Synthesis, reactivity, and properties of N-fused porphyrin manganese(I) tricarbonyl complexes

The reactions of N-fused tetraphenylporphyrin (NFTPP, 1a) and its 21-substituted derivatives, 21-Br-NFTPP (1b), 21-NO(2)-NFTPP (1c), and 21-Bz-NFTPP (1d), with Mn(CO)(5)Br gave the manganese(I) tricarbonyl complexes bearing N-fused tetraphenylporphyrinato ligands (2a-d), respectively, in 46-99% yields. The complexes were characterized by mass, IR, (1)H and (13)C NMR spectroscopy, and the final structural proof was evident from the X-ray crystallographic analysis for 2a. The crystals of 2a·CH(2)Cl(2) belong to the monoclinic space group P2(1)/n (#14), with a = 15.007(2) ?, b = 12.5455(19) ?, c = 21.150(3) ?, β = 102.227(4)°, and Z = 4. The lengths (?) of three manganese-nitrogen and three manganese-carbon bonds are inequivalent respectively [Mn-N(2), 2.007(2); Mn-N(23), 2.033(2); Mn-N(24), 1.988(3); and Mn-CO, 1.798(4), 1.804(4), 1.841(3)], reflecting the asymmetric structure of the NFp ligand. The aromatic substitution reactions of 2a, such as nitration, formylation, and chlorination, proceeded without a loss of center metal to give the corresponding 21-nitro (2c), 21-formyl (2e), and 21-chloro (2f) derivatives, regioselectively. In the electrochemical measurements of 2, one reversible oxidation and two reversible reduction waves were observed. The redox potentials of 2 indicate the narrow energy gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO-LUMO) being consistent with the electronic absorption spectra that display the absorption edges over 1000 nm. Protonation occurred at the inner core nitrogen of 2a upon the addition of acids, which is inferred from the (1)H NMR spectra as well as theoretical calculations. By a treatment with amine N-oxides, demetalation of 2 proceeded to afford the corresponding NFP free-bases (1).     

Antioxidant activity and Neurite outgrowth-enhancing activity of scorbamic acid and a red pigment derived from ascorbic acid

Abstract

L-Ascorbic acid (AA), known as vitamin C, can form browning products by a non-enzymatic process during storage and the browning products cause deterioration of agricultural products. In the browning reaction, a red pigment, 2,2´-nitrilodi-2(2´)-deoxy-L-ascorbic acid ammonium salt (NDA), is generated from AA via L-scorbamic acid (SCA) as an intermediate. However, the biological activities of SCA and NDA have not yet been clarified. In this study, we assayed the antioxidant activities of SCA and NDA using ABTS radical cation and their neurite outgrowth-enhancing activities in PC12 cells. SCA showed stronger radical-scavenging activity than that of AA, while NDA hardly showed any activity. SCA and NDA enhanced the neurite outgrowth induced by dibutyryl cyclic AMP after their incorporation into cells in the same manner as that of AA. The results indicated that SCA has antioxidant activity and that SCA and NDA have neurite outgrowth-enhancing activity.     

Projection of Si 1s photoexcited orbitals into resonant Auger electron spectra in KLL decays of Si(CH3)4 and SiF4

Spectator resonant KL(23)L(23) Auger electron spectra have been measured in the Si 1s photoexcitation region of Si(CH(3))(4) using monochromatized undulator radiation combined with a hemispherical electron spectrometer. The broad peak with high intensity in a total ion yield spectrum, coming mainly from excitation of a 1s electron into the 6t(2) vacant orbital, induces a spectator Auger decay in which the excited electron remains in its excited orbital. The component on the higher energy side of this peak through 1s excitation into a Rydberg orbital produces resonant Auger decays in which the excited Rydberg electron moves into a slightly higher Rydberg orbital, or is partly shaken up to a significantly higher Rydberg orbital. These findings of Si(CH(3))(4) indicate a clear contrast to those for SiF(4), in which the 1s excitation into a Rydberg orbital induces a shake-down phenomenon as well as a shake-up one. The results of these molecules exhibit a clear splitting effect among excited orbitals which are smeared out by overlapping due to lifetime widths and due to densely populated levels in the 1s electron excitation spectrum. This is consistent with the calculation on photoexcitation within the framework of density functional theory.     

Distribution and behavior of long-lived radioiodine in soil

The concentration of¹²⁹I in soil in Japan was determined by neutron activation analysis. For the activation analysis, pre-irradiation chemical separation of the iodine was carried out by acid decomposition and distillation and post-irradiation treatment was performed by ion exchange and solvent extraction. The concentration of stable iodine and¹³⁷Cs were also determined and compared with the behavior of¹²⁹I in soil.Soil samples from Ibaraki, Fukui, Fukushima, and Nagasaki Prefectures were analyzed and¹²⁹I was detected in amounts ranging from 10^–7 to 10^–5 Bq/g soil in uncultivated surface soil. There are apparently small variations in the¹²⁹I concentrations in each of the regions analyzed.From depth profile studies in sandy soil, the iodide form of¹²⁹I was found to migrate downward at a relatively rapid rate while other species remain longer in the surface soil.     

