Measurements of Room-Temperature Phosphorescence Spectra of Polycyclic Aromatic Compounds Using Pullulan Films Containing β-Cyclodextrin and 2-Bromoethanol

A clear film was easily prepared by air-drying anaqueous solution of pullulan (6%w/w) containing -cyclodextrin(CD, 1%w/w) and 2-bromoethanol (1%v/w). The resultingpullulan film was used as a substrate for simple measurements ofroom-temperature phosphorescence (RTP) spectra of polycyclicaromatic compounds (PACs). Only a drop (ca. 10 L) of a 100 gmL^-1 sample solution in 95% ethanol was spotted onto the surfaceof the disk film (7–8 mm diameter) and the solvent wasallowed to evaporate at room temperature. The sample-spottedfilm was pasted on a glass plate (75 × 20 × 1 mm) with smallamounts of a starch glue. The plate was mounted into a solidsample holder, or alternatively inserted diagonally into a 1-cm cell holder.Without a dry gas flush during the measurements, RTPspectra based on the CD inclusion complexes of PACs wereobtained from six typical two- and three-ring compounds,including naphthalene, acenaphthene, fluorene, phenanthrene,carbazole, and dibenzofuran. Only anthracene did notproduce a discernable phosphorescence signal by the presenttechnique. This technique was directly applied to the spectralidentification of acenaphthene in commercially available kerosene.     

Rapid determination of nitroimidazole residues in honey by liquid chromatography/tandem mass spectrometry

We developed a rapid and efficient means of determining residues of four nitroimidazoles-i.e., dimetridazole, ipronidazole, metronidazole, and ronidazole-and three hydrophilic metabolites- i.e., 2-hydroxymethyl-1-methyl-5-nitroimidazole, 1 -methyl-2-(2'-hydroxyisopropyl)-5-nitroimidazole, and 1-(2-hydroxyethyl)-2-hydroxymethyl-nitroimidazole--in honey. We applied a QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) procedure improved to suit a nitroimidazole analysis, which is fast (approximately 30 min) and uses less organic solvent. The procedure involves initial single-phase extraction of 5 g of honey with acetonitrile containing 1% acetic acid, followed by liquid-liquid partitioning involving the addition of 5 g sodium chloride, 1.5 g trisodium citrate dihydrate, and 4 g magnesium sulfate. Moreover, matrix from honey was reduced by an SPE method with an alumina-N cartridge. The samples were analyzed using LC/MS/MS. Chromatographic separation of these nitroimidazoles and metabolites was performed in the gradient mode on a pentafluorophenylpropyl-bonded silica column (150x2.0 mm, 3 pm particle size) at 40 degrees C. The mobile phase consisted of a 0.01% acetic acid solution and acetonitrile, and the flow rate was 0.2 mL/min. The method was validated using honey spiked with these nitroimidazoles from 0.1 to 0.5 microg/kg. The overall recovery of the seven nitroimidazoles ranged from 76.1 to 98.5%; intra- and interassay CV values were <9.5 and <14.2%, respectively. The LOQ ranged from 0.1 to 0.5 microg/kg. LC/MS/MS coupled with the QuEChERS method showed good potential as a method for determining nitroimidazole residues in honey.     

A new convenient method for the synthesis of [2-C]thymine utilizing [C]phosgene

β-(N-Benzoylamino)methacrylamide, a key intermediate for the preparation of [2-¹¹C]thymine, was synthesized in three steps from ethyl α-formylpropionate and NH₃. Reaction of the alkali metal salts of β-(N-benzoylamino)methacrylamide with [¹¹C]phosgene gave [2-¹¹C]thymine. The yield of [2-¹¹C]thymine was 362 ± 53 MBq at EOS (n = 3) (18 MeV proton beam; 10 μA, 10 min). The total synthesis was accomplished in just 16 min from the end of bombardment.     

