Measurement of branching fractions for B-->eta(c)K(*) decays

We report measurements of branching fractions for charged and neutral B-->eta(c)K decays where the eta(c) meson is reconstructed in the K(0)(S)K+/-pi(-/+), K+K-pi(0), K(*0)K-pi(+), and pp; decay channels. The neutral B0 channel is a CP eigenstate and can be used to measure the CP violation parameter sin(2phi(1). We also report the first observation of the B0-->eta(c)K(*0) mode. The results are based on an analysis of 29.1 fb(-1) of data collected by the Belle detector at KEKB.     

Beam-polarization asymmetries for the p(gamma-->, K+)Lambda and p(gamma-->, K+)Sigma(0) reactions for E(gamma)=1.5-2.4 GeV

Beam polarization asymmetries for the p(gamma-->,K+)Lambda and p(gamma-->,K+)Sigma(0) reactions are measured for the first time for E(gamma)=1.5-2.4 GeV and 0.6相似文献   

A novel action of terpendole E on the motor activity of mitotic Kinesin Eg5

To reveal the mechanism of mitosis, the development of M phase-specific inhibitors is an important strategy. We have been screening microbial products to find specific M phase inhibitors that do not directly target tubulins, and rediscovered terpendole E (TerE) as a novel Eg5 inhibitor. TerE did not affect microtubule integrity in interphase, but induced formation of a monoastral spindle in M phase. TerE inhibited both motor and microtubule-stimulated ATPase activities of human Eg5, but did not affect conventional kinesin from either Drosophila or bovine brain. Although terpendoles have been reported as inhibitors of acyl-CoA:cholesterol O-acyltransferase (ACAT), the Eg5 inhibitory activity of TerE was independent of ACAT inhibition. Taken together, we demonstrate that TerE is a novel Eg5 inhibitor isolated from a fungal strain.     

Long-lived charge-separated state leading to DNA damage through hole transfer

The hole transfer causes the long-lived charge-separated state in DNA during the photosensitized one-electron oxidation of DNA. The combination of the transient absorption measurement and DNA damage quantification by HPLC clearly demonstrated that the yield of the DNA damage correlates well with the lifetime of the charge-separated state.     

NMR analysis of lignins in CAD-deficient plants. Part 1. Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins

Peroxidase/H2O2-mediated radical coupling of 4-hydroxycinnamaldehydes produces 8-O-4-, 8-5-, and 8-8-coupled dehydrodimers as has been documented earlier, as well as the 5-5-coupled dehydrodimer. The 8-5-dehydrodimer is however produced kinetically in its cyclic phenylcoumaran form at neutral pH. Synthetic polymers produced from mixtures of hydroxycinnamaldehydes and normal monolignols provide the next level of complexity. Spectral data from dimers, oligomers, and synthetic polymers have allowed a more substantive assignment of aldehyde components in lignins isolated from a CAD-deficient pine mutant and an antisense-CAD-downregulated transgenic tobacco. CAD-deficient pine lignin shows enhanced levels of the typical benzaldehyde and cinnamaldehyde end-groups, along with evidence for two types of 8-O-4-coupled coniferaldehyde units. The CAD-downregulated tobacco also has higher levels of hydroxycinnamaldehyde and hydroxybenzaldehyde (mainly syringaldehyde) incorporation, but the analogous two types of 8-O-4-coupled products are the dominant features. 8-8-Coupled units are also clearly evident. There is clear evidence for coupling of hydroxycinnamaldehydes to each other and then incorporation into the lignin, as well as for the incorporation of hydroxycinnamaldehyde monomers into the growing lignin polymer. Coniferaldehyde and sinapaldehyde (as well as vanillin and syringaldehyde) co-polymerize with the traditional monolignols into lignins and do so at enhanced levels when CAD-deficiency has an impact on the normal monolignol production. The implication is that, particularly in angiosperms, the aldehydes behave like the traditional monolignols and should probably be regarded as authentic lignin monomers in normal and CAD-deficient plants.     

A New Preparative Method for Allylic Indium(III) Reagents by Reductive Transmetalation of pi-Allylpalladium(II) with Indium(I) Salts

A reductive transmetalation of the pi-allylpalladium(II) complexes, generated in situ from a catalytic amount of a palladium(0) complex and a variety of allylic substrates, with indium(I) salts proceeded smoothly in various solvents, providing a new route for allylindium(III) reagents.     

