Chemical properties of water-soluble,nonionic azo compounds as initiators for emulsion polymerization

Four kinds of water-soluble, nonionic azo compounds were studied in terms of their decomposition rate and initiator efficiency in radical polymerization, and then used for emulsion polymerization. They had relatively low initiator efficiency from 0.09 to 0.46. It was attributed to the susceptibility to a cage effect, depending on their molecular size and hydrophobicity. Four azo compounds initiated emulsion polymerization but nonionic latex particles were not obtained unexpectedly. Methanol-containing medium results in the formation of a bimodal particle size distribution as well as a bimodal molecular weight distribution. © 1996 John Wiley & Sons, Inc.     

Cationic polymerization with titanium(iv) compounds: Living polymerization and possibility of stereoregulation

This paper deals with the development of living cationic polymerizations and the possibility of stereoregulation therein based on the modulation of the Lewis acid activators by their ligands. For this, titanium(IV) chlorides [TiCl₄-n(OR)n] with various alkoxy or aryloxy groups were synthesized and employed for the cationic polymerizations of isobutyl vinyl ether (IBVE) in conjunction with HCl-IBVE adduct. Living polymerizations were feasible with the titanium chlorides [TiCl₂(OR)₂] disubstituted with isopropoxy or phenoxy groups in CH₂Cl₂ at −15°C. The meso (isotactic) contents of the polymers obtained with TiCl₂(OR)₂ at −78°C became larger (up to 86%) with bulkier o-substituents of phenoxy groups on the titanium compounds.     

In Vitro and In Silico Study of Analogs of Plant Product Plastoquinone to Be Effective in Colorectal Cancer Treatment

Plants have paved the way for the attainment of molecules with a wide-range of biological activities. However, plant products occasionally show low biological activities and/or poor pharmacokinetic properties. In that case, development of their derivatives as drugs from the plant world has been actively performed. As plant products, plastoquinones (PQs) have been of high importance in anticancer drug design and discovery; we have previously evaluated and reported the potential cytotoxic effects of a series of PQ analogs. Among these analogs, PQ2, PQ3 and PQ10 were selected for National Cancer Institute (NCI) for in vitro screening of anticancer activity against a wide range of cancer cell lines. The apparent superior anticancer potency of PQ2 on the HCT-116 colorectal cancer cell line than that of PQ3 and PQ10 compared to other tested cell lines has encouraged us to perform further mechanistic studies to enlighten the mode of anti-colorectal cancer action of PQ2. For this purpose, its apoptotic effects on the HCT-116 cell line, DNA binding capacity and several crucial pharmacokinetic properties were investigated. Initially, MTT assay was conducted for PQ2 at different concentrations against HCT-116 cells. Results indicated that PQ2 exhibited significant cytotoxicity in HCT-116 cells with an IC₅₀ value of 4.97 ± 1.93 μM compared to cisplatin (IC₅₀ = 26.65 ± 7.85 μM). Moreover, apoptotic effects of PQ2 on HCT-116 cells were investigated by the annexin V/ethidium homodimer III staining method and PQ2 significantly induced apoptosis in HCT-116 cells compared to cisplatin. Based on the potent DNA cleavage capacity of PQ2, molecular docking studies were conducted in the minor groove of the double helix of DNA and PQ2 presented a key hydrogen bonding through its methoxy moiety. Overall, both in vitro and in silico studies indicated that effective, orally bioavailable drug-like PQ2 attracted attention for colorectal cancer treatment. The most important point to emerge from this study is that appropriate derivatization of a plant product leads to unique biologically active compounds.     

Membrane permeation-controlled transdermal delivery system design. Influence of controlling membrane and adhesive on skin permeation of isosorbide dinitrate

A membrane permeation-controlled transdermal delivery system (MC-TDS) of isosorbide dinitrate (ISDN), a model drug, was prepared from polyvinyl alcohol aqueous gel containing the drug, a membrane consisting of ethylene-vinyl acetate copolymer membrane and acrylic adhesive (EV-a). The permeability of ISDN through the EV-a membrane was 2.5 times higher than that through excised hairless rat skin. The ratio of plasma concentration of ISDN after application of MC-TDS on stripped (damaged) skin relative to intact skin was lower than that after application of Frandol tape-S, a marketed ISDN TDS, which suggests that the EV-a membrane might work as a control membrane for overall delivery rate of ISDN to the body. When MC-TDS stored at 30 degrees C for 13.5-48h was applied to the damaged skin, however, the initial plasma concentration of ISDN was very much higher than the expected therapeutic level and was not controlled by the EV-a membrane. The initial high plasma concentration of ISDN after application of the stored MC-TDS on the damaged skin was due to migration of ISDN from the reservoir to the adhesive during storage at 30 degrees C. The migration of drugs into the adhesive might be an important problem in developing efficient MC-TDS.     

