Chemical modification of diamond powder using photolysis of perfluoroazooctane

Photolysis of perfluoroazooctane with diamond powders led to chemical modification of the surface with the introduction of perfluorooctyl ester and ether functional groups, the presence of which was confirmed by means of FT-IR, XPS and 19F NMR measurements.     

Biodegradable Phosphorylcholine Polymer Hydrogels Cross‐Linked with Vinyl‐Functionalized Polyphosphate

A vinyl‐functionalized polyphosphate (PIOP) was synthesized by ring‐opening polymerization of 2‐isopropyl‐2‐oxo‐1,3,2‐dioxaphospholane and 2‐(2‐oxo‐1,3,2‐dioxaphosphoroyloxyethyl methacrylate) with triisobutylaluminum as an initiator. The number‐averaged molecular weight of the PIOP was 1.2 × 10⁴. The average number of vinyl groups in the PIOP is 2.20. Transparent hydrogels were prepared by the radical polymerization of 2‐methacryroyloxyethyl phosphorylcholine with PIOP as a cross‐linking reagent. These hydrogels may have many applications in the biomedical field because of their biodegradability and biocompatibility.

Synthetic route of PIOP.     

RAFT synthesis of an amphiphilic block copolymer bearing chlorin rings in the hydrophobic segment and its application in photodynamic therapy

RAFT polymerization of styrene (St) in the presence of 5,10,15,20‐tetrakis(pentafluorophenyl)porphyrin (TFPP) was conducted using 4‐cyano‐4‐(thiobenzoyl)thiopentanoic acid as a chain‐transfer agent and azobisisobutyronitrile as an initiator at 60 °C. The resulting polymer exhibited a chlorin‐like UV‐vis spectrum, which indicated that the polymer possessed a reduced TFPP structure. Furthermore, an SEC trace recorded using UV‐vis detector (λ = 410 nm), which selectively detected the TFPP‐incorporated polymer, shifted toward higher molecular mass as the polymerization progressed. This evidence indicated that TFPP acted as a vinylene‐type monomer, such as maleimide, to form a copolymer, namely, poly(St‐co‐TFPP). The mole fraction of TFPP units was estimated to be 0.74 × 10^?3, which was close to that in the feed (1 × 10^?3). Chain extension of poly(St‐co‐TFPP) with polyethylene glycol monomethyl ether acrylate (PEGA) was performed to afford the amphiphilic block copolymer poly(St‐co‐TFPP)‐b‐poly(PEGA). The degrees of polymerization of St and PEGA were determined to be 64 and 75, respectively. Poly(St‐co‐TFPP)‐b‐poly(PEGA) formed micelles following dialysis. The median diameter of the micelles in solution was determined to be 16 nm by DLS. The photocytotoxicity of the micelle solution was evaluated in a human glioblastoma cell line (U251) and an N‐methyl‐N'‐nitro‐N‐nitrosoguanidine‐induced mutant of a rat murine RGM‐1 gastric carcinoma mucosal cell line (RGK‐1). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3395–3403     

Total Synthesis of Lajollamycin B

The first total synthesis of lajollamycin B, a structurally novel nitro-tetraene spiro-β-lactone/γ-lactone antibiotic, is described. The convergent synthesis involves the construction of the C8′–C11′ nitrodienylstannane and its coupling with the segment prepared from the C1′–C7′ ω-iodoheptadienoic acid and the right-hand heterocyclic fragment, which has been utilized for our previous syntheses of oxazolomycin A. The revision of the geometry of the terminal Δ^{10′, 11′}-double bond from E to Z is also described for the structure of natural lajollamycin B.     

