One-dimensional ion transport in self-organized columnar ionic liquids

New fan-shaped ionic liquids forming columnar liquid crystalline phases have been prepared to obtain one-dimensional ion-transporting materials. The ionic liquids consist of two incompatible parts: an imidazolium-based ionic part as an ion-conducting part and tris(alkyloxy)phenyl parts as insulating parts. Two compounds having octyl and dodecyl chains have been synthesized. Self-assembly of these materials leads to the formation of thermotropic hexagonal columnar liquid crystalline states at room temperature. Anisotropic one-dimensional ionic conductivities have been successfully measured by the cells having comb-shaped gold electrodes. The self-organized columns have been aligned macroscopically in two directions by shearing perpendicular and parallel to the electrodes. The ionic conductivities parallel to the column axis are higher than those perpendicular to the axis. The incorporation of lithium salts in these columnar materials leads to the enhancement of the ionic conductivities and their anisotropy. These materials would be useful for anisotropic transportation of ions at the nanometer level.     

Preparation of rapidly disintegrating tablet using new types of microcrystalline cellulose (PH-M series) and low substituted-hydroxypropylcellulose or spherical sugar granules by direct compression method

To decrease the sensation of roughness when a tablet, which is rapidly disintegrated by saliva (rapidly disintegrating tablet), is orally taken, we prepared rapidly disintegrating tablets using microcrystalline cellulose (Avicel PH-M series), a new type of pharmaceutical excipient that is spherical and has a very small particle size (particle size, 7-32 microm), instead of conventional microcrystalline cellulose (PH-102) used in the formulation of tablets containing acetaminophen or ascorbic acid as model drugs for tableting study. Tablets (200 mg) prepared using spherical microcrystalline cellulose, PH-M-06, with the smallest particle size (mean value, 7 microm) had sufficient crushing tolerance (approximately, 8 kg) and were very rapidly, disintegrated (within 15 s) when the mixing ratio of PH-M-06 to low-substituted hydroxypropylcellulose (L-HPC) was 9:1. Sensory evaluation by volunteers showed that PH-M-06 was superior to PH-102 in terms of the feeling of roughness in the mouth. Consequently, it was found that particle size is an important factor for tablet preparation using microcrystalline cellulose. It is possible to prepare drugs such as acetaminophen and ascorbic acid (concentration of approximately 50%) in the tablet form using PH-NM-06 in combination with L-HPC as a good disintegrant at a low compression force (1-6 kN). To solve the problem of poor fluidity in the preparation of these tablets, we investigated the use of spherical sugar granules (Nonpareil, NP-101 (sucrose and starch, composition ratio of 7:3), NP-103 (purified sucrose), NP-107 (purified lactose) and NP-108 (purified D-mannitol)). Rapidly disintegrating tablets can be prepared by the direct compression method when suitable excipients such as fine microcrystalline cellulose (PH-M-06) and spherical sugar granules (NP) are used.     

Photochemistry of 3-aryl-2-isoxazoline1

3-Phenyl-2-isoxazoline (1) was irradiated to give 4-phenyl-2-oxazoline (3), β-aminoaldehyde (14) and benzonitrile from its π-π^* singlet excited state. Several related derivatives afforded similar photoproducts on irradiation. The quantum yields of the photoreactions were dependent on the magnitudes of the singlet energies of the 2-isoxazolines. p-Cyanophenyl-2-isoxazoline (1c) formed a one-to-one photoadduct (22) with benzene.     

