Coordination polymers of CdII and PbII derived from bipyridine–glycoluril: influence of metal‐ion size and counter‐ions

Two new one‐dimensional (1D) coordination polymers (CPs), namely catena‐poly[[[aquacadmium(II)]‐bis(μ‐4b,5,7,7a‐tetrahydro‐4b,7a‐epiminomethanoimino‐6H‐imidazo[4,5‐f][1,10]phenanthroline‐6,13‐dione)] bis(perchlorate) dihydrate], {[Cd(C₁₄H₁₀N₆O₂)₂(H₂O)](ClO₄)₂·2H₂O}_n or {[Cd(BPG)₂(H₂O)](ClO₄)₂·2H₂O}_n, 1 , and catena‐poly[[lead(II)‐bis(μ‐4b,5,7,7a‐tetrahydro‐4b,7a‐epiminomethanoimino‐6H‐imidazo[4,5‐f][1,10]phenanthroline‐6,13‐dione)] bis(perchlorate) dihydrate], {[Pb(C₁₄H₁₀N₆O₂)₂](ClO₄)₂·2H₂O}_n or {[Pb(BPG)₂](ClO₄)₂·2H₂O}_n, 2 , have been synthesized using bipyridine–glycoluril (BPG; systematic name: 4b,5,7,7a‐tetrahydro‐4b,7a‐epiminomethanoimino‐6H‐imidazo[4,5‐f][1,10]phenanthroline‐6,13‐dione), a urea‐fused tecton, in a mixed‐solvent system. The Cd^II ion in 1 is heptacoordinated and the Pb^II ion in 2 is hexacoordinated, with the Cd^II ion adopting a pentagonal bipyramidal geometry and the Pb^II ion adopting a distorted octahedral geometry. Both CPs form infinite linear chain structures which are hydrogen bonded to each other leading to the formation of three‐dimensional supramolecular network structures. Topological analysis of CPs 1 and 2 reveals that the structures exhibit 1D chain‐like arrangements in an AB–AB sequence and shows platonic uniform 2‐connected uninodal topologies. Furthermore, a comparative analysis of a series of structures based on the BPG ligand indicates that the size of the metal ion and the types of counter‐ions used have a great influence on the resulting frameworks and properties.     

Structures and energetics of electrosprayed uracil(n)Ca2+ clusters (n = 14-4) in the gas phase

Clusters of uracil (U) about a calcium dication, U(n)Ca(2+) (n = 14-4), have been studied in the gas phase by both experimental and theoretical methods. Temperature dependent blackbody infrared radiative dissociation (BIRD) experiments were performed on U(n)Ca(2+) clusters with n = 14-5 and the observed Arrhenius parameters are reported here. Master equation modeling of the BIRD kinetics data was carried out to determine threshold dissociation energies. Initial geometry calculations were performed using the B3LYP density functional and 3-21G(d) basis set. A sample of ten conformations per cluster was obtained through a simulated annealing study. These structures were optimized using B3LYP/6-31G(d) level of theory. Fragment-based hybrid many body interaction (HMBI) MP2/6-311++G(2df,2p)/Amoeba calculations were performed on representative conformations to determine theoretical binding energies. Results were examined in relation to cluster size (n). A significant increase in the energy required to remove uracil from U(6)Ca(2+) when compared to larger clusters supports previous reports that the calcium ion is coordinated by six uracil molecules in the formation of an inner shell. For clusters larger than n = 6, an odd-even alternation in threshold dissociation energies was observed, suggesting that the outer shell uracil molecules bind as dimers to the inner core. Proposed binding schemes are presented. Multiple structures of U(5)Ca(2+) are suggested as being present in the gas phase where the fifth uracil may be either part of the first or second solvation shell.     

Nanofibril self-assembly of an arylene ethynylene macrocycle

Nanofibril structures have been fabricated from an arylene ethynylene macrocycle (AEM), which consists of a square frame corner-joined by four carbazole moieties. The fabrication was performed through a gelating process by cooling a warm, homogeneous solution in cyclohexane at high temperature (e.g., 100 degrees C) to room temperature. During the gelation, the molecules become organized, with optimal pi-pi stacking in cooperation with the side-chain association. The favorable pi-pi stacking facilitates the 1D growth of molecular assembly.     

