Distribution and dynamics of radionuclides and stable elements in the coastal waters off Rokkasho Village, Japan, prior to the opening of a nuclear reprocessing facility

A nuclear fuel reprocessing facility is currently under construction in Rokkasho Village, Aomori, Japan. After completion and start-up, this facility will discharge radionuclides into the Pacific Ocean through an outlet pipe set on the seafloor offshore. For future assessments of the stability of these radionuclides in the environment, a sufficient understanding of the behavior of radionuclides in this ocean ecosystem before the start-up of the facility is necessary. To understand the processes by which radionuclides and various other types of elements are eliminated from seawater, we measured the sedimentation flux of suspended particles in the coastal waters off Rokkasho Village where the sea emissions pipes will be placed. This revised version was published online in August 2006 with corrections to the Cover Date.     

A new synthetic approach to phenol derivatives: use of ring-closing olefin metathesis

Phenol derivatives, which are one of the most important classes of aromatic compounds in organic chemistry, were synthesized by ruthenium-catalyzed ring-closing olefin metathesis (RCM) of 1,4,7-trien-3-ones with versatile substitution patterns. The RCM reaction for producing phenol derivatives was also successful with 1,5,7-trien-3-one as another precursor. Most of the phenols prepared here could not be obtained easily by conventional methods.     

Investigation of thermal hazard during the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In this study, we examined the reaction hazard during the hydrosilylation reaction between trichlorosilane (TCS) and 1,6-divinyl(perfluorohexane) (FDV) in the presence of a butanol solution of chloroplatinic acid (Pt-Cat) as the catalyst. Assuming the three industrial risks of excessive addition of Pt-Cat, contamination by iron rust and mixing with cooling water, we observed the temperature and pressure change of TCS/FDV with an excessive amount of Pt-Cat, TCS/FDV/Pt-Cat with Fe₂O₃ and TCS/FDV/Pt-Cat with distilled water, using an accelerating rate calorimeter (ARC). The temperature and pressure greatly increased, especially in the sample with Fe₂O₃. For instance, in TCS/FDV/Pt-Cat with 1.5 wt.% Fe₂O₃, the heat release rate exceeded 624 K · min^?1 and the pressure rose above 25 MPa during the exothermic reaction.     

Kinetic resolution of racemic α-tert-alkyl-α-hydroxy esters by enantiomer-selective carbamoylation

Kinetic resolution of sterically hindered racemic α-tert-alkyl-α-hydroxy esters is performed by enantiomer-selective carbamoylation with the t-Bu-Box-Cu(II) catalyst (Box = bis(oxazoline)). The reaction with 0.5 equiv of n-C(3)H(7)NCO is carried out with a substrate-to-catalyst molar ratio of 500-5000 at -20 to 25 °C. The high enantiomer-discrimination ability of the catalyst achieves an excellent stereoselectivity factor (s = k(fast)/k(slow)) of 261 in the best case. A catalytic cycle for this reaction is proposed.     

MOF-on-MOF heteroepitaxy: perfectly oriented [Zn2(ndc)2(dabco)]n grown on [Cu2(ndc)2(dabco)]n thin films

We report the successful heteroepitaxial growth of perfectly oriented hybrid MOF thin films. By employing step-by-step liquid-phase epitaxy (LPE), [Zn(2)(ndc)(2)(dabco)](n) was grown on [Cu(2)(ndc)(2)(dabco)](n), thus demonstrating that the MOF-on-MOF deposition scheme developed for powdered microcrystalline MOF materials can also be applied in connection with LPE for MOF thin films or multilayers. The deposition was monitored by surface plasmon resonance (SPR) spectroscopy, the resulting MOF heterostructures were characterized using IR spectroscopy and different types of X-ray diffraction (XRD)-based techniques. The results suggest that the LPE method is a promising way to fabricate and grow MOF heterostructures, and also demonstrates the potential of [Cu(2)(ndc)(2)(dabco)](n) MOF thin films as substrates for the LPE-based growth of different MOFs on top.     

Versatile glycoblotting nanoparticles for high-throughput protein glycomics

We have developed an effective and practical trap-and-release method based on chemoselective ligation of carbohydrates with reactive aminooxyl groups attached to the surface of nanoparticles (referred to as glycoblotting nanoparticles). These glycoblotting nanoparticles were synthesized by UV irradiation of diacetylene-functionalized lipids that contain the aminooxyl group. The glycoblotting nanoparticles captured carbohydrates in aqueous solution under mild conditions and were collected by simple centrifugation. The trapped carbohydrates were effectively released from the nanoparticles under acidic conditions to give pure oligosaccharides. This glycoblotting process reduced the time required for the purification process of carbohydrates to less than 6 h, compared to the several days needed for conventional chromatographic techniques. The oligosaccharides (N-glycan) were released from ovalbumin (glycoprotein) by PNGase F after tryptic digestion. MALDI-TOF mass spectra before purification did not show any significant signals corresponding to N-glycans because these signals were hidden by the large signals of the abundant peptides. However, after purification with the glycoblotting nanoparticles, only signals corresponding to oligosaccharides appeared. We also demonstrated a clear analysis of the oligosaccharides contained in the mice dermis by means of glycoblotting.     

1,4‐Bis[2‐(4‐ferrocenylphenyl)ethynyl]anthraquinone from synchrotron X‐ray powder diffraction

The title compound, [Fe₂(C₅H₅)₂(C₄₀H₂₂O₂)] or 1,4‐(FcPh)₂Aq [where FcPh is 2‐(4‐ferrocenylphenyl)ethynyl and Aq is anthraquinone], was synthesized in an attempt to obtain a new solvent‐incorporating porous material with a large void space. Thermodynamic data for 1,4‐(FcPh)₂Aq show a phase transition at approximately 430 K. The crystal structure of solvent‐free 1,4‐(FcPh)₂Aq was determined at temperatures of 90, 300 and 500 K using synchrotron powder diffraction data. A direct‐space method using a genetic algorithm was employed for structure solution. Charge densities calculated from observed structure factors by the maximum entropy method were employed for model improvement. The final models were obtained through multistage Rietveld refinements. In both phases, the structures of which differ only subtly, the planar Aq fragments are stacked alternately in opposite orientations, forming a one‐dimensional column. The FcPh arms lie between the stacks and fill the remaining space, leaving no voids. C—H...π interactions between the Ph and Fc fragments mediate crystal packing and stabilization.     

Association Model and Its Representation of Phase Equilibria and Excess Enthalpies of Alcohol, Aniline, and Acetonitrile Mixtures

An association model is presented to describe vapor–liquid equilibria,liquid–liquid equilibria, and excess enthalpies of binary and ternary liquid solutionscontaining alcohols, aniline, and/or acetonitrile using the concepts of linearself-association of associated components and of solvation between unlike molecules.Calculated results also show that the model works well in representing thethermodynamic properties for alcohol + aniline, alcohol + acetonitrile, andalcohol + alcohol mixtures.     

Chemical constituents of Glycosmis citrifolia (Willd.) Lindl. Structures of four new acridones and three new quinolone alkaloids

The structures of two new dimeric acridone alkaloids, glycobismine-D (1) and -E (2), having a novel linkage as binary acridones, three monomeric acridones, glycocitrine-IV (3), -V (4), and -VI (5), and three quinolone alkaloids, glycocitlone-A (6), -B (7), and -C (8) from Glycosmis citrifolia (Willd.) Lindl. (Rutaceae) have been elucidated by spectrometric studies.