Preparation of dibenzofuran-type amorphous polyetherketone by novel etherification reaction

4-Fluorobenzophenone reacted with potassium carbonate in the presence of silica catalyst in diphenyl sulfone solvent to yield 4,4′-dibenzoyldiphenyl ether. This new etherification reaction was extended to three difluoro aromatic ketones. 4,4′-Bis(4-fluorobenzoyl)diphenyl ether ( I ) reacted with potassium carbonate to yield a crystalline poly(oxy-1,4-phenylene-carbonyl-1,4-phenylene) (PEK) and 4,4′-bis{4-[4-(4-fluorobenzoyl)phenoxy]benzoyl}benzene ( II ) gave a crystalline poly(oxy-1,4-phenylene-carbonyl-1,4-phenylene-oxy-1,4-phenylene-carbonyl-1,4-phenylene-oxy-1,4-phenylene-carbonyl-1,4-phenylene-carbonyl-1,4-phenylene)(PEKEKEKK). 2,8-Bis(4-fluorobenzoyl)dibenzofuran ( III ) or 2,8-bis(4-chlorobenzoyl)dibenzofuran ( IV ) reacted with potassium carbonate to yield a poly(oxy-1,4-phenylene-carbonyl-2,8-dibenzofuran-carbonyl-1,4-phenylene) (PEKBK). The PEKBK was a noval amorphous polymer with the glass transition temperature of 222°C and it showed excellent thermal stability [T. Tanabe and I. Fukawa, Jpn. Pat., Kokai 64–74223 (1989)]. Several amorphous dibenzofuran type polyetherketone copolymers were prepared by coplycondensation of III with 4,4′-difluorobenzophenone ( V ) or 1,4-bis(4-fluorobenzoyl)benzene ( VI ) [T. Tanabe and I. Fukawa, Jpn. Pat., Kokai 1153722 (1989)]. © 1992 John Wiley & Sons, Inc.     

Chirality exchange from sp3 central chirality to axial chirality: benzannulation of optically active diaryl-2,2-dichlorocyclopropylmethanols to axially chiral alpha-arylnaphthalenes

Chirality exchange benzannulation of optically active (1S)-aryl(aryl')-2,2-dichlorocyclopropylmethanols (>99% ee) using TiCl4 successfully proceeded to give axially chiral (M)-alpha-arylnaphthalenes with excellent levels of stereo induction (>99% ee). This unique transformation involves the single-step chirality exchange from sp3 central chirality to axial chirality, that is, a type of excellent memory effect.     

Recent topics of the metallacycles composed of the heavier group 14 elements

This Letter reviews recent advance of metallacycles with chelating Si-, Ge-, and Sn-ligands. Dehydrogenative bond-forming reactions of organosilanes, -germanes, and -stannanes promoted by Pd and Pt complexes afford four- and five-membered metallacycles composed of heavier group 14 elements. It has a couple of advantages such as easier preparation of the starting compounds and reaction procedure than the common metathesis reactions of dianions with transition metal dihalide complexes. These metallacycles are regarded as possible intermediates in catalytic dehydrocoupling polymerizations or as convenient precursors to form discrete oligomers.     

Polymerization of Acrylamide in Aqueous Solution of Poly(N‐isopropylacrylamide) at Lower Critical Solution Temperature

Acrylamide (AAm) was found to polymerize in a solution of poly(N‐isopropylacrylamide) (PNIPAAm) in water at around its lower critical solution temperature (LCST) (32°C) without any initiators. This phenomenon was specifically observed in aqueous solutions of the polymers having LCST such as PNIPAAm and poly(methylvinylether) (PMVE). AAm polymerized only when PNIPAAm and AAm were dissolved in water below LCST of PNIPAAm and then the solution was warmed up to the polymerization temperature (40°C). On the other hand, the polymerization of AAm did not proceed when AAm was added into aqueous PNIPAAm solution during and after the phase separation above 32°C. Furthermore the polymerizability of AAm was remarkably affected by the concentration and molecular weight of the PNIPAAm additives. Under the condition of lower PNIPAAm concentration (0.30 mol/L), the increase in the molecular weight of PNIPAAm considerably increased the molecular weight of the resulting PAAm but decreased the yield of PAAm. Under the condition of higher PNIPAAm concentration (0.60 mol/L) the polymerizability was not so affected by the molecular weight of PNIPAAm, while the molecular weight of PAAm formed by using higher molecular weight PNIPAAm was higher than those of PAAm formed by using lower molecular weight PNIPAAm. Moreover, the molecular weight of PAAm formed by the PNIPAAm induced polymerization of AAm was much higher than that of the polymer obtained by the radical polymerization using AIBN in THF or VA‐ 061 in water.     

Concentration dependences of dielectric properties at 105 Hz and 106 Hz for aqueous solutions of hydroxypropyl cellulose

The concentration dependences of dielectric properties measured at 10⁵ Hz and 10⁶ Hz are reported for aqueous solutions of hydroxypropyl cellulose. Phase behaviour of the solutions was also observed with a polarizing optical microscope. For solutions with concentrations well above 40 wt %, polydomain textures, including the banded texture, were observed after a prehistory of deformation. No significant discontinuous changes in the dielectric constant, ε_r′, and loss factor, ε_r″, were found at the concentrations around the onset of the isotropic–cholesteric phase transition and in the biphasic region. In contrast, the steeper changes in ε_r′ and ε_r″ were found at the critical concentration for the fully developed cholesteric phase transition with the polydomain textures.     

In vivo estimation of optical properties of rat liver using single-reflectance fiber probe during ischemia and reperfusion

Optical Review - To quantify the changes in optical properties of in vivo rat liver tissue, we applied diffuse reflectance spectroscopy (DRS) system using single-reflectance fiber probe during...     

One-dimensional beam ordering of protons in a storage ring

The ordering of protons has been observed at a new storage ring, S-LSR, at Kyoto University. Abrupt jumps in the momentum spread and the Schottky noise power were observed for protons for the first time at a particle number of approximately 2000, upon applying electron cooling with electron currents of 25, 50, and 100 mA. The transition temperature was 0.17 and 1 meV in the longitudinal and transverse directions, respectively. The transverse temperature of the proton beam was much below that of electrons at the transition, which played an essential role in the ordering of protons.     

Serine‐Selective Aerobic Cleavage of Peptides and a Protein Using a Water‐Soluble Copper–Organoradical Conjugate

The site‐specific cleavage of peptide bonds is an important chemical modification of biologically relevant macromolecules. The reaction is not only used for routine structural determination of peptides, but is also a potential artificial modulator of protein function. Realizing the substrate scope beyond the conventional chemical or enzymatic cleavage of peptide bonds is, however, a formidable challenge. Here we report a serine‐selective peptide‐cleavage protocol that proceeds at room temperature and near neutral pH value, through mild aerobic oxidation promoted by a water‐soluble copper–organoradical conjugate. The method is applicable to the site‐selective cleavage of polypeptides that possess various functional groups. Peptides comprising D ‐amino acids or sensitive disulfide pairs are competent substrates. The system is extendable to the site‐selective cleavage of a native protein, ubiquitin, which comprises more than 70 amino acid residues.