Sputtering angle effects by Kr mixing in N+ ion beam on the lifetime of nitrided carbon stripper foils

Nitrided carbon stripper (NCS) foils with high nitrogen content were produced by ion beam sputtering of reactive nitrogen gas. Such foils seem to be very useful as strippers in high-intensity heavy ion accelerators. We have conducted comprehensive research, development, and production of such foils with high reproducibility. Krypton, a heavy noble gas, was mixed with the reaction nitrogen gas (IBSRN) in the ion beam sputtering process to produce stripper foils with short sputtering deposition time and long lifetimes in the high intensity ion beam irradiation. With the (N₂ + Kr) mixed gas ions we investigated the influence of different sputtering angles (α) on the lifetime of the NCS-foils in case of poly-graphite material. The lifetime measurement of these foils of 20 ± 5 μg/cm² was performed with a 3.2 MeV Ne⁺ ion beam as usual. The foils made at a sputtering angle of 15° showed a maximum of 11.0 and 7.5  C/cm² average charge density, respectively, which corresponded to about 275 and 187 times the lifetime of the best commercially available foils.     

α-Trifluoromethyl Chalcones as Potent Anticancer Agents for Androgen Receptor-Independent Prostate Cancer

α-Trifluoromethyl chalcones were prepared and evaluated for their antiproliferative activities against androgen-independent prostate cancer cell lines as well as five additional types of human tumor cell lines. The most potent chalcone 5 showed superior antitumor activity in vivo with both oral and intraperitoneal administration at 3 mg/kg. Cell-based mechanism of action studies demonstrated that 5 induced cell accumulation at sub-G1 and G2/M phases without interfering with microtubule polymerization. Furthermore, several cancer cell growth-related proteins were identified by using chalcone 5 as a bait for the affinity purification of binding proteins.     

Study on transport of molecules in gel by surface-enhanced Raman spectroscopy

Cellulose - Surface-enhanced Raman spectroscopy (SERS)-based biosensors have recently been extensively developed because of their high sensitivity and nondestructive nature. Conventional SERS...     

Manganese‐Corrole Complexes as Versatile Catalysts for the Ring‐Opening Homo‐ and Co‐Polymerization of Epoxide

Manganese‐corrole complexes in combination with a co‐catalyst [PPN]X ([PPN]⁺=bis(triphenylphosphoranylidene)iminium) were found to be new versatile catalysts for the polymerization of epoxides, copolymerization of epoxides with CO₂, and copolymerization of epoxides with cyclic anhydrides affording a wide range of polymeric materials. This work should allow the synthesis of new types of improved innovative (co)polymers with original properties and would clearly increase the number of applications for polyesters, polycarbonates, and polyethers.     

Expression and Characterization of Recombinant GH11 Xylanase from Thermotolerant Streptomyces sp. SWU10

Xylans are major hemicellulose components of plant cell wall which can be hydrolyzed by xylanolytic enzymes. Three forms of endo-β-1,4-xylanases (XynSW1, XynSW2A, and XynSW2B) produced by thermotolerant Streptomyces sp. SWU10 have been reported. In the present study, we described the expression and characterization of the fourth xylanase enzyme from this bacteria, termed XynSW3. The gene containing 726 bp was cloned and expressed in Escherichia coli. The recombinant enzyme (rXynSW3) was purified from cell-free extract to homogeneity using Ni-affinity column chromatography. The apparent molecular mass of rXynSW3 was 48 kDa. Amino acid sequence analysis revealed that it belonged to a xylanase of glycoside hydrolase family 11. The optimum pH and temperature for enzyme activity were 5.5–6.5 and 50 °C, respectively. The enzyme was stable up to 40 °C and in wide pH ranges (pH 0.6–10.3). Xylan without arabinosyl side chain is the most preferable substrate for the enzyme. By using birch wood xylan as substrate, rXynSW3 produced several oligosaccharides in the initial stage of hydrolysis, and their levels increased with time, demonstrating that the enzyme is an endo-acting enzyme. The major products were xylobiose, triose, and tetraose. The rXynSW3 can be applied in several industries such as food, textile, and biofuel industries, and waste treatment.     