Total synthesis of spicamycin

The first total synthesis of one of the spicamycin congeners, SPM VIII (3), is described. A preliminary model study for construction of the characteristic N-glycoside linkage in spicamycin using tetra-O-benzyl-beta-D-mannopyranosylamine (13) and halopurines 5 revealed that Pd-catalyzed conditions successfully provided the coupling products 14 and 15 in good yields. It was also shown that thermal anomerization of the N-glycosides easily occurred, which resulted in the predominant formation of the beta-anomer as the thermodynamically favored compound, and the activation energy of anomerization of 15 was estimated to be ca. 30 kcal/mol. The novel aminoheptose unit of spicamycin 6 was prepared stereoselectively by carbon elongation of an acyclic aldehyde, prepared by ring cleavage reaction of a highly functionalized cyclohexane derived from naturally abundant myo-inositol. The Pd-catalyzed coupling reaction of the beta-heptopyranosylamine 6 with protected 6-chloropurine 5d, followed by deprotection, provided spicamycin amino nucleoside 2, whose condensation with dodecanoylglycine completed the total synthesis of 3. This study confirmed the proposed unique structure of a novel nucleoside antibiotic.     

Surface induced hydrogen-bonded macrocluster formation of methanol on silica surfaces

Recently, we have succeeded in identifying the structure of the adsorption layer of ethanol on a silica surface in cyclohexane to be a hydrogen-bonded linear aggregate (polymer), which we call a surface molecular macrocluster. In this work, we studied the effect of the miscibility of liquids on the formation of the surface molecular macroclusters for confirming that this is a surface induced phenomenon. We investigated the interaction and the structure of methanol adsorbed on a silica surface in methanol-cyclohexane binary liquids by a combination of colloidal probe atomic force microscopy, adsorption excess isotherm measurement, and FTIR spectroscopy using the attenuated total reflection (ATR) mode, and compared the results with those of the ethanol-cyclohexane and 1-propanol-cyclohexane binary liquids. The former system is immiscible at methanol concentrations of ca. 8-90 mol %, and the latter two are miscible at any composition. At 0.03 mol % methanol, which is far from the critical concentration for the phase separation, the contact of the methanol macrocluster layers formed on the silica surface brought about the attraction from a distance of 42 +/- 5 nm which was similar to that observed in ethanol-cyclohexane. At a methanol concentration of 9.0 mol %, above bulk phase separation, completely different force profiles were observed. These results demonstrated that the molecular macrocluster formation was different from the wetting induced by the bulk.     

Stereoselective synthesis of tetrahydronaphthocyclobuta[1,2-d]pyrimidinediones from 5-fluoro-1,3-dimethyluracil and naphthalenes

Upon UV-irradiation in the presence of piperylene, 5-fluoro-1,3-dimethyluracil (5-FDMU) couples with naphthalenes having either an electron-withdrawing group or an electron-donating group by way of 1,2-cycloaddition via mode selectivity to give the corresponding naphthocyclobutapyrimidines regio- and stereo-selectively.     

Contact-impact analysis of geared rotor systems

In this paper, a finite element formulation, used to analyze the contact-impact behavior of geared rotor systems coupled with the rotational, lateral, and axial vibrations between gears at high rotational speeds, has been developed. A gear impact element to model the contact-impact behavior between gears has been developed and its numerical method is discussed. A relative displacement measurement idea has been proposed to measure vibration parameter for contrast experiment in high rotational geared system. The equations of motion are derived and solved iteratively during each time increment until the unbalanced force decrease to an acceptable tolerance level. Based on the proposed method, an analysis program, GEARS, has been developed. The contact-impact behavior of geared rotor systems is analyzed especially under high rotational speed condition as numerical examples, which are demonstrated to show the effectiveness of the proposed method.     

A new method for asperphenamate synthesis and its antimicrobial activity evaluation

Asperphenamate is a natural phenylalanine derivative. This compound was produced through a new, two-step synthetic route. It was also evaluated by the antimicrobial activity of the pure substance against Escherichia coli, Staphylococcus aureus and Cladosporium herbarum.