Nuclear quadrupole resonance of norephedrine

Toward searching for illegal drugs, we investigated the pulsed nuclear quadrupole resonance (NQR) response of ¹⁴N in (1R,2S)-(-)-norephedrine, based on the predictions of quantum chemical calculations. Two pairs of spectral lines (ν₊=3.089, 3.093 MHz and ν₋=2.594, 2.608 MHz) were observed despite its molecule structure having only a single nitrogen atom. This indicates that the molecular crystal has two nonequivalent nitrogen atoms in the unit cell. The temperature dependence of the NQR frequencies and relaxation properties were investigated for the purpose of accurate remote sensing of the drugs. The NQR frequency shift was approximately 0.23 kHz/K around room temperature. The spin-lattice relaxation and spin-phase memory times were 5.2–10.2 ms and 0.6–1.5 ms, respectively.     

Electrochemically stable fluorohydrogenate ionic liquids based on quaternary phosphonium cations

Fluorohydrogenate ionic liquids of quaternary phosphonium cations, tri-n-butylmethylphosphonium (P₄₄₄₁) fluorohydrogenate, tetra-n-butylphosphonium (P₄₄₄₄) fluorohydrogenate, and tri-n-butyl-n-octylphosphonium (P₄₄₄₈) fluorohydrogenate, have been synthesized by the metatheses of anhydrous hydrogen fluoride and the corresponding phosphonium chloride precursors. All the obtained salts have melting points below room-temperature with a vacuum-stable composition of P_444m(FH)_2.3F (m = 1, 4, and 8) and were characterized by density, conductivity, and viscosity measurements. Linear sweep voltammetry with a glassy carbon working electrode shows that the P_444m(FH)_2.3Fs have wide electrochemical windows exceeding 5.2 V. In particular, P₄₄₄₁(FH)_2.3F has an electrochemical window of 6.0 V, which is the widest among fluorohydrogenate ionic liquids reported to date. The thermal stability of these ionic liquids is also improved compared to the salts of N-heterocyclic ammonium cations.     

Effect of Anomeric Linkage on the Sialylation of Glycosides by Cells

The synthesis of sialylated glycosides using saccharide primers and cells was investigated. α · and β · Saccharide primers were chemically synthesized and introduced into B16 melanoma cells to prime oligosaccharide synthesis. Incorporation of α‐ and β‐dodecyl lactosides into B16 cells resulted in the sialylation of the galactose residue to give GM3‐type oligosaccharides. The β‐dodecyl galactoside primer was sialylated but the α‐dodecyl galactoside primer was not. Both the α‐ and β‐dodecyl glucoside primers were not elongated. In the glycosylation of primers by cells, this research confirmed that sialyl transferases tolerate acceptor modifications and are permissive to primer elongation regardless of the α‐ or β‐linkage to the aglycon unit. However, the presence of the terminal galactose residue that is β‐linked to the adjacent saccharide or aglycon unit is essential for sialylation by cellular enzymes to occur.     

Substrate-assisted laser patterning of indium tin oxide thin films

Maskless laser patterning of indium tin oxide (ITO) thin films was studied by the use of a diode-pumped Q-switched Nd:YLF laser. The ITO films were sputter-deposited either on lime glass, the standard substrate material for flat panel display applications, or fused quartz so that the efficiency of laser patterning as a function of substrate absorption could be studied. The laser wavelength was varied among infrared (5=1047 nm), visible (5=523 nm), and ultraviolet (5=349 nm and 5=262 nm). It is observed that strong light absorption by the substrate is a crucial requirement for a residue-free patterning of the ITO film. Observations and numerical calculations of the laser-induced surface temperature indicate that material removal occurs via thermal vaporization and that other mechanisms such as photochemical decomposition or spallation can be neglected.     

Analysis of liquid structure without construction of any structure models by the X-ray scattering method.

