A New First-Order Phase Transition for an Extended Jaynes–Cummings–Dicke Model with a High-Finesse Optical Cavity in the BEC System<Superscript>†</Superscript>

We present a two-level atomic Bose–Einstein condensate (BEC) with dispersion, which is coupled to a high-finesse optical cavity. We call this model the extended Jaynes–Cummings–Dicke (JC-Dicke) model and introduce an effective Hamiltonian for this system. From the direct product of Heisenberg–Weyl (HW) coherent states for the field and U(2) coherent states for the matter, we obtain the potential energy surface of the system. Within the framework of the mean-field approach, we evaluate the variational energy as the expectation value of the Hamiltonian for the considered state. We investigate numerically the quantum phase transition and the Berry phase for this system. We find the influence of the atom–atom interactions on the quantum phase transition point and obtain a new phase transition occurring when the microwave amplitude changes. Furthermore, we observe that the coherent atoms not only shift the phase transition point but also affect the macroscopic excitations in the superradiant phase.     

Carbon-nanotube-modified glassy carbon electrodes for amplified label-free electrochemical detection of DNA hybridization

The preparation and attractive performance of carbon-nanotube modified glassy-carbon (CNT/GC) electrodes for improved detection of purines, nucleic acids, and DNA hybridization are described. The surface-confined multiwall carbon-nanotube (MWCNT) facilitates the adsorptive accumulation of the guanine nucleobase and greatly enhances its oxidation signal. The advantages of CNT/GC electrodes are illustrated from comparison to the common unmodified glassy carbon, carbon paste and graphite pencil electrodes. The dramatic amplification of the guanine signal has been combined with a label-free electrical detection of DNA hybridization. Factors influencing the enhancement of the guanine signal are assessed and optimized. The performance characteristics of the amplified label-free electrochemical detection of DNA hybridization are reported in connection to measurements of nucleic-acid segments related to the breast-cancer BRCA1 gene.     

Adsorption characteristics of activated carbons obtained from corncobs

Dried, crushed, corncobs were carbonized at 500°C and steam activated (in one- or two-step schemes), or activated with H₃PO₄. The products were characterized by N₂ adsorption at 77 K, using the BET, _s and DR methods. Adsorption capacity was demonstrated by the iodine and phenol numbers, and the isotherms of methylene blue and Pb²⁺ ions, from aqueous solutions. A distribution of porosity in the carbons was estimated within the various ranges (ultra-, super-, meso- and macropores). Simple carbonization yields a poor adsorbing carbon; only its uptake for iodine was high and proposed to be due to an addition reaction on residual unsaturation of the parent lignocellulosic structures. Enhanced porosity was best associated with chemical activation and/or steam pyrolysis at 700°C. These activated carbons proved highly porous and rich in mesopores, and showed high adsorption capacity for methylene blue and Pb²⁺ ions. Phenol uptake was found to depend on surface chemical nature of the carbon rather than its porous properties. Corncobs were postulated to be feasible as feedstock to produce good adsorbing carbons, under the one-step activation schemes outlined here.     

Nanoparticle-based sensing of glycan-lectin interactions

Here we present the first report on nanoparticle-based biosensing of glycan markers of diseases. The protocol relies on the competition between a nanocrystal (CdS)-tagged sugar and the target sugar for the binding sites of surface-confined lectin and monitoring the extent of competition through highly sensitive electrochemical detection of the captured nanocrystal. This development is expected to allow decentralized detection of carbohydrate moieties and lectin-carbohydrate interactions to be performed more rapidly, sensitively, inexpensively, and reliably.     

Synthesis,spectral characterization,anticancer and antibacterial studies of cyclodiphosph(V)azane derivatives and their copper(II) complexes

The new cyclodiphosph(V)azane derivatives (1,3-dimethyl-2,4-dioxo-2',4'-bis(2,4-bis(dimethylaminopropylimino)cyclodiphosph(V)azane (H₂L¹) (1,3-dimethyl-2,4-dioxo-2',4'-bis(2,4-bis(dimethylaminoethylimino)cyclodiphosph(V)azane (H₂L²) and (1,3-dimethyl-2,4-dioxo-2'-(dimethylaminoethylimino)-4'-(dimethylaminopropyl-imino)cyclodiphosph(V)azane (H₂L³) containing four active coordination centers (NNNN) and their Cu(II) complexes have been synthesized and characterized by elemental analyses, spectroscopic methods, molar conductance as well as thermal and magnetic measurements. The UV–Vis and mass spectra of the ligands and their Cu(II) complexes were also recorded. The copper(II) complexes were found to have magnetic moments of 1.58–1.69 B. M. corresponding to one unpaired electron. The possible geometries of the complexes were assigned on the basis of EPR, electronic, and infrared spectral studies. The absence of water molecules in all complexes was supported by thermal studies. All the thermal decomposition processes ended with the formation of CuO. The kinetic and thermodynamic parameters have been calculated. The ligand (H₂L³) and its Cu(II) complexes were screened for their anticancer studies against human breast cancer cell lines MCF-7 and minimum inhibitory concentration was calculated. The screening was extended to the antibacterial activity using Kirby–Bauer single disk susceptibility test for all compounds.     