1.5-mum emissions from laser-diode-pumped Nd-doped microchip solid-state lasers

1.5-mum emissions from Nd:YAG, Nd:YVO(4), and LiNdP(4) O>(12) microchip lasers pumped by laser diodes have been observed. These coherent emissions are attributed to the effect of high-energy modified lattice vibration owing to the existence of Nd ions as well as to stimulated intracavity Raman scattering enhanced by the microchip configuration. A four-wave mixing process involving two lasing fields and a Stokes field was identified as the generator of new adjacent 1.5-mu;m emission.     

Structural, AC, and DC magnetic properties of Zn1−xCoxFe2O4

Structural, AC and DC magnetic properties of polycrystalline Zn_1−xCo_xFe₂O₄ (x=0.2, 0.4) samples sintered at various temperatures (1100-1300 °C), and various dwell times (0.2-15 h) have been investigated thoroughly. The bulk density of the Zn_0.60Co_0.40Fe₂O₄ samples increases as the sintering temperature (T_s) increases from 1100 to 1250 °C, and above 1250 °C the bulk density decreases slightly. The Zn_0.80Co_0.20Fe₂O₄ samples show similar behavior of changes to that of Zn_0.60Co_0.40Fe₂O₄ samples except that the bulk density is found to be highest at 1200 °C. The DC magnetization as a function of temperature curves show that the Zn_0.60Co_0.40Fe₂O₄ sample is ferrimagnetic at room temperature while the Zn_0.80Co_0.20Fe₂O₄ sample is paramagnetic at room temperature. The T_c of Zn_0.80Co_0.20Fe₂O₄ sample is found to be 170 K from DC magnetization measurement. Separate measurement (AC magnetization), initial permeability as a function of temperature shows that the T_c of the Zn_0.60Co_0.40Fe₂O₄ sample is 353 K. Slight variation of T_c is observed depending on sintering condition. The initial permeability for the Zn_0.60Co_0.40Fe₂O₄ composition sintered at 1250 °C is found to be maximum.     

In-gap density of states in hole- and electron-doped CuO2 planes probed by scanning tunneling spectroscopy

The low-energy electronic structure of a c-axis Sr_xA_yCuO₂ (A is alkaline earth cation, x+y≦1, hole- and electron-doped infinite layer) thin film, grown by laser-molecular-beam epitaxy on a SrTiO₃ (001) substrate, has been studied using ultrahigh-vacuum scanning tunneling microscopy/spectroscopy. Images have been obtained for co-deposited Sr_xA_yCuO₂ thin films, which show the surface consisting of flat terraces separated by steps that are unit cell high. Tunneling spectra of undoped Sr_0.3Ca_0.7CuO₂ indicate a wide band gap of 1.8 eV which is consistent with the charge transfer gap. Hole-doped Sr_0.85CuO₂ shows in-gap states appearing at both the valence and conduction band edges. In contrast, for the electron-doped Sr_0.9La_0.1CuO₂, in-gap states appear predominantly above the Fermi level, and the spectral shape becomes asymmetric around the Fermi level. When these two systems are compared, barrier-height measurements reveal that there is no apparent shift of the Fermi level measured from the vacuum level. This suggests that the framework of the rigid-band picture might break down implying a strongly correlated electron system. Received: 20 August 1998 / Accepted: 15 February 1999 / Published online: 5 May 1999     

Profiling and biomarker identification in plasma from different Zucker rat strains via high mass accuracy multistage mass spectrometric analysis using liquid chromatography/mass spectrometry with a quadrupole ion trap-time of flight mass spectrometer

High mass accuracy electrospray ionisation multistage tandem mass spectrometry (MS(n)) was applied to metabolite profiling studies on plasma samples derived from two strains of rat (the Zucker (fa/fa) obese strain and the normal wild type). Using a quadrupole ion trap time-of-flight (QIT-TOF) mass spectrometer, metabolite profiling software was applied to locate components of biological significance that could account for the differences between the two strains of rat and a formula prediction software tool was used to help identify individual components. The primary factor discriminating between the two populations was the concentration of endogenous lipids. In the Zucker (fa/fa) obese strain, the dominant ion signals and MS(n) spectra were in agreement with lysoglycerophosphocholine components such as palmitoyllysophosphatidylcholine, 1-oleoylglycerophosphocholine, 1-octadecyl-sn-glycero-3-phosphocholine and 1-stearoylglycerophosphocholine and these were found in relatively higher concentrations compared to the normal wild type. Components were identified using high mass accuracy MS(n) data, formula prediction software and by agreement with published mass spectra through internet databases, rather than using a conventional approach with authentic standards. This application shows that the use of high mass accuracy electrospray ionisation MS(n) together with a software tool can be used effectively to detect and characterise unknown analytes in complex matrices, and represents a promising approach for future profiling studies.