Reactive oligomers. II. Polymerization of glycol bis(allyl phthalate)s and glycol bis(allyl succinate)s

Seven glycol bis(allyl phthalate)s (GBAP) and four glycol bis(allyl succinate)s (GBASu) as reactive oligomers were prepared and their polymerization behaviors were investigated in detail in terms of cyclopolymerization and gelation as compared with diallyl dicarboxylates. Thus, the rates of polymerization of GBAPs were reduced compared to diallyl phthalate, being attributed to the steric effect on the intermolecular propagation of the uncyclized radical, whereas those of GBASus were enhanced as a consequence of intermolecular association by dipole–dipole interaction in polar GBASu monomers. Cyclization was enhanced in the following order: diallyl aliphatic dicarboxylates series < GBASu series < GBAP series. Gelation was discussed according to Gordon's theory; the actual gel-point conversions increased with an increase in the molecular weight of monomers, although the discrepancy between actual and theoretical gel-point conversion inversely tended to be decreased. The decreased delay in gelation with an increase of the molecular weight of monomers is ascribed to the reduction of excluded volume effects on crosslinking.     

Development of hydrophilic fluorogenic derivatization reagents for thiols: 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole

Sensitive, reactive, and hydrophilic fluorogenic reagents for thiols with the benzofurazan skeleton, 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (AcABD-F) and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (TCAcABD-F) have been developed. These reagents reacted with thiols within 10 min at 60 degrees C. AcABD-F and TCAcABD-F themselves do not fluoresce but are strongly fluorescent after the reaction with thiol compounds. The generated derivatives were highly water-soluble, since they dissociated a proton and ionized in the neutral pH region. The derivatives with four biologically important thiol compounds were separated on a reversed-phase HPLC column and detected fluorometrically at 504 nm with excitation at 388 nm. The detection limit attained for homocysteine with AcABD-F was 25 fmol on column (11 nM) (signal-to-noise ratio = 3), and that for glutathione with TCAcABD-F was 45 fmol on column (20 nM).     

Structural regulation of a peptide-conjugated graft copolymer: a simple model for amyloid formation

The self-assembly of peptides and proteins into beta-sheet-rich high-order structures has attracted much attention as a result of the characteristic nanostructure of these assemblies and because of their association with neurodegenerative diseases. Here we report the structural and conformational properties of a peptide-conjugated graft copolymer, poly(gamma-methyl-L-glutamate) grafted polyallylamine (1) in a water-2,2,2-trifluoroethanol solution as a simple model for amyloid formation. Atomic force microscopy revealed that the globular peptide 1 self-assembles into nonbranching fibrils that are about 4 nm in height under certain conditions. These fibrils are rich in beta-sheets and, similar to authentic amyloid fibrils, bind the amyloidophilic dye Congo red. The secondary and quaternary structures of the peptide 1 can be controlled by manipulating the pH, solution composition, and salt concentration; this indicates that the three-dimensional packing arrangement of peptide chains is the key factor for such fibril formation. Furthermore, the addition of carboxylic acid-terminated poly(ethylene glycol), which interacts with both of amino groups of 1 and hydrophobic PMLG chains, was found to obviously inhibit the alpha-to-beta structural transition for non-assembled peptide 1 and to partially cause a beta-to-alpha structural transition against the 1-assembly in the beta-sheet form. These findings demonstrate that the amyloid fibril formation is not restricted to specific protein sequences but rather is a generic property of peptides. The ability to control the assembled structure of the peptide should provide useful information not only for understanding the amyloid fibril formation, but also for developing novel peptide-based material with well-defined nanostructures.     

XPS study on valence band structures of transition-metal trisulfides,TiS3, NbS3, and TaS3

Transition-metal trisulfides, TiS₃, NbS₃, and TaS₃, with a quasi-one-dimensional structure are investigated by X-ray photoelectron spectroscopic (XPS) measurements to obtain information on the valence band structures. The band structures at the Fermi level of these compounds correspond well to their transport properties. A shoulder is observed at the top of the valence band in NbS₃ and TaS₃, suggesting that this band is made up of the metal d_z² electrons. The d_z² band is occupied in NbS₃ and TaS₂ and empty in TiS₃. The characteristic features at the top of the valence band in NbS₃ imply the occurrence of d_z² band separation, which leads to a semiconducting nature.     

