Elongation and contraction of molecular springs. Synthesis, structures, and properties of bridged [7]thiaheterohelicenes

A series of bridged [7]thiaheterohelicenes 3a-c and 4 with a variety of helical pitches have been prepared from racemic and optical pure 2,13-bis(hydroxymethyl)dithieno[3,2-e:3',2'-e']benzo[1,2-b:4,3-b']bis[1]benzothiophene (1) in order to investigate the helical structures in solution. Recrystallizations of (PM)-3a, (PM)-3b, (PM)-3c, and (P)-4 from hexane-dichloromethane gave crystals suitable for X-ray crystallography, while recrystallization of (PM)-4 with benzene gave an inclusion complex with a stoichiometry of (PM-4)(4).(C(6)H(6)). X-ray analyses of (PM)-3a-c, (PM-4)(4).(C(6)H(6)), and (P)-4 indicate that the dihedral angles between terminal thiophene rings of the helical framework significantly vary from 22 degrees for 4 to 59 degrees for 3c. This represents as increase of 37 degrees or 168%. Although the (13)C NMR and UV absorption spectra of bridged helicenes 3a-c and unbridged helicene 5 are essentially the same, the molar rotation of 5 is very large compared with those of 3a-c and 4. A red shift (15 nm) in the circular dichroism (CD) spectrum is observed for 4, suggesting that this compound is more planar than 3a-c in solution. In the series of [7]thiaheterohelicenes studied, the minimum helical pitch is 2.70 A for 4.     

Enzymatic Synthesis and Polymerization of Cyclic Trimethylene Carbonate Monomer with/without Methyl Substituent

The direct enzymatic synthesis of a cyclic trimethylene carbonate (1,3‐dioxane‐2‐one) monomer with/without a methyl substituent was carried out using dimethyl or diethyl carbonate and 1,3‐diol with the objective of producing aliphatic poly(trimethylene carbonate), a typical biodegradable synthetic plastic. The lipase‐catalyzed condensation of dimethyl or diethyl carbonate with aliphatic 1,3‐diols using immobilized Candida antarctica lipase (lipase CA) in an organic solvent at 70 °C afforded the corresponding methyl‐substituted and unsubstituted cyclic trimethylene carbonates. The cyclic trimethylene carbonates obtained by the reaction of dimethyl or diethyl carbonates with 1,3‐propanediol and 2‐methyl‐1,3‐propanediol were polymerized by lipase to produce the corresponding polycarbonates.

Total TMC yield as a function of the reaction time.     

Polarized near-edge x-ray-absorption fine structure spectroscopy of C60-functionalized 11-amino-1-undecane thiol self-assembled monolayer: molecular orientation and evidence for C60 aggregation

Near-edge x-ray-absorption fine structure (NEXAFS) spectroscopy was adopted to probe the unoccupied electronic states of C60 anchored onto an organized assembly of 11-amino-1-undecane thiol on Au(111). The polarization dependence of the intensity of pi* resonance associated with C60 pi network revealed the self-assembled monolayer (SAM) system to be oriented with an average molecular tilt angle of 57 degrees with respect to the surface normal. Invoking the absence of solid-state band dispersion effects and in comparison to solid C60 and /or 1-ML C60/Au(111), the electronic structure of the resulting assembly was found dominated by spectral position shift and linewidth and intensity changes of the lowest unoccupied molecular orbital (LUMO), LUMO+1, and LUMO+2 orbitals. The latter implied hybridization between N Pz of -NH2 group of thiolate SAM and pi levels of C60, resulting in a nucleophilic addition with a change in the symmetry of C60 from Ih to C1 in the SAM. Occurrence of a new feature at 285.3 eV in the NEXAFS spectrum, assigned previously to pi* graphitic LUMO, signified the formation of aggregated clusters, (C60)n of C60 monomer. Low tunneling current scanning tunneling microscopy confirmed them to be spherical and stable aggregates with n approximately 5.     

Characterization of chemiluminescence from singlet oxygen under laminar flow conditions in a micro-channel and its quenching with beverages

Singlet oxygen was generated by reaction of sodium hypochlorite and hydrogen peroxide in a micro-channel. The two reagent solutions were delivered into the micro-channel by a syringe pump, providing a laminar flow liquid-liquid interface. The chemiluminescence from the singlet oxygen was emitted in the collapse of the interface due to molecular diffusion under laminar flow conditions. The chemiluminescence intensity was observed continuously and stably for each combination of reagents fed into the micro-channel; while, in the normal batch-type reactor the chemiluminescence peaks from singlet oxygen were observed within ca. 5 s. The features of the chemiluminescence emitted under laminar flow conditions were examined by changing the concentrations of sodium hypochlorite and hydrogen peroxide; the concentrations of 2.5 mM sodium hypochlorite and 7.5 mM hydrogen peroxide provided highest chemiluminescence intensities without bubble formation. Also, the effects of beverages, such as green tea, coffee, white wine, red wine, and sake (rice wine), on the chemiluminescence intensity as well as the concentrations of sodium hypochlorite and hydrogen peroxide were examined. The chemiluminescence intensities observed with addition of the beverages to the reagents decreased in the following orders; green tea > coffee > red wine > rice wine > white wine (being added to sodium hypochlorite); coffee > white wine > green tea > red wine > rice wine (being added to hydrogen peroxide). It was found that coffee decreased the chemiluminescence intensity (ca. 33% chemiluminescence decrease) without altering the concentrations of sodium hypochlorite or hydrogen peroxide. The cause of the decrease in chemiluminescence with coffee is discussed.     

Evaluation of the radioactivity in concrete from accelerator facilities

For evaluation of radioactivity induced in the concrete samples from accelerator facilities, the residual radioactivity in concrete sample, collected from seven accelerator facilities, was determined by γ-ray spectrometry. The tritium was extracted by the heating method using an IR furnace, and measured with a liquid scintillation counter. It was found that the major radioisotopes activated mainly by neutrons in the concrete samples were ¹⁵²Eu, ⁶⁰Co, ¹³⁴Cs and ³H. The concentrations of radioactivities induced by thermal neutron capture are the highest at a depth of 10 cm in the concrete wall. The correlation between tritium, ⁶⁰Co and ¹⁵²Eu activity was investigated by measuring many concrete samples for seven accelerator facilities. The results indicate that their activities are strongly correlated with each other. So it would also be concluded that the total activity in shielding concrete could be estimated on the basis of the activities of ⁶⁰Co and ¹⁵²Eu.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.     

An oxazaphospholidine approach for the stereocontrolled synthesis of oligonucleoside phosphorothioates

The stereocontrolled synthesis of oligodeoxyribonucleoside phosphorothioates (PS-ODNs) using nucleoside 3'-O-oxazaphospholidine derivatives as monomer units is described. 2-Chloro-1,3,2-oxazaphospholidine derivatives were prepared from six kinds of enantiopure 1,2-amino alcohols and used for the phosphitylation reactions of 5'-O-protected nucleosides. A detailed study of these reactions revealed that the diastereoselectivity of the reaction depended on the structure of the enantiopure 1,2-amino alcohol, the reaction temperature, and the amine used as a scavenger of HCl. In addition, ab initio molecular orbital calculations for the 2-chlorooxazaphospholidine derivatives were carried out to elucidate the mechanism of these diastereoselective phosphitylation reactions. The LUMO of the 2-chloro-5-phenyloxazaphospholidine derivatives on the phosphorus atom was found to be almost orthogonal to the P-Cl bond. This LUMO may be involved in the phosphitylation reactions with predominant retention of the P-configuration. A series of dialkyl(cyanomethyl)ammonium salts were developed and used as activators for the condensation reactions of the diastereopure nucleoside 3'-O-oxazaphospholidines with 3'-O-protected nucleosides. In the presence of the new activators, the reactions proceeded rapidly to give the corresponding dinucleoside phosphite triesters. The diastereoselectivity of the condensation reaction did not depend on the counteranion but on the structure of the dialkyl(cyanomethyl)amine. In the presence of the activator, which consists of a relatively small dialkyl(cyanomethyl)amine, the condensation proceeded with excellent diastereoselectivity. After sulfurization and deprotection, diastereopure (R(p))- and (S(p))-dinucleoside phosphorothioates were obtained in excellent yields. The present methodology was also applied to the solid-phase synthesis of stereoregulated PS-ODNs. all-(R(p))-[T(PS)](3)T, all-(S(p))-[T(PS)](3)T, all-(R(p))-d[G(PS)A(PS)C(PS)]T, and all-(R(p))-[T(PS)](9)T were synthesized on a highly cross-linked polystyrene resin.