A simple approach for determining a liquid structure using X-ray scattering data, in which a liquid structure is uniquely evaluated without construction of any plausible structure models, has been applied to liquid acetonitrile, acetone and cyclohexane. For a pair of molecules, a given point within a molecule is located at the origin with a given molecular orientation. The site of the given point of another molecule is defined by the polar coordinates and the molecular orientation is treated by three Eulerian angles. These parameters are optimized by a non-linear least-squares calculation applied to X-ray scattering data. The reliability of the method was examined by determining the liquid structure of polar acetonitrile and the obtained intermolecular interatomic distances are in good agreement with the previously reported values. The method was then successfully applied to the determination of the liquid structure of acetone and cyclohexane. Especially for nonpolar cyclohexane, the construction of a variety of plausible structural models is very difficult. It was revealed that acetone has an ordered liquid arrangement similar to that found in its crystal, although the intermolecular distances in liquid acetone are different from those in the crystal. On the other hand, the liquid structure of cyclohexane is disordered.     

Copolymerization of ethylene or propylene with α‐olefins containing hydroxyl groups with zirconocene/methylaluminoxane catalyst

Copolymerization of olefins (ethylene and propylene) and 5‐hexen‐1‐ol pretreated with alkylaluminum was performed using [dimethysilylbis(9‐fluorenyl)]zirconium dichloride/methylaluminoxane as the catalyst. The copolymerization required extra addition of alkylaluminum to prevent deactivation of the catalyst when 5‐hexen‐1‐ol was pretreated with trimethylaluminum, whereas the triisobutylaluminum‐treated system did not require any addition of alkylaluminum. The molecular weight of the copolymer depended on the kind of alkylaluminum compound (masking reagent, additive, and cocatalyst). ¹³C NMR analysis proved that poly(ethylene‐co‐5‐hexen‐1‐ol) containing 50 mol % of 5‐hexen‐1‐ol acted as an alternating copolymer, whereas the poly(propylene‐co‐5‐hexen‐1‐ol) acted as a random copolymer. The surface property of the copolymers was simply evaluated by means of water drop contact angle measurement. It was found that the copolymers containing large amounts of 5‐hexen‐1‐ol units showed good hydrophilic properties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 52–58, 2004     

Dynamic photoelastic analysis by optical heterodyne polarimetry

This paper describes the mapping of the spatiotemporal principal stress distribution evolved with time in an epoxy photoelastic sample. In the optical heterodyne polarimeter exploited, the signal beam of light transmitted by the sample under continuously loaded condition is photomixed with the local oscillator beam of light made up of orthogonal linearly polarized two-frequency components. Every pixel of a MOS video camera used generates a beat photocurrent that possesses the two orthogonal field components of the elliptically polarized signal beam. The spatiotemporal principal stress distributions can be uniquely determined simultaneously and independently from these two orthogonal field components, and are successfully mapped in a time-sequential form. The spatial and temporal resolutions in the maps are 0.18 mm and 2.9 ms, respectively.     

High-speed 1.55 μm InGaAs/InGaAsP multi-quantum well λ/4-shifted DFB lasers

The high-speed modulation properties of 1.5 μm multiquantum-well λ/4-shifted DFB lasers are filly reviewed. In particular, the dependence of intrinsic dynamic properties, such as relaxation oscillation frequency, nonlinear damping phenomenon, and spectral chirping under 10 Gbit/s direct modulation, on the number of quantum wells is systematically investigated and compared with those of bulk lasers. The results indicate that the dependence of the above three factors on the number of wells is clearly explained by the linear gain saturation of the quantum-well lasers and that the optimum number of wells should be more than ten in order to increase the modulation bandwidth.     

A microporous membrane-based continuous generation system for trace-level standard mixtures of atmospheric gases.

A reliable and convenient system to generate accurate and stable standard gas mixtures of various atmospheric compounds at parts-per-billion levels has been developed. The system is of simple design; the generator is a coil consisting of an inner tube of microporous polytetrafuluoroethylene (PTFE) membrane tubing and an outer tube of silicone tubing. An aqueous solution of the given compound continuously flows through the inner microporous tube and the purge gas flows through the annulus between the inner and outer tubes. In addition to the generation of gas mixtures based on Henry's law, the proposed flow-type system offers generation based on chemical reactions, leading to a distinct advantage of the availability of continuous sources of various compounds. The generation system was tested for preparing standard gas mixtures of HCHO and H2O2 on the basis of Henry's law, and those of HNO2, NO, and SO2 on the basis of chemical reactions. A stable generation of the desired low concentrations of various kinds of gas mixtures can be readily achieved by adjusting the concentration of the solution without the use of high-dilution flow.