Practical and robust method for stereoselective preparations of ketene silyl (thio)acetal derivatives and NaOH-catalyzed crossed-Claisen condensation between ketene silyl acetals and methyl esters

We developed an efficient, practical, and robust method for stereoselective preparations of (Z)-ketene trimethylsilyl (TMS) thioacetals from thioesters and alkyl (1Z)- or (1Z,3E)-1,3-bis(TMS)dienol ethers from alkyl β-ketoesters. The former preparation was performed by convenient procedure (LDA-TMSCl, 0-5 °C, 2.5 h), while the latter preparation involved convenient method A (2NaHMDS-2TMSCl) and cost-effective method B (NaH, NaHMDS-2TMSCl). The first catalytic NaOH-catalyzed crossed-Claisen condensation between ketene silyl acetals and methyl esters proceeded successfully to give a variety of α-monomethyl β-ketoesters and inaccessible α,α-disubstituted β-ketoesters. For further extension, a couple of Claisen-aldol tandem reactions of the obtained β-ketoester analogues utilizing TiCl₄ and TiCl₄-Bu₃N reagents smoothly proceeded with good to excellent stereoselectivity.     

Fabrication of carbon nanotube sheets and their bilirubin adsorption capacity

Bilirubin adsorption on carbon nanotube surfaces has been studied to develop a new adsorbent in the plasma apheresis. Powder-like carbon nanotubes were first examined under various adsorption conditions such as temperatures and initial concentrations of bilirubin solutions. The adsorption capacity was measured from the residual concentrations of bilirubin in the solution after the adsorption process using a visible absorption spectroscopy. We found that multi-walled carbon nanotubes (MWCNTs) exhibit greater adsorption capacity for bilirubin molecules than that of single-walled carbon nanotubes (SWCNTs). To guarantee the safety of the adsorbents, we fabricated carbon nanotube sheets in which leakage of CNTs to the plasma is suppressed. Since SWCNTs are more suitable for robust sheets, a complex sheet consisting of SWCNTs as the scaffolds and MWCNTs as the efficient adsorbents. CNT/polyaniline complex sheets were also fabricated. Bilirubin adsorption capacity of CNTs has been found to be much larger than that of the conventional materials because of their large surface areas and large adsorption capability for polycyclic compound molecules due to their surface structure similar to graphite.     

Solid-state 17O NMR study of the electric-field-gradient and chemical shielding tensors in polycrystalline gamma-glycine

We report the first experimental determination of the carboxylate oxygen electric-field-gradient (EFG) and chemical shielding (CS) tensors in polycrystalline γ-glycine. Analysis of magic-angle spinning (MAS) and stationary ¹⁷O NMR spectra of [¹⁷O]-γ-glycine obtained at 9.4, 14.1, 16.4, and 18.8 T yields the magnitudes of the ¹⁷O EFG and CS tensors and the relative orientations between the two tensors. Extensive quantum chemical calculations at both the restricted Hartree–Fock and density functional levels have been performed to present the absolute tensor orientations in term of the molecular frame. We have demonstrated that ¹⁷O NMR tensor information could be unambiguously derived by the multiple field analyses of stationary ¹⁷O NMR spectra.     

Protein adsorption resistant surface on polymer composite based on 2D- and 3D-controlled grafting of phospholipid moieties