Synthesis of polymers having a phospholipid polar group connected to a poly(oxyethylene) chain and their protein adsorption-resistance properties

New methacrylates having a phospholipid polar group which was connected to various lengths of poly(oxyethylene) chains to form a polymerizable group (MEOnPC) were synthesized. The MEOnPC could polymerize with n-butyl methacrylate (BMA) in ethanol using a conventional radical polymerization technique. The unit mole fraction of MEOnPC in the polymer corresponded to that in the feed monomer solution. The MEOnPC polymers were soluble in ethanol, insoluble in water, but swelled in water and became hydrated. On the surface of a poly(BMA) membrane coated with MEOnPC, the phosphorylcholine groups of the MEOnPC unit present were determined by x-ray photoelectron spectroscopy. As a fundamental evaluation for biomedical materials, adsorption of one of the plasma proteins, fibrinogen, on acrylic beads coated with the MEOnPC polymers was evaluated. The amount of fibrinogen adsorbed on the MEOnPC polymer was smaller than that on the original acrylic beads, poly(BMA) and poly(2-hydroxyethyl methacrylate). The increase in the MEOnPC unit mole fraction in the polymer showed more effective protein adsorption-resistant properties. © 1996 John Wiley & Sons, Inc.     

氨基羧酸纤维分离富集水中痕量铅镉

铅、镉是有毒元素,严重危害人体健康,因此水中铅镉的含量历来是水质监测评价中的必测项目。但由于水样中铅镉含量较低,且基体干扰严重,所以测定前必须采取一定的富集与分离方法。本文在原螯合纤维制备的基础上［１,２］改换某些原料［３,４］,制备了氨基乙酸纤维滤...     

Synthesis of epigallocatechin trimer, (epigallocatechin)2-epicatechin,and (epigallocatechin)2-catechin via a Lewis acid mediated one-pot condensation and their antitumor activities in prostate cancer cells

Syntheses of epigallocatechin trimer, (epigallocatechin)₂-epicatechin and (epigallocatechin)₂-catechin were achieved. The key condensation to form the proanthocyanidin trimer derivatives was accomplished in a one-pot procedure using a dimeric epigallocatechin electrophile, which was prepared in situ by self-condensation of an epigallocatechin derivative, and an epigallocatechin, epicatechin, or catechin derivative as the nucleophile in the presence of a Lewis acid. The epigallocatechin monomer to trimer compounds containing a pyrogallol group significantly suppressed cell proliferation in PC-3 prostate cancer cells.     

A new method of using supercritical carbon dioxide as a green solvent for synthesis and purification of 5,5‴-bis(tridecafluorohexyl)-2,2′:5′,2″:5″,2‴-quaterthiophene,which is one of n-type organic semiconducting materials

We have investigated synthesis as well as purification of 5,5?-bis(tridecafluorohexyl)-2,2′:5′,2″:5″,2?-quaterthiophene (BFH-4?T, n-type organic semiconducting material) using supercritical carbon dioxide (scCO₂) as a green solvent. BFH-4T was obtained in good selectivity and high yield by TDAE/PdCl₂-catalyzed reductive coupling reaction of 5-bromo-5′-(tridecafluorohexyl)-2,2′-bithiophene in scCO₂. We have also successfully established purification of the reaction mixture by passing scCO₂ in the reaction vessel. The product was yellow powder of BFH-4T with purity of more than 99% and Pd catalyst was not contained.     

Preparation of thermo- and redox-responsive branched polymers composed of three-armed oligo(ethylene glycol)

We herein report the preparation of thermo- and redox-responsive branched polymers by the condensation reaction of three-armed oligo(ethylene glycol) (trisOEG) and cystamine (CA). The prepared branched polymers exhibited a soluble–insoluble transition at a lower critical solution temperature (LCST) and formed coacervate droplets through a liquid–liquid phase separation process. We then demonstrated control of the LCSTs of the branched polymers by varying the feed ratio of CA and the surrounding salt concentration close to body temperature. In addition, the trisOEG-cys _x polymer formed coacervate droplets above the LCST, in which hydrophobic molecules were condensed. The redox response of the branched polymers was also investigated. Interestingly, the branched polymers degraded to low-molecular-weight materials (i.e., trisOEG) in the presence of dithiothereitol as a reducing agent through cleavage of the disulfide bond of CA. This facile preparation of branched polymers is expected to be valuable in the context of functional biomedical materials and modifiers for materials surfaces, such as the bases for drug delivery carriers and separation materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2623–2629