Phospholipid Polymer Hydrogel Matrices with Dually Immobilized Cytokines for Accelerating Secretion of the Extracellular Matrix by Encapsulated Cells

Construction of 3D tissues by various types of cells with specific characteristics is an important and fundamental technology in tissue reconstruction medicine and animal‐free diagnosis system. To do so, an excellent extracellular matrix (ECM) is needed for encapsulation of cells and maintaining cell activity. Spontaneously forming hydrogel matrix is used by complexation between two water‐soluble polymers, 2‐methacryloyloxyethyl phosphorylcholine polymer bearing phenylboronic acid groups and poly(vinyl alcohol). Two cytokines for cell proliferation are immobilized in the hydrogel matrix to control the activities of the encapsulated cells. The cytokine‐immobilized hydrogel matrix can encapsulate both L929 fibroblasts and normal human dermal fibroblasts under mild condition. The physical properties of the hydrogel matrix can follow the proliferation process of the encapsulated cells. The encapsulated cells secrete ECM in the polymer hydrogel networks upon 3D culturing for 7 days. Consequently, the tissue‐mimicking ECM hybrid hydrogels are fabricated successfully.     

Novel gas chromatography-mass spectrometry database for automatic identification and quantification of micropollutants

A novel gas chromatography-mass spectroscopy (GC-MS) database for identification and quantification of micropollutants in environmental and food samples is reported. GC retention times, calibration curves, and mass spectra of nearly 700 chemicals were registered in the database, and the GC retention times of registered chemicals in actual samples were predicted from the retention times of n-alkanes measured before sample analysis. Differences between predicted and actual retention times were less than 3 s, an accuracy that is nearly identical to that obtained by analysis of standard substances. After the retention times were predicted, a calibration file for the GC-MS instrument was created from the predicted retention times, calibration curves, and mass spectra of the registered chemicals. With the resulting calibration file, automated identification of all the chemicals in actual samples was possible without the use of standards, and the identification method was as reliable as conventional methods. When the GC inlet, column, and tuning conditions were adjusted using GC-MS performance check standards, relative standard deviations of 20% or less for determination values could be obtained. More than 90% of the chemicals in the database could be detected at a sensitivity sufficient for all practical purposes (100 pg or less). Because each chemical in the database, to which new substances can easily be added, can be determined in 1 h, micropollutants in samples can be analyzed efficiently and inexpensively.     

A method for calibration and validation subset partitioning

This paper proposes a new method to divide a pool of samples into calibration and validation subsets for multivariate modelling. The proposed method is of value for analytical applications involving complex matrices, in which the composition variability of real samples cannot be easily reproduced by optimized experimental designs. A stepwise procedure is employed to select samples according to their differences in both x (instrumental responses) and y (predicted parameter) spaces. The proposed technique is illustrated in a case study involving the prediction of three quality parameters (specific mass and distillation temperatures at which 10 and 90% of the sample has evaporated) of diesel by NIR spectrometry and PLS modelling. For comparison, PLS models are also constructed by full cross-validation, as well as by using the Kennard-Stone and random sampling methods for calibration and validation subset partitioning. The obtained models are compared in terms of prediction performance by employing an independent set of samples not used for calibration or validation. The results of F-tests at 95% confidence level reveal that the proposed technique may be an advantageous alternative to the other three strategies.     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.     

Does B3LYP correctly describe magnetism of manganese complexes with various oxidation numbers and various structural motifs?

We assessed the applicability and basis set dependency of the B3LYP functional to investigate magnetic interactions of Mn complexes. For the purpose, we constructed a test set consisting of 16 Mn complexes with various oxidation states and structural motifs.The B3LYP results correctly reproduced magnetism and magneto–redox correlation of the standard μ-oxo motifs with superexchange paths, while it does not work for weak magnetic complexes. We also showed that a modest basis set yields results similar to those of triple-zeta plus diffuse-and-polarization functions. This basis set is expected to be a standard basis set for investigating magnetism of manganese complexes.