To prepare the biocompatible surface, a phosphorylcholine (PC) group was introduced on this hydroxyl group generated by surface hydrolysis on the polymer composite composed of polyethylene (PE) and poly (vinyl acetate) (PVAc) prepared by supercritical carbon dioxide. Two different procedures such as two-dimensional (2D) modification and three-dimensional (3D) modification were applied to obtain the steady biocompatible surface. 2D modification was that PC groups were directly anchored on the surface of the polymer composite. 3D modification was that phospholipid polymer was grafted from the surface of the polymer composite by surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-methacryloyloxyethyl phosphorylcholine (MPC). The surfaces were characterized by X-ray photoelectron spectroscopy, dynamic water contact angle measurements, and atomic force microscope. The effects of the poly(MPC) chain length on the protein adsorption resistivity were investigated. The protein adsorption on the polymer composite surface with PC groups modified by 2D or 3D modification was significantly reduced as compared with that on the unmodified PE. Further, the amount of protein adsorbed on the 3D modified surface that is poly(MPC)-grafted surface decreased with an increase in the chain length of the poly(MPC). The surface with an arbitrary structure and the characteristic can be constructed by using 2D and 3D modification. We conclude that the polymer composites of PE/PVAc with PC groups on the surface are useful for fabricating biomedical devices due to their good mechanical and surface properties.     

Change in work function during phase transition of Sc-O/W(1 0 0) system at high temperatures

The change in work function during the phase transition of a Sc-O/W(1 0 0) system at high temperatures of 1500-1700 K was investigated in order to elucidate the mechanism of the decrease in the work function of a (1 × 1)-Sc-O/W(1 0 0) surface. For the measurement of the work function using a secondary electron method at high temperatures, a sample holder was uniquely designed in order to suppress contributions of a large number of thermionic electrons emitted from a low-work-function surface. The obtained work function revealed that the change in work function strongly correlates with the coverage of Sc-O complexes, the stoichiometry of which is Sc₁O₁. The higher the coverage of ScO is, the lower the work function is, suggesting that the work function of the (1 × 1)-Sc-O/W(1 0 0) surface is reduced by the formation of ScO electric dipoles. Furthermore, the decrease in work function was modeled in combination with a previously reported kinetic model describing surface phenomena, i.e., the oxidation, oxygen desorption, diffusion and surface segregation of Sc-O complexes, during the phase transition of the Sc-O/W(1 0 0) surface at high temperatures. It was confirmed that the proposed model can explain the experimentally obtained change in work function very well. The value of the dipole moment of a ScO electric dipole was determined to be 2.7 × 10⁻³⁰ C m.     

Transparent Ta3N5 Photoanodes for Efficient Oxygen Evolution toward the Development of Tandem Cells

Photoelectrochemical water splitting is regarded as a promising approach to the production of hydrogen, and the development of efficient photoelectrodes is one aspect of realizing practical systems. In this work, transparent Ta₃N₅ photoanodes were fabricated on n‐type GaN/sapphire substrates to promote O₂ evolution in tandem with a photocathode, to realize overall water splitting. Following the incorporation of an underlying GaN layer, a photocurrent of 6.3 mA cm^?2 was achieved at 1.23 V vs. a reversible hydrogen electrode. The transparency of Ta₃N₅ to wavelengths longer than 600 nm allowed incoming solar light to be transmitted to a CuInSe₂ (CIS), which absorbs up to 1100 nm. A stand‐alone tandem cell with a serially‐connected dual‐CIS unit terminated with a Pt/Ni electrode was thus constructed for H₂ evolution. This tandem cell exhibited a solar‐to‐hydrogen energy conversion efficiency greater than 7 % at the initial stage of the reaction.     

Encouragements for the Use of Microwaves in Industrial Chemistry

Microwave travels at the speed of light, and transfers energy solely to materials. This holds great promise for energy conservation in industrial processes. However, due to differences with common heating principles, and misunderstanding of the correct way to handle them, the effectiveness of microwaves has been underestimated, and development of technologies using microwaves often stops due to this. This paper has focused on the use of microwave heating for organic/polymer synthesis, specifically for a highly effective condensation reaction and for use with ionic reactants. In addition to covering the process of ascertaining which reactions are suitable for the application of microwave heating, and introducing studies on scaling these up, this paper covers points of caution, especially those relating to the all‐important measurement/control of temperature. Based on their accumulation of expertise in the area, the authors present the design for equipment/plants for industrial use and introduce their research into the practical application of such technology.