Kinetics and mechanism of the Co(II)-assisted oxidation of thioureas by dioxygen

Catalytic oxidation of N,N'-dimethylthiourea and thiourea by dioxygen in water using a new cobalt(II) complex of octasulfophenyltetrapyrazinoporphyrazine was performed under mild conditions. The reaction is shown to include the formation of an intermediate anionic five-coordinate complex followed by an unusual two-electron oxidation to produce the corresponding urea and elemental sulfur (S8). Kinetic and thermodynamic parameters for the different reaction steps of the process were determined. Drastic differences in catalytic activity of cobalt and iron octasulfophenyltetrapyrazinoporphyrazines were observed.     

Aqueous dispersions of single-wall and multiwall carbon nanotubes with designed amphiphilic polycations

Poor solubility of single-walled and multiwalled carbon nanotubes (NTs) in water and organic solvents presents a considerable challenge for their purification and applications. Macromolecules can be convenient solubilizing agents for NTs and a structural element of composite materials for them. Several block copolymers with different chemical functionalities of the side groups were tested for the preparation of aqueous NT dispersions. Poly(N-cetyl-4-vinylpyridinium bromide-co-N-ethyl-4-vinylpyridinium bromide-co-4-vinylpyridine) was found to form exceptionally stable NT dispersions. It is suggested that the efficiency of macromolecular dispersion agents for NT solubilization correlates with the topological and electronic similarity of polymer-NT and NT-NT interactions in the nanotube bundles. Raman spectroscopy and atomic force and transmission electron microcopies data indicate that the polycations are wrapped around NTs forming a uniform coating 1.0-1.5 nm thick. The ability to wind around the NT originates in the hydrophobic attraction of the polymer backbone to the graphene surface and topological matching. Tetraalkylammonium functional groups in the side chains of the macromolecule create a cloud of positive charge around NTs, which makes them hydrophilic. The prepared dispersions could facilitate the processing of the nanotubes into composites with high nanotube loading for electronic materials and sensing. Positive charge on their surface is particularly important for biological and biomedical applications because it strengthens interactions with negatively charged cell membranes. A high degree of spontaneous bundle separation afforded by the polymer coating can also be beneficial for NT sorting.     

Thermal lens spectrometric determination of hexavalent chromium

The applicability of thermal lens spectrometry (TLS) for quantification and routine determination of hexavalent chromium was investigated by using a collinear dual beam thermal lens spectrometer. In aqueous solutions the LOD of 0.1 μg l⁻¹ was obtained for Cr(VI) by using 160 mW laser power. The performance of the technique was verified by the determination of hexavalent chromium in standard reference water samples (NIST SRM 1643a and NIST SRM 1643c) and comparing the results for Cr(VI) in CCA (Cr, Cu, As)-treated timber extracts to concentrations obtained by atomic absorption spectrometry (AAS). Good agreement between the TLS results and reported values for Cr(VI) in SRMs as well as AAS results for Cr(VI) in CCA-treated timbers confirmed that TLS is a reliable and accurate analytical technique applicable for the determination of Cr(VI) in aqueous solutions at concentration levels 0.5–100 μg l⁻¹.     

Effect of group II metal cations on catecholate oxidation.

The unexpected effects of Ca(2+) on the free-radical chain reactions of dopamine, norepinephrine, isoproterenol, and pyrocatechol oxidation are studied using oxygen consumption measurements, EPR-spectroscopy, UV/VIS spectrophotometry, and by potentiometric titration. It is found that the formation of Ca(2+)-catecholate complexes is accompanied by an increase in the dissociation constants (K(ai) ) of their phenolic hydroxyls. At pH>pK(ai) and in the presence of alkaline-earth metal cations, the rate of catecholate oxidation increases (Ca(2+), Mg(2+)> Sr(2+), Ba(2+)), whereas on addition of Zn ions the rate decreases. The effects of Group II metal cations on catecholate autoxidation are concomitant with a transient increase of the EPR signal for metal-semiquinonate complexes. Therefore, the effects of Ca(2+) and other alkaline-earth metal cations on catecholate autoxidation can be defined as 1) additional deprotonation of catechol OH-groups involved in the formation of M(2+)-catecholate complexes, the latter exceeding catechols in the susceptibility to dioxygen-induced oxidation and 2) formation of relatively stable free-radical intermediates responsible for chain propagation.     

Importance of micellar kinetics in relation to technological processes

The association of many classes of surface-active molecules into micellar aggregates is a well-known phenomenon. Micelles are in dynamic equilibrium, constantly disintegrating and reforming. This relaxation process is characterized by the slow micellar relaxation time constant, tau(2), which is directly related to the micellar stability. Theories of the kinetics of micelle formation and disintegration have been discussed to identify the gaps in our complete understanding of this kinetic process. The micellar stability of sodium dodecyl sulfate micelles has been shown to significantly influence technological processes involving a rapid increase in interfacial area, such as foaming, wetting, emulsification, solubilization, and detergency. First, the available monomers adsorb onto the freshly created interface. Then, additional monomers must be provided by the breakup of micelles. Especially when the free monomer concentration is low, which is the case for many nonionic surfactant solutions, the micellar breakup time is a rate-limiting step in the supply of monomers. The Center for Surface Science & Engineering at the University of Florida has developed methods using stopped flow and pressure jump with optical detection to determine the slow relaxation time of micelles of nonionic surfactants. The results showed that the ionic surfactants such as SDS exhibit slow relaxation times in the range from milliseconds to seconds, whereas nonionic surfactants exhibit slow relaxation times in the range from seconds (for Triton X-100) to minutes (for polyoxyethylene alkyl ethers). The slow relaxation times are much longer for nonionic surfactants than for ionic surfactants, because of the absence of ionic repulsion between the head groups. The observed relaxation times showed a direct correlation with dynamic surface tension and foaming experiments. In conclusion, relaxation time data of surfactant solutions correlate with the dynamic properties of the micellar solutions. Moreover, the results suggest that appropriate micelles with specific stability or tau(2) can be designed by controlling the surfactant structure, concentration, and physicochemical conditions (e.g., salt concentration, temperature, and pressure). One can also tailor micelles by mixing anionic/cationic or ionic/nonionic surfactants for a desired stability to control various technological processes.     

Structure, bonding, and reactivity of Ti and Zr amidate complexes: DFT and X-ray crystallographic studies

Easily prepared and highly modular organic amide proligands have been used to synthesize a series of new bis(amidate)-bis(amido) Ti and Zr complexes via protonolysis. These complexes have been structurally characterized by NMR spectroscopy and X-ray crystallography. The solid-state molecular structures of these complexes indicate that the amidate ligands bind to the metal centers in an exclusively bidentate fashion, resulting in discrete monomeric species. Geometric isomerism in these species is highly dependent upon the steric characteristics of the proligands utilized in the synthