Immobilization of ultra-thin layer of monoclonal antibody on glass surface

When preparing an affinity column and a biosensor, it is desirable to immobilize a unimolecular layer of pure protein on a matrix. In this work, we tried to immobilize a monoclonal antibody on a surface of a glass test-tube as a model, to confirm the stability of this ultra-thin layer by an enzyme immunoassay, and to estimate the thickness of the layer on a slide glass by Fourier transform infrared reflection spectrometry. A new test-tube was washed and dried. The tube was filled with 5% 3-aminopropyltriethoxysilane. The 3-aminopropylsilylated surface was treated with glutaraldehyde and 5.6.10(-2) mg/ml solution of a normal mouse monoclonal antibody. The Schiff base between glutaraldehyde and the antibody was further reduced with 7.9.10(-3)% NaBH4. The tube was washed with 0.05% Tween 20 to block non-specific binding. The antibody immobilized on the surface was measured by an enzyme immunoassay based on a reaction of anti-mouse immunoglobulin G labelled with alkaline phosphatase, with which p-nitrophenol was produced from p-nitrophenylphosphate as a substrate. Meanwhile, various amounts of the antibody were immobilized on slide glasses in the same manner. The antibody on each surface was measured by Fourier transform infrared reflection spectrometry. The antibody immobilized under the final conditions was detectable by the enzyme immunoassay, and stable at 4 degrees C for ten days. The antibody on the slide glass was a unimolecular layer, as judged from the Fourier transform infrared spectra referred to -CONH- band semiquantitatively. Thus, we found the optimal conditions for immobilizing an ultra-thin layer of the monoclonal antibody on the glass surface.(ABSTRACT TRUNCATED AT 250 WORDS)     

An oxazaphospholidine approach for the stereocontrolled synthesis of oligonucleoside phosphorothioates

The stereocontrolled synthesis of oligodeoxyribonucleoside phosphorothioates (PS-ODNs) using nucleoside 3'-O-oxazaphospholidine derivatives as monomer units is described. 2-Chloro-1,3,2-oxazaphospholidine derivatives were prepared from six kinds of enantiopure 1,2-amino alcohols and used for the phosphitylation reactions of 5'-O-protected nucleosides. A detailed study of these reactions revealed that the diastereoselectivity of the reaction depended on the structure of the enantiopure 1,2-amino alcohol, the reaction temperature, and the amine used as a scavenger of HCl. In addition, ab initio molecular orbital calculations for the 2-chlorooxazaphospholidine derivatives were carried out to elucidate the mechanism of these diastereoselective phosphitylation reactions. The LUMO of the 2-chloro-5-phenyloxazaphospholidine derivatives on the phosphorus atom was found to be almost orthogonal to the P-Cl bond. This LUMO may be involved in the phosphitylation reactions with predominant retention of the P-configuration. A series of dialkyl(cyanomethyl)ammonium salts were developed and used as activators for the condensation reactions of the diastereopure nucleoside 3'-O-oxazaphospholidines with 3'-O-protected nucleosides. In the presence of the new activators, the reactions proceeded rapidly to give the corresponding dinucleoside phosphite triesters. The diastereoselectivity of the condensation reaction did not depend on the counteranion but on the structure of the dialkyl(cyanomethyl)amine. In the presence of the activator, which consists of a relatively small dialkyl(cyanomethyl)amine, the condensation proceeded with excellent diastereoselectivity. After sulfurization and deprotection, diastereopure (R(p))- and (S(p))-dinucleoside phosphorothioates were obtained in excellent yields. The present methodology was also applied to the solid-phase synthesis of stereoregulated PS-ODNs. all-(R(p))-[T(PS)](3)T, all-(S(p))-[T(PS)](3)T, all-(R(p))-d[G(PS)A(PS)C(PS)]T, and all-(R(p))-[T(PS)](9)T were synthesized on a highly cross-linked polystyrene resin.     

Diastereocontrolled synthesis of dinucleoside phosphorothioates using a novel class of activators, dialkyl(cyanomethyl)ammonium tetrafluoroborates

A novel class of activators, dialkyl(cyanomethyl)ammonium tetrafluoroborates 1a-c, has been developed and applied to the condensations of diastereopure 5'-O-tert-butyldiphenylsilylthymidine 3'-cyclic phosphoramidites 3a-d with 3'-O-tert-butyldimethylsilylthymidine (4a). Among them, the condensation of 3a with 4a in the presence of 1a completed within 5 min and gave only one diastereoisomer of the corresponding phosphite 5a. After sulfurization and deprtection, almost diastereopure (Rp)-TpsT 7 was obtained (d.r. = 99:1). Next the 5'-O-(DMTr)nucleoside 3'-phosphoramidites 8a-d containing thymine, N6-benzoyladenine, N4-benzoylcytosine, and N2-phenylacetylguanine have been synthesized and allowed to condense with 3'-O-protected thymidine and 2'-deoxyadenosine. The 5'-O-DMTr group and the N-acyl groups of the nucleobases were compatible with the reaction conditions and the condensations completed quickly with excellent diastereoselectivity.     

Determination of methylarsenic compounds in airborne particulate matter by gas chromatography with atomic absorption spectrometry

A sensitive method is described for the determination of mono-, di- and tri-methylarsenic compounds in airborne particulate matter by hydride-generation and gas-liquid chromatography with atomic absorption spectrometric detection. Interferences of various species are discussed. Absolute detection limits are 70, 80 and 100 pg As, respectively for the mono-, di- and tri-methylarsenic species. Recoveries of methylarsenic compounds added to airborne particulate matter are almost 100%. An iron/nitrate mixture interfered strongly but this was overcome by adding EDTA.     

Side chain-directed assembly of triangular molecular panels into a tetrahedron vs. open cone

Despite their structural similarity, triangular tetradentate ligands 2b and 2c experience different assembly pathways on complexation with (en)Pd(NO3)2 to give M8L4 tetrahedral (3) and open cone (4) structures, respectively, due to steric restriction by side chains at the corner or on the edge of the ligands.     

Rational design of CH/pi interaction sites in a basic resolving agent

A novel synthetic basic resolving agent, cis-1-aminobenz[f]indan-2-ol (ABI), was rationally designed by introducing effective CH/pi interaction sites to cis-1-aminoindan-2-ol (AI), whose chiral recognition ability has been reported from our laboratory. ABI was applicable to a wide variety of racemic arylalkanoic acids and showed moderate to excellent chiral recognition ability, which was obviously higher than that of AI. The fundamental and important role of CH/pi interactions, such as tunable CH(sp(2))/pi and CH(sp(3))/pi interactions, in the chiral recognition by ABI was revealed by X-ray crystallographic study.     

Vacancy ion-exclusion chromatography of aromatic carboxylic acids on a weakly acidic cation-exchange resin

Determination of aromatic carboxylic acids by conventional ion-exclusion chromatography is relatively difficult and methods generally rely on hydrophobic interaction between the solute and the resin. To overcome the difficulties in determining aromatic carboxylic acids a new approach is presented, termed vacancy ion-exclusion chromatography, which is based on use of the sample as mobile phase and an injection of aqueous 10% methanol onto a weakly acidic cation-exchange column (TSKgel OApak-A). Highly sensitive conductivity detection occurred with sharp and well-shaped peaks, leading to very efficient separations. The effects of sulfuric acid concentration added to the mobile phase, flow-rate, and column temperature on the retention volume of tested aromatic carboxylic acids was investigated. Retention times were found to be affected by the concentration of the analytes in the mobile phase and to some extent also by the addition of an organic modifier such as methanol to the injected water sample. Separation of sulfuric acid (SA), naphthalenetetracarboxylic acid (NTCA), phthalic acid (PA) and benzoic acid (BA) was satisfactory using this new approach. Detection limits were 0.66, 0.67, 0.42 and 0.86 microM and detector responses were linear in the range 1-100, 1-80, 2.5-100 and 10-40 microM, for SA, NTCA, PA and BA, respectively. Precision for retention times was 0.36% and for peak areas was 1.5%.     

Finding of remarkable synergistic effect on the aroxyl-radical-scavenging rates under the coexistence of α-tocopherol and catechins

Measurements of aroxyl radical (ArO^•)-scavenging rate constants () of antioxidants (AOHs) (α-tocopherol (α-TocH) and three catechins (CatHs) (ie, epicatechin (EC), epigallocatechin (EGC), and epigallocatechin gallate (EGCG)) were performed in ethanol solution, using stopped-flow spectrophotometry. values were measured not only for each AOH, but also for the mixtures of two AOHs (α-TocH and CatH). A notable synergistic effect that the value of α-TocH increases 1.29, 1.84, and 1.65 times under the coexistence of constant concentrations of EC, EGC, and EGCG, respectively, was observed for the solutions including α-TocH and CatH. Similarly, values of CatHs (EC, EGC, and EGCG) increased 1.72, 2.25, and 2.34 times under the coexistence of constant concentrations of α-TocH, respectively. UV-Vis absorption of α-tocopheroxyl radical (α-Toc^•) (λ_max = 428 nm), which had been produced by reaction of α-TocH with ArO^•, decreased remarkably under the coexistence of α-TocH and CatHs due to the fast α-TocH-regeneration reaction by CatHs. The result suggests that the prooxidant reaction due to α-Toc^• is suppressed by the coexistence of CatHs. By analyzing the formation and decay curves of α-Toc^•, it has been ascertained that one molecule of EGCG having three OH groups at B-ring may rapidly regenerate three molecules of α-Toc^• to α-TocH.     

Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.     

Thermodynamic analysis of duplex formation of the heterochiral DNA with L-deoxyadenosine.

An L-DNA, the mirror-image isomer of natural DNA, has extraordinary nuclease resistance, and thus the molecules should be promising reagents for many applications, such as antisense technology. However, little is known about the structural and thermodynamic properties of DNAs with this modified nucleotide. In this study, we prepared the L-nucleotide (L-dA) and introduced it into oligodeoxyribonucleotides to assess the ability of the L-nucleotide as a functional molecule for many applications based on the DNA hybridization. Two decamers with an L-dA at the center were synthesized and duplexes with the complementary DNA strand were applied to structural and thermodynamic analyses. The structural study by CD spectra showed that the structures of both modified "L/D-D" duplexes were the typical B-form. This result suggests that the global structure of DNA was not collapsed by the introduction of an L-DNA. Thermodynamic parameters (deltaH degrees, deltaS degrees, and deltaG degrees 37) of the duplex formation, determined by UV melting experiments, indicated that the both duplexes were destabilized at about 2.5 to 3.0 kcal mol(-1) by the introduced L-dA, mainly due to an unfavorable enthalpic effect. In conjunction with information by other researchers, these results suggest that the L-DNA affect on the duplex structure and the stability vary locally; thus, the thermodynamic stability of modified L/D-D duplexes should be predictable by the nearest-neighbor thermodynamic parameters.