Gas permeability and permselectivity of fluorinated polybenzoxazoles

Gas permeability and permselectivity are investigated for polybenzoxazoles from bis(3-amino-4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane (BAHHP) and aromatic diacid chlorides. Effects of thermal cyclization on the permeation properties are also investigated. The polybenzoxazole from BAHHP and 4,4′-(1,1,1,3,3,3-hexafluoroisopropylidene)dibenzoyl chloride (HFDB) displays high performance for CO₂/CH₄ separation ( $ {\rm P}_{{\rm CO}_2 } $ = 6.1 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, and $ {{{\rm P}_{{\rm CO}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm CO}_2 } } {{\rm P}_{{\rm CH}_4 } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_4 } }} $ = 38 at 35°C). The polybenzoxazole from BAHHP and 2,6-naphthalene dicarbonyl chloride displays high performance for H₂/CO or H₂/CH₄ separation ( $ {\rm P}_{{\rm H}_2 } $ = 2.4 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CO}} }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CO}} }} $ = 71, and $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CH}_{\rm 4} } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_{\rm 4} } }} $ = 250). Permeation properties for the polybenzoxazole from BAHHP and HFDB are close to those for a polyimide of similar chemical structure. The permeation properties are discussed in connection with packing density and local segmental mobility. © 1992 John Wiley & Sons, Inc.     

Experimental demonstration of plasmonic racetrack resonators with a trench structure

We fabricated and investigated a plasmonic racetrack resonator with a trench structure. Trench channel plasmon polaritons excited by end-fire coupling at a wavelength of 633 nm are observed in the fabricated racetrack resonator. The racetrack resonator also worked as a plasmonic racetrack resonator. The experimental and simulation results of the electric field distributions are in good agreement.     

On Calabi’s Strong Maximum Principle via Local Semi-Dirichlet Forms

We give a stochastic proof of an extension of E. Calabi??s strong maximum principle under some geometric conditions in the framework of strong Feller diffusion processes associated to local regular semi-Dirichlet forms with lower bounds. As a corollary, our notion of subharmonicity implies a notion of viscosity subsolution in a stochastic sense. We can apply our result to singular geometric object like Alexandrov space, limit space under spectral distance of Riemannian manifolds with uniform lower Ricci curvature bound and so on.     

Synthesis and nanoimprinting of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry

This work demonstrates the UV nanoimprinting lithography (UV-NIL) of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry. Herein, 9,9-bis(3-mercaptopropylphenylether)fluorene (BMPF) is designed as a new thiol monomer with a high refractive index, high transparency, and good processability for UV-NIL. Colorless polythioethers are synthesized from BMPF and ene monomers under mild thiol-ene click reaction conditions. Excellent transmittance (96%) of 400 nm light is observed in all the polymer films and high refractive index values of 1.5972–1.6382 are attained. UV-NIL using thiol-ene photopolymerization affords polymer nanoimprinting patterns with various features on the order of 100–500 nm without any fractures. To the best of our knowledge, this is the first report on UV-NIL of high refractive index and highly transparent polymers. Through proper monomer and polymer design, novel polythioethers with suitable glass transition temperature (T _g) values are developed with high refractive index, high transparency, and good UV-NIL processability. Furthermore, UV-NIL based on thiol-ene click chemistry is accomplished at the nanoscale. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2175–2182     

Cholesteric induction power of β-galactose derivatives

Galactose derivatives were explored as chiral dopants, effective for inducing chiral nematic liquid crystal (LC) phases. Galactose bearing O-isopropylidene substituents at the C3 and C4 and butoxybiphenyl substituents at the C2 and C6 positions exhibits a high helical twisting power (HTP) value of ?74.4 μm^?1. Such a high HTP value for the galactose derivative is attributed to (1) linkage of the C3 and C4 carbons with the O-isopropylidene substituent, which places the C2 and C6 substitutes in a skew arrangement at a large angle and (2) enhancement of the affinity with the host nematic LCs by incorporating aromatic substituents at the C2 and C6 positions that are similar to those in the host.