Determination of ethyl glucuronide in urine using reversed-phase HPLC and pulsed electrochemical detection (Part II)

A direct, versatile method for the determination of ethyl glucuronide (EtG), a biomarker of ethanol consumption, in urine has been developed using reversed-phase liquid chromatography with pulsed electrochemical detection (PED). EtG and methyl glucuronide (MetG), which serves as an internal standard, are readily separated using a mobile phase consisting of 1% acetic acid/acetonitrile (98/2, v/v). Post-column addition of NaOH allows for the detection of all glucuronides using PED at a gold working electrode. Upon optimization, EtG was found to have a limit of detection of 0.03 μg/mL (7 pmol; 50 μL injection volume) and repeatability at the limit of quantitation of 1.7%R.S.D. (relative standard deviation). Solid-phase extraction (SPE) using an aminopropyl phase was used to remove interferents in urine samples prior to their analysis. Compound recovery following SPE was approximately 50 ± 2%. The forensic utility of this method was further validated by the analysis of 29 post-mortem urine specimens, whose results agreed strongly with certified determinations.     

Synthesis and biological evaluation of benzimidazole pendant cyanopyrimidine derivatives as anticancer agents

Thirteen new benzimidazole pendant cyanopyrimidine derivatives were synthesized. The compounds were synthesized through multistep reaction protocol. The structures of synthesized derivatives were studied by EI-MS, ¹H NMR, FT-IR and elemental analysis. All the compounds were studied for their anticancer activity at National Cancer Institute. Except compound 7j , all the compounds unveiled cytotoxicity against cancer cells. The most active compound 7a had shown highest value of growth inhibition of 88.44% and 84.19% against HOP-92 and T-47D cancer cell lines.     

Nano-enabled biosensing systems for intelligent healthcare: towards COVID-19 management

Biosensors are emerging as efficient (sensitive and selective) and affordable analytical diagnostic tools for early-stage disease detection, as required for personalized health wellness management. Low-level detection of a targeted disease biomarker (pM level) has emerged extremely useful to evaluate the progression of disease under therapy. Such collected bioinformatics and its multi-aspects-oriented analytics is in demand to explore the effectiveness of a prescribed treatment, optimize therapy, and correlate biomarker level with disease pathogenesis. Owing to nanotechnology-enabled advancements in sensing unit fabrication, device integration, interfacing, packaging, and sensing performance at point-of-care (POC) has rendered diagnostics according to the requirements of disease management and patient disease profile i.e. in a personalized manner. Efforts are continuously being made to promote the state of art biosensing technology as a next-generation non-invasive disease diagnostics methodology. Keeping this in view, this progressive opinion article describes personalized health care management related analytical tools which can provide access to better health for everyone, with overreaching aim to manage healthy tomorrow timely. Considering accomplishments and predictions, such affordable intelligent diagnostics tools are urgently required to manage COVID-19 pandemic, a life-threatening respiratory infectious disease, where a rapid, selective and sensitive detection of human beta severe acute respiratory system coronavirus (SARS-COoV-2) protein is the key factor.     

New phenylethanoid glycosides from Bacopa monniera

Three new phenylethanoid glycosides, viz. monnierasides I-III (1-3) along with the known analogue plantainoside B were isolated from the glycosidic fraction of Bacopa monniera. Their structures were elucidated mainly on the basis of two dimensional (2D) NMR spectral analyses.     

Chitosan–iron oxide nanobiocomposite based immunosensor for ochratoxin-A

The rabbit immunoglobulin antibodies (IgGs) have been immobilized onto nanobiocomposite film of chitosan (CH)–iron oxide (Fe₃O₄₎ nanoparticles prepared onto indium–tin oxide (ITO) electrode for detection of ochratoxin-A (OTA). Excellent film forming ability and availability of –NH₂ group in CH and affinity of surface charged Fe₃O₄ nanoparticles for oxygen support the immobilization of IgGs. Differential pulse voltammettry (DPV) studies indicate that Fe₃O₄ nanoparticles provide increased electroactive surface area for loading of IgGs and improved electron transport between IgGs and electrode. IgGs/CH–Fe₃O₄ nanobiocomposite/ITO immunoelectrode exhibits improved characteristics such as low detection limit (0.5 ng dL⁻¹), fast response time (18 s) and high sensitivity (36 μA/ng dL⁻¹ cm⁻²) with respect to IgGs/CH/ITO immunoelectrode.     

Effect of formic acid addition on water cluster stability and structure

Computational chemistry simulations were performed to determine the effect that the addition of a single formic acid molecule has on the structure and stability of protonated water clusters. Previous experimental studies showed that addition of formic acid to protonated pure water results in higher intensities of large-sized clusters when compared to pure water and methanol-water mixed clusters. For larger, protonated clusters, molecular dynamics simulations were performed on H(+)(H(2)O)(n), H(+)(H(2)O)(n)CH(3)OH, and H(+)(H(2)O)(n)CHOOH clusters, 19-28 molecules in size, using a reactive force field (ReaxFF). Based on these computations, formic acid-water clusters were found to have significantly higher binding energies per molecule. Addition of formic acid to a water cluster was found to alter the structure of the hydrogen-bonding network, creating selective sites within the cluster, enabling the formation of new hydrogen bonds, and increasing both the stability of the cluster and its rate of growth.