Fragmentation study of peptides using Fourier transform ion cyclotron resonance with infrared multiphoton dissociation: experiment and simulation

In this study, the fragmentation of gas-phase protonated Angiotensin II is investigated using electrospray ionization (ESI), Fourier-transform ion cyclotron resonance (FT-ICR), and mass spectrometry (MS) with a laser cleavage infrared multiphoton dissociation (IRMPD) technique. The experimental results show that the spectra peaks for the photoproducts are y2/b6- and y7-type ions, corresponding to the cleavage of His-Pro and Asp-Arg in the parent amino acid sequence. The fragmentation of the peptide under collision-free vacuum conditions is modeled using molecular dynamics simulations (MD). The binding energy for the peptide bonds (C'-N bond) of Angiotensin II is estimated from ab initio calculations. The calculations are directed at predicting experimental measurements of the product ions from the photodissociation of the peptide. The product distributions simulated by the MD dissociation trajectories include predominantly y7/b1 and y2/b6 pair ions.     

Thermodynamics of Solvation of 18-Crown-6 and Its Alkali-Metal Complexes in Various Solvents

Heats of solution of 1,4,7,10,13,16-hexaoxacyclooctadecane (18-crown-6) in acetonitrile, 1,2-dichloroethane, N,N-dimethylformamide, dimethyl sulfoxide, nitromethane, propylene carbonate, pyridine and water were measured at 25 °C and the enthalpies of the transfer of 18-crown-6 from waterto the aprotic solvents were derived. The thermodynamic quantities, G₁°, H₁° and T S₁°, for the formation of the[M(18-crown-6)]⁺ (M⁺ = Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) complexeswere determined by titration calorimetry in dimethyl sulfoxide containing0.1 mol dm^-3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25 °C. These thermodynamic quantities suggest that the complexationof 18-crown-6 with the alkali-metal ions mainly reflects the different solvationof 18-crown-6 and also the different degree of solvent structure.     

Bitterness evaluation of medicines for pediatric use by a taste sensor

The purpose of this study was to evaluate the bitterness of 18 different antibiotic and antiviral drug formulations, widely used to treat infectious diseases in children and infants, in human gustatory sensation tests and using an artificial taste sensor. Seven of the formulations were found to have a bitterness intensity exceeding 1.0 in gustatory sensation tests (evaluated against quinine as a standard) and were therefore assumed to have an unpleasant taste to children. The bitterness intensity scores of the medicines were examined using suspensions in water or an acidic sports drink. In the case of three macrolide antibiotic formulations containing erythromycin (ERYTHROCIN dry syrup), clarithromycin (CLARITH dry syrup for pediatric), and azithromycin (ZITHROMAC fine granules for pediatric use), the bitterness intensities of suspensions in acidic sports drinks were dramatically enhanced compared with the corresponding scores of suspensions in water. This enhancement could be predicted using the taste sensor. On the other hand, a reduction of bitterness intensity was observed for an acidic sports drink suspension of an amantadine product (SYMMETREL fine granules) compared with an aqueous suspension. This reduction in bitterness could also be predicted using the taste sensor output value. Thus, the taste sensor could predict whether or not suspension in an acidic sports drink would enhance or reduce the bitterness intensity of pediatric drug formulations, compared with suspensions in water.     

Monolithic octadecylsilyl-silica gel column for the high-speed ion chromatographic determination of acidity

A monolithic ODS-silica gel column modified by saturating it with lithium dodecylsulfate (Li-DS) was used to demonstrate the high-speed separation of H+ from other mono- and divalent cations, such as Na+, NH4+, K+, Mg2+ and Ca2+ using ion chromatography (IC). Using a 5 mM EDTA-2K solution containing 0.10 mM Li-DS (pH 4.80) as eluent, H+ was eluted with a sharp and symmetrical peak within 1.0 min before other cations at a flow-rate of 1.5 ml min(-1). The rapid elution of H+ and its conductimetric detection could be attributed to the presence of EDTA (HY2-), which can convert H+ ions as anions. i.e. H(+) + H2Y(2-) --> H3Y(-). The acidity of rainwater and deionized water samples was determined using this IC system with satisfactory results.     

Rh(I)-catalyzed Pauson-Khand reaction and cycloisomerization of allenynes: selective preparation of monocyclic, bicyclo[m.3.0], and bicyclo[5.2.0] ring systems

[reaction: see text] Rhodium(I)-catalyzed PKR of allenynes was found to be applicable for constructing azabicyclo[5.3.0]decadienone as well as oxabicyclo[5.3.0]decadienone frameworks. In addition, a reliable procedure for constructing a 10-monosubstituted bicyclo[5.3.0]deca-1,7-dien-9-one ring system by the rhodium(I)-catalyzed PKR of allenynes was developed under the condition of 10 atm of CO. Investigation of the rhodium(I)-catalyzed cycloisomerization of 4-phenylsulfonylnona-2,3-dien-8-ynes under nitrogen atmosphere gave the corresponding cyclohexene derivatives, whereas the C1-homologated allenynes produced cycloheptene derivatives and/or bicyclo[5.2.0]nonene skeletons depending on the substitution pattern at the allenic terminus. Thus, proper choice of the starting allenynes and reaction conditions led to the selective formation of 2-phenylsulfonylbicyclo[5.3.0]deca-1,7-dien-9-ones (Pauson-Khand-type product), 3-alkylidene-1-phenylsulfonyl-2-vinylcycloheptene derivatives, and bicyclo[5.2.0]nonene frameworks.     

Determination of monovalent inorganic anions in high-ionic-strength samples by electrostatic ion chromatography with suppressed conductometric detection

A new ion chromatographic (IC) system has been established by using micelles of 3-(N,N-dimethylmyristylammonio)propanesulfonate (Zwittergent 3-14) loaded onto a reversed-phase packed column as the separation column with an electronic rotary switching valve packed-bed suppressor for conductometric detection of inorganic anions. An aqueous H3BO3-Na2B4O7 solution has been demonstrated to be the most desirable eluent for this IC system. The relationship between retention time and the concentration of the borate eluent was determined for a series of model anionic analytes and this relationship was found to be opposite to that exhibited in a conventional anion-exchange IC system. The rapid elution and complete separation of monovalent inorganic anions were obtained by initially using a high-concentration borate solution as the eluent for a short-period, and then switching to a lower-concentration borate eluent to complete the separation. Detection limits for nitrite, bromide, nitrate, and chlorate were 0.85, 0.88, 0.95 and 4.8 microM, respectively, when a 7.0 mM Na2B4O7 eluent was used. Moreover, the ability to directly detect these monovalent anions in samples containing high concentrations of sulfate and/or chloride ions provided a major advantage of this approach.     

Preparation and characterization of carbonated barium-calcium hydroxyapatite solid solutions

Particles of carbonated barium-calcium hydroxyapatite solid solutions (BaCaHap) with different Ba/(Ba+Ca) (X(Ba)) atomic ratios were prepared by a wet method at 100 degrees C and characterized by various means. The crystal phases and structures of the products strongly depended on the composition of the starting solution, that is, the Ba/(Ba+Ca) atomic ratio ([X(Ba)]) and H3PO4 concentration ([H3PO4]) in the solution. BaCaHap with X(Ba)0.43 could be prepared at [X(Ba)]0.7 by changing [H3PO4], but could never be obtained at [X(Ba)]=0.8-0.95 regardless of [H3PO4]. The carbonated calcium hydroxyapatite particles prepared at [X(Ba)]=0 were fine and short rod-shaped particles (ca. 14x84 nm). With increasing [X(Ba)] from 0 to 0.8, the particles obtained became large spherical agglomerates. The carbonated barium hydroxyapatite particles formed at [X(Ba)]=1 were long rod-shaped agglomerates (ca. 0.2x2 microm) of fine primary particles. The amount of CO2 adsorbed irreversibly on a series of BaCaHaps showed a minimum at (Ba+Ca)/(P+C) atomic ratio of around 1.56, which agreed well with the minimum cation/P ratio obtained for the other hydroxyapatites, as already reported.