Spectroscopic analytical study for the charge-transfer complexation of certain cephalosporins with chloranilic acid.

Studies were carried out to develop a simple, rapid and accurate spectrophotometric method for the analysis of fifteen cephalosporins. The method depends on the charge-transfer complexation reaction between any of these drugs as an n-electron donor and p-chloranilic acid (p-CA) as a pi-acceptor to form a violet chromogen measured at 520 nm. Different variables affecting the reaction were studied and optimized. Under the optimum conditions, linear relationships with good correlation coefficients (0.9986-0.9996) were found between the absorbances and the concentrations of the studied drugs in the range of 4-1,200 microg ml(-1). The limits of assay detection ranged from 2.54 to 42.83 microg ml(-1). The accuracy and precision of the method were satisfactory. The method was successfully applied to an analysis of the studied drugs in their pharmaceutical formulations; the recovery percentages ranged from 96.76 +/- 0.87% to 100.50 +/- 1.30%. The interaction sites were confirmed by UV/VIS, IR, 1H-NMR techniques. Molecular modeling for the interaction was used for deriving an equation for calculating the epsilon value for a particular drug. This equation gave a perfect prediction for the degree of interaction of the investigated drugs with the p-CA reagent.     

Surface and adsorptive properties of carbons prepared from biomass

A number of activated carbons were prepared from a locally available by-product, corncobs, under currently established activation schemes. Obtained carbons were characterized by N₂ adsorption at 77 K and the isotherms were analyzed by BET and α_s methods. Steam-activation at 900 °C produced a microporous carbon having the highest S^α of 788 m² g⁻¹, whereas activation with air at 350 °C produced a carbon of S^α = 321 m²/g and possess wider pores. KOH impregnation with char in ratio 1:1 (w/w) and impregnated in the same ratio with the raw material prior to pyrolysis at 700 °C for 1 h, gave CK700, K700 respectively. An additional sample was obtained by oxidizing part of K700 with conc. HNO₃. All three KOH carbons show pore structures much close to char itself which may be due to potassium salt left in pores and is not easily leached with repeated water washings. In addition, KOH is more effective on the precursor itself than on its char of already developed porosity. FT-IR spectra show an increase in oxygen functionalties on the carbon surface as a result of activation process and the bands become stronger in the spectra of the acid-treated sample. The oxidized carbon sample showed relatively higher uptake of Pb²⁺ and MB and its surface chemistry plays the key role in their adsorption, while sharp decrease was observed in the uptake of phenol and mono-nitrophenols from aqueous solutions. An SEM study showed that air activation produce obvious voids reflecting its erosive effect on the external carbon surface.     

Magnetic bead-based label-free electrochemical detection of DNA hybridization.

Magnetic bead capture has been used for eliminating non-specific adsorption effects hampering label-free detection of DNA hybridization based on stripping potentiometric measurements of the target guanine at graphite electrodes. In particular, the efficient magnetic separation has been extremely useful for discriminating against unwanted constituents, including a large excess of co-existing mismatched and non-complementary oligomers, chromosomal DNA, RNA and proteins. The new protocol involves the attachment of biotinylated oligonucleotide probes onto streptavidin-coated magnetic beads, followed by the hybridization event, dissociation of the DNA hybrid from the beads, and potentiometric stripping measurements at a renewable graphite pencil electrode. Such coupling of magnetic hybridization surfaces with renewable graphite electrode transducers and label-free electrical detection results in a greatly simplified protocol and offers great promise for centralized and decentralized genetic testing. A new magnetic carbon-paste transducer, combining the solution-phase magnetic separation with an instantaneous magnetic collection of the bead-captured hybrid, is also described. The characterization, optimization and advantages of the genomagnetic label-free electrical protocol are illustrated below for assays of DNA sequences related to the breast-cancer BRCA1 gene.     

Open‐circuit Electrochemical Polymerization for the Sensitive Detection of Phenols

We report on a novel electrochemical method for electro‐polymerizing phenols under open‐circuit conditions. The method developed here is simple, sensitive, rapid, and overcomes the well‐documented surface fouling of carbon electrodes by phenols. A pre‐charged disposable graphite pencil electrode (pCGPE) was found to be useful for both phenol sampling and sensing. The pCGPE was prepared by charging the surface of a graphite pencil electrode by applying a cyclic voltammetry electrochemical treatment in a NaOH solution. Phenol sampling was accomplished by immersing the pCGPE into a phenol solution. This method permitted phenol detection with a detection limit of 4.17 nM (0.39 ppt).