Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Multipoint recognition of catecholamines by hydrindacene-based receptors accompanied by the complexation-induced conformational switching

The molecular recognition of catecholamines by hydrindacene-based receptors 1 and 2, as well as the durene-based receptor 3, and the guest-induced conformational changes are reported. These receptors selectively bind adrenaline and dopamine salts through the guests' ammonium group and 3-hydroxyl group on the aromatic ring. In the case of adrenaline, an additional hydrogen bond with a benzylic hydroxyl group is formed. In 2 % CD3CN/CDCl3, the association constants are of the order of 10(4) M(-1), which is much larger than with guests without the 3-hydroxyl groups (10(3) M(-1)). The two amide groups of receptor 1 can rotate freely around the C(aromatic)--C(amide) bond, whereas the tert-amide in 2 changes between two stable conformations at a slow enough rate to allow detection by (1)H NMR spectroscopy. In the absence of a guest molecule, the syn-conformer is less stable than the anti-conformer. On complex formation with adrenaline, the syn-conformer becomes dominant due to an intramolecular dipole-reversal effect in addition to multipoint hydrogen bonding.     

Kinetic stabilization of the [1.1]paracyclophane system: isolation and X-ray structural analysis of a [1.1]paracyclophane derivative and its interconversion with the transannular adduct

Intentionally designed kinetic stabilization of the [1.1]paracyclophane skeleton has been achieved by multiple substitution of the aromatic rings with trimethylsilylmethyl and N,N-dimethyl-carbamoyl groups, which serve to shield the proximate bridgehead carbon atoms sterically from access by other reagents. The bis(Dewar benzene) precursor (1a) has been prepared in essentially the same manner as previous derivatives--starting from the photocycloaddition of 1,4-bis(trimethylsilyl)-2-butyne to octa-hydroindacene-1,5-dione--except for a few critical modifications described in the text. Substituted [1.1]paracyclophane (2a), photochemically generated from the precursor, is indefinitely stable at 50 degrees C and suffers decomposition only by 8 % after 2 h at 100 degrees C in degassed n-decane, demonstrating its greatly improved kinetic stability compared to previous [1.1]paracyclophanes. Since 2a undergoes efficient photochemical transformation into the transannular addition product 3a, irradiation of la tends to produce a mixture of products consisting mainly of 3a. Compound 3a, however, reverts thermally to 2a in a process of half life 40 min at 55 degrees C; the activation parameters for this process are deltaH(not equal to)= 21.1 +/- 0.8 kcalmol(-1) and deltaS(not equal to) = -10.5 +/- 2.6 cal K(-1)mol(-1). Thus, on heating 3a in benzene and cooling the resultant solution, 2a is obtained as orange-red crystals. X-ray crystallographic analysis of 2a reveals benzene rings bent to the highest degree ever reported for a paracyclophane, with their face-to-face arrangement in unusually close proximity. The shortest nonbonding interatomic distance is 2.376 A; less than the sum of the van der Waals radii by more than 1.0A. The generation of related substituted [1.1]paracyclophanes and their kinetic stabilities are also reported.     

Gas separation membranes plasma-polymerized from perfluoromethylcyclohexane/methane mixture

Plasma-polymerizations of perfluoromethylcyclohexane (PFMCH)/methane (CH₄) mixture were investigated by elemental analysis, infrared spectroscopy, and ESCA; and gas transport characteristics of the plasma-films formed were studied. The addition of CH₄ molecules to PFMCH accelerated defluorination to form plasma-polymers poor in fluorocarbon units. The surface energy of the plasma-polymers increased with increasing the CH₄ concentration. The oxygen and nitrogen permeation coefficients (P_O2 and P_N2) and the P_O2/P_N2 ratio for the polymer films formed from the PFMCH/CH₄ mixture depended on the CH₄ concentration. The small CH₄ addition was effective in improvement of the P_O2 value and of the P_O2/P_N2 ratio, but the much addition was ineffective. The oxygen transport through the plasma-polymers was discussed.     

Facile S-alkyl thiocarbamate synthesis by a novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur

A novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamates. In the presence of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene), S-alkyl thiocarbamates are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20°C). In the absence of DBU, however, no formation of S-alkyl thiocarbamate is observed. The present DBU-assisted carbonylation can also be applied to new synthetic methods for benthiocarb and orthobencarb (herbicides) and carbamoyl chlorides.     

Kinetics of transient end-to-end contact of single-stranded DNAs

The formation of the pyrene (Py) dimer radical cation (Py(2)(*+)) was used to measure the kinetics of the intrastrand end-to-end contact rates of single-stranded DNAs (ssDNAs) in the 10 nanoseconds to the tens of microseconds time range. ssDNAs labeled with Py at both ends with the lengths of 3, 6, and 9 mer were synthesized, and the two-photon ionization method was employed to generate a Py(*+), which enables the measurements of the end-to-end contact rates from 10 ns. The formation rate of Py(2)(*+) depended on the length and the sequence of the ssDNAs, and about 1 order of magnitude faster rates were observed for the T-rich ssDNAs compared to those for the corresponding length of A-rich ssDNAs, showing that ssDNA made from adenines is much more rigid than that composed of thymidines. As for the T-rich ssDNAs, the formation of Py(2)(*+) attributed to the misfolded structures was also observed, which is consistent with the configurational diffusion model suggested by Ansari and co-workers.