Facile deposition of [60]fullerene and carbon nanotubes on ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene

It was found that [60]fullerene encapsulated in p-sulfonatocalix[8]arene and single-walled carbon nanotubes (SWNTs) solubilized by sodium dodecylsulfate can be readily deposited on the ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene (EDOT) without chemical modification of these carbon clusters. The driving force for the deposition is an electrostatic interaction between the anionic complexes and the cationic charges of poly(EDOT) formed in the oxidative polymerization process. The surface morphology was thoroughly characterized by scanning electron micrograph: the [60]fullerene/poly(EDOT) film is covered by nano-particles with 20-100 nm diameters whereas the SWNTs/poly(EDOT) film is covered by nanorods with several microm length and ca. 100 nm diameter. The results indicate that the anionic complexes act as nuclei for the polymer growth in the oxidation polymerization. Interestingly, when these modified ITO electrodes were photoirradiated, the appearance of a photocurrent wave was observed. The action spectra showed that the photoexcited energy of [60]fullerene or SWNTs is efficiently collected by the electroconductive poly(EDOT) film and transferred to the ITO electrode.     

New synthetic method for orsellic acid type macrolides by intramolecular alkylation of protected cyanohydrin. The synthesis of (±)-zearalenone.

Zearalenone was synthesized by a general cyclization method of orsellic acid type macrolides having ketone moiety using the intramolecular alkylation of the protected cyanohydrin. This alkylation tolerates the presence of ester group and requires short reaction time.     

Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

Enhancement of Solar Hydrogen Evolution from Water by Surface Modification with CdS and TiO2 on Porous CuInS2 Photocathodes Prepared by an Electrodeposition–Sulfurization Method

Porous films of p‐type CuInS₂, prepared by sulfurization of electrodeposited metals, are surface‐modified with thin layers of CdS and TiO₂. This specific porous electrode evolved H₂ from photoelectrochemical water reduction under simulated sunlight. Modification with thin n‐type CdS and TiO₂ layers significantly increased the cathodic photocurrent and onset potential through the formation of a p–n junction on the surface. The modified photocathodes showed a relatively high efficiency and stable H₂ production under the present reaction conditions.     

Catalytic activity and regeneration property of a Pd nanoparticle encapsulated in a hollow porous carbon sphere for aerobic alcohol oxidation

A core-shell composite consisting of a palladium (Pd) nanoparticle and a hollow carbon shell (Pd@hmC) was employed as a catalyst for aerobic oxidation of various alcohols. The core-shell structure was synthesized by consecutive coatings of Pd nanoparticles with siliceous and carbon layers followed by removal of the intermediate siliceous layer. Structural characterizations using TEM and N(2) adsorption-desorption measurements revealed that Pd@hmC thus-obtained was composed of a Pd nanoparticle core of 3-6 nm in diameter and a hollow carbon shell with well-developed mesopore (ca. 2.5 nm in diameter) and micropore (ca. 0.4-0.8 nm in diameter) systems. When compared to some Pd-supported carbons, Pd@hmC showed a high level of catalytic activity for oxidation of benzyl alcohol into benzaldehyde using atmospheric pressure of O(2) as an oxidant. The Pd@hmC composite also exhibited a high level of catalytic activity for aerobic oxidations of other primary benzylic and allylic alcohols into corresponding aldehydes. The presence of a well-developed pore system in the lateral carbon shell enabled efficient diffusion of both substrates and products to reach the central Pd nanoparticles, leading to such high catalytic activities. This core-shell structure also provided high thermal stability of Pd nanoparticles toward coalescence and/or aggregation due to the physical isolation of each Pd nanoparticle from neighboring particles by the carbon shell: this specific property of Pd@hmC resulted in possible regeneration of catalytic activity for these aerobic oxidations by a high-temperature heat treatment of the sample recovered after catalytic reactions.     

Selectivity in substrate–enzyme complexation studied by surface forces measurement

The selectivity of substrate in substrate–enzyme complexation of heptaprenyl diphosphate synthase was directly investigated using colloidal probe atomic force microscopy (AFM). This enzyme is composed of two dissociable subunits, which exhibits a catalytic activity only when they are associated together in the presence of a cofactor, Mg²⁺, and a substrate, farnesyl diphosphate (FPP). We have recently succeeded to directly demonstrate a specific interaction involved in this enzyme reaction and obtain new insights into the molecular mechanism of the reaction using the approach based on the colloidal probe AFM. The AFM measurement showed the adhesive force between the subunits only in the presence of both Mg²⁺ and FPP. In this study, we studied the substrate selectivity in the complexation by monitoring the adhesive force. The substrates studied are pyrophosphate (PPi), isopentenyl diphosphate (IPP), geranyl diphosphate (GPP), farnesyl monophosphate (FP), and farnesyl geranyl diphosphate (FGPP). No adhesion was observed in the case of PPi, IPP, and GPP. On the other hand, the significant adhesion was observed for phosphate derivatives, which bear prenyl units longer than three. This is in good agreement with the selectivity of the substrates by this enzyme, which catalyzes the condensation reaction of four IPP molecules with FPP to give heptaprenyl (C₃₅) diphosphates. Our study showed a useful methodology for examining the elemental processes of biological reactions.