Dynamic behaviors of ferroelectric liquid crystal molecules under an applied electric field

The dynamic changes in ferroelectric liquid crystal (FLC) molecular alignments under an applied electric field are examined by observing the formation of conoscopic figures with a time resolution of 0.1 ms. Close agreements between observed and simulated conoscopic figures under low voltage (30 V) were obtained. Under high voltage (120 V), however, the observed conoscopic figures became blurred between 0.8 ms and 1.1 ms after reversal of the electric field. The light scattering producing the blurriness occurred due to the development of fast transient molecular alignments during the switching transition above the applied voltage 70 V.     

Optical properties of organic-inorganic hybrid films prepared by the two-step growth process

Thin films of microcrystalline (C₈H₁₇NH₃)₂PbBr₄ have been prepared by the two-step growth process as follows: (1) precipitation of nanometer-sized PbBr₂ particles on substrates by vapor deposition and then (2) growth of (C₈H₁₇NH₃)₂PbBr₄ films by exposing PbBr₂ particles to C₈H₁₇NH₃Br vapor. Atomic force microscope observations reveal that the substrate is fully covered with nanometer-sized rodlike precipitates. X-ray diffraction studies suggest that (C₈H₁₇NH₃)₂PbBr₄ films are found to be microcrystalline form, single phase and highly oriented with the c-axis perpendicular to the substrate surface. (C₈H₁₇NH₃)₂PbBr₄ films show a clear exciton absorption and free-exciton emission even at room temperature. At low temperatures below 40 K, the emission band separates into three bands at 3.07 (A-band), 3.14 (B-band) and 3.20 (C-band) eV, respectively. Both A- and C-bands correspond to the free-exciton emission with large binding energies. On the contrary, time-resolved PL spectra indicate that the B-band is attributed to phosphorescence formed by the intersystem crossing.     

Mössbauer Study of La1−x Ca x Mn1−y 57Fe y O3 with x=0,0.25; y=0.01

Temperature dependent Mössbauer measurements are done on the samples of La_1–x Ca _x Mn_1–y ⁵⁷Fe _y O₃ with x=0 and 0.25, and y=0.01. With decreasing temperature, the specimen with x=0.25 shows a paramagnetic to ferromagnetic transition around 175 K. In the specimen x=0.0, the temperature dependence of both the center shift () and the recoilless fraction (f) can be fitted very well with the Debye theory with a _D=320±50 K. But for the specimens with x=0.25, f and show distinct deviations from the Debye behavior in the temperature range in which the resistivity shows a sharp decrease. Dips observed in both the f and around the transition temperature suggest that the Jahn–Teller distortion observed in these systems is dynamic in nature.     

Syntheses and structural analysis of 10-monoxy- and -dioxy-5-N-substituted iminothianthrene derivatives and the stereochemical change on their sulfur atom under acidic and thermal conditions

5-(N-p)-Toluenesulfonyl)iminothianthrenes, whose sulfur atoms are oxidized to a sulfoxide or sulfone at the 10-position, were hydrolysed readily in high yield to N-unsubstituted-sulfilimines by using concentrated H2SO4. During hydrolysis, 10-monoxy-5-N-unsubstituted-sulfilimines were obtained as a separable mixture of the cis and trans isomers. The stereochemical interconversion of these compounds was studied under both hydrolytic and thermal conditions and their structures were elucidated by using X-ray crystallography.     

Synthesis of sialyl Lewis X-polysaccharide conjugates

Sialyl Lewis X (SLeX) is well known as a ligand of the cell adhesion molecule E-selectin which is specifically expressed at inflammatory lesion sites. We have synthesized several SLeX-polysaccharide conjugates and examined their potential for drug delivery to inflammatory lesions. The AUC (area under the blood concentration-time curve) 0-24 h of SLeX-CMCht (1), SLeX-CMPul (2) and SLeX-DSH (3) at the inflammatory lesion was about 60-, 300-, and 30-fold higher than that of the monovalent SLeX (7), respectively. Moreover, 1 showed 2-fold higher accumulation in the inflammatory lesion than SLN-CMCht (4), and 2 showed 2.5-fold higher accumulation than SLN-CMPul (5).