samples

To find the pairs of fluorogenic reagents having similar retention times in HPLC but with different fluorescent characteristics, six fluorogenic reagents bearing benzoxadiazole or benzoselenadiazole skeletons were synthesized. The resultant derivatives obtained from the reaction of peptides and proteins with reagents which have a benzoselenadiazole skeleton showed different fluorescence characteristics from those with a benzoxadiazole skeleton. Since each corresponding derivatives of trypsin inhibitor and BSA with DAABD-Cl and 7-fluoro-N-[2-(diethylamino)ethyl]-2,1,3-benzoselenadiazole-4-sulfonamide (DEAEABSeD-F) have similar retention times, the pair of reagents was adopted for the sensitive simultaneous detection of proteins in two different samples. When the soluble fraction of mouse hippocampus was divided into the two samples (A and B), each was reacted with DEAEABSeD-F for A and DAABD-Cl for B, respectively. The two reaction solutions were combined and subjected to HPLC analysis with two fluorescent detectors in series (excitation and emission at different wavelengths for A and B, respectively). The resultant two chromatograms had quite similar patterns for each other. The new pair of fluorogenic reagents (DAABD-Cl and DEAEABSeD-F) would be applicable to proteomics studies using the previously reported FD-LC-MS/MS method.     

Microfaceting explains complicated structures on rutile TiO2 surfaces

Surface structures on rutile TiO2 (001) have been studied by using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional calculations. Prior investigations have observed many kinds of complicated surface structures; however, detailed atomic structures and the mechanism of the reconstructions are still unknown. We evaluate the energetical stability of the surface structures. The calculational results suggest that a [111] microfaceting model is energetically stable compared with the unreconstructed (1 x 1) model. We propose microfaceting structural models that are in good agreement with atomically resolved STM images. This structural concept can be extended to other rutile TiO2 surfaces in general.     

Vinyl Polymerization. 418. Polymerization of Vinyl Monomer Initiated by Betaine-Type Polymers in Aqueous Solution

Abstract

Three kinds of betaine-type polymers, which are macromolecular amphoteric electrolytes, were found to be able to polymerize vinyl monomers in aqueous solution through a radical mechanism without any further initiator. Betain-type polymers form hydrophobic areas (HA) in water. Vinyl polymerization commenced in the HA. The effect of the pH of the aqueous solution on polymerization was investigated.