Selective hydrogen peroxide oxidation of sulfides to sulfoxides or sulfones with MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions

Selective oxidation of sulfides to sulfoxides and sulfones with hydrogen peroxide under organic solvent-free conditions was demonstrated by the MWW-type titanosilicate zeolite catalyst. Sulfides were oxidized smoothly to give sulfoxides with good selectivities at ambient temperature using 1.0–1.2 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst. Especially, the Ti-MWW with an interlayer-expanded structure (Ti-IEZ-MWW) catalyst showed high activity with good chemoselectivity for the oxidation of various sulfides. The catalyst is recyclable for at least five cycles, and the only byproduct is water. Sulfides were directly oxidized to give sulfones in high yields by 2.5 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions.     

57Fe-Mössbauer study of electrically conductive alkaline iron vanadate glasses

A relationship between local structure, thermal stability and electrical conductivity (σ) of xR₂O·10Fe₂O₃·(90 ? x)V₂O₅ glasses (abbreviated as xRFV glasses, where R = Li, Na, K; x = 20 and 40 in mol %) was investigated by ⁵⁷Fe-Mössbauer spectroscopy, X-ray diffractometry, differential thermal analysis (DTA) and DC two- and four-probe method. From DTA study, thermal stability of 20RFV glasses is lower than that of 40RFV glasses by evaluating Hruby parameter (K _gl). Constant activation energy for crystallization (E _a) of 2.5 eV obtained from both 20RFV and 40RFV glasses indicate that the crystallization proceeds with the cleavage of Fe–O bond having the energy of 2.6 eV. Isochronally annealed 20RFV glass at 400–450 °C resulted in the increase in electrical conductivity (σ) from the order of 10^?3 to 10^?1 S cm^?1, whereas slight decrease in σ was observed for 20RFV glass annealed above 460 °C. A paramagnetic doublet with an identical isomer shift (δ) of 0.39 mm s^?1 was observed in the ⁵⁷Fe-Mössbauer spectra of 20RFV glass after isothermal annealing conducted at 400–450 °C for 100 min, which caused a decrease of quadruple splitting (Δ) from 0.67 to 0.52 mm s^?1 for 20LiFV glass and from 0.66 to 0.53 mm s^?1 for 20NaFV glass. On the other hand, three paramagnetic doublets with δ and Δ of 0.40 and 0.25, 0.38 and 0.60, and 0.31 and 1.11 mm s^?1 respectively were observed for 20RFV glass annealed at 460–550 °C, reflecting precipitation of semiconducting FeVO₄ phase having σ of 6.0 × 10^?7 S cm^?1. It can be concluded that isochronal annealing of 20RFV glass below 450 °C resulted in increase in σ due to the structural relaxation, while annealing above 500 °C resulted in the decrease of σ due to the precipitation of FeVO₄ phase.     

Snapshot Mueller matrix spectropolarimeter

We present a new snapshot technique for performing spectrally resolved Mueller matrix polarimetry. The basic approach is an extension of the channeled spectropolarimetry technique, employing frequency-domain interferometry to encode polarization information into modulation of the spectrum.     

The Impact of C2 Insertion into a Carbazole Donor on the Physicochemical Properties of Dibenzo[a,j]phenazine-Cored Donor–Acceptor–Donor Triads

Novel electron donor–acceptor–donor (D-A-D) compounds comprising dibenzo[a,j]phenazine as the central acceptor core and two 7-membered diarylamines (iminodibenzyl and iminostilbene) as the donors have been designed and synthesized. Investigation of their physicochemical properties revealed the impact of C₂ insertion into well-known carbazole electron donors on the properties of previously reported twisted dibenzo[a,j]phenazine-core D-A-D triads. Slight structural modification caused a drastic change in conformational preference, allowing unique photophysical behavior of dual emission derived from room-temperature phosphorescence and triplet–triplet annihilation. Furthermore, electrochemical analysis suggested sigma-dimer formation and electrochemical polymerization on the electrode. Quantum chemical calculations also rationalized the experimental results.     

Selective decomposition of proteins by photocatalytic Ti(IV)-doped calcium hydroxyapatite particles from mixed-protein systems

The decomposition of protein molecules from a mixed-protein solution on the surface of calcium hydroxyapatite (CaHap) and Ti(IV)-doped CaHap (TiHap) particles with a Ti/(Ca + Ti) atomic ratio (X _Ti) of 0.10 and 0.20 under UV irradiation of 365 nm in wavelength was investigated. Acidic bovine serum albumin (BSA) and basic lysozyme (LSZ) were employed as a model of pathogenic proteins. The photocatalytic activities of TiHap particles were estimated from the decomposition of BSA and LSZ from the BSA (2.5 mg/cm³)–LSZ(1.0 mg/cm³) mixture under 1 mW/cm² UV irradiation dispersed in a 10-mL quartz tube. No change in BSA concentration by UV irradiation was observed for all the unheated original CaHap and TiHap particles without and with low photocatalytic activities, respectively. Similar results were observed for the systems that employed heat-treated particles endowed a high photocatalytic activity by heat treatment at 650 °C for 1 h. On the other hand, a selective photocatalytic decomposition was observed for the LSZ, i.e., only LSZ molecules were decomposed completely from the BSA (2.5 mg/cm³)–LSZ(1.0 mg/cm³) mixture by using heat-treated TiHap particles with X _Ti?=?0.10 and 0.20. This selective decomposition by TiHap particles was interpreted by higher adsorption affinity of positively charged LSZ to highly negatively charged TiHap together with low molecular weight and rigid structure of LSZ molecules.     

Continuous Synthesis of Aryl Amines from Phenols Utilizing Integrated Packed-Bed Flow Systems

Aryl amines are important pharmaceutical intermediates among other numerous applications. Herein, an environmentally benign route and novel approach to aryl amine synthesis using dehydrative amination of phenols with amines and styrene under continuous-flow conditions was developed. Inexpensive and readily available phenols were efficiently converted into the corresponding aryl amines, with small amounts of easily removable co-products (i.e., H₂O and alkanes), in multistep continuous-flow reactors in the presence of heterogeneous Pd catalysts. The high product selectivity and functional-group tolerance of this method allowed aryl amines with diverse functional groups to be selectively obtained in high yields over a continuous operation time of one week.     

Phospholipid Polymer Hydrogel Matrices with Dually Immobilized Cytokines for Accelerating Secretion of the Extracellular Matrix by Encapsulated Cells

Construction of 3D tissues by various types of cells with specific characteristics is an important and fundamental technology in tissue reconstruction medicine and animal‐free diagnosis system. To do so, an excellent extracellular matrix (ECM) is needed for encapsulation of cells and maintaining cell activity. Spontaneously forming hydrogel matrix is used by complexation between two water‐soluble polymers, 2‐methacryloyloxyethyl phosphorylcholine polymer bearing phenylboronic acid groups and poly(vinyl alcohol). Two cytokines for cell proliferation are immobilized in the hydrogel matrix to control the activities of the encapsulated cells. The cytokine‐immobilized hydrogel matrix can encapsulate both L929 fibroblasts and normal human dermal fibroblasts under mild condition. The physical properties of the hydrogel matrix can follow the proliferation process of the encapsulated cells. The encapsulated cells secrete ECM in the polymer hydrogel networks upon 3D culturing for 7 days. Consequently, the tissue‐mimicking ECM hybrid hydrogels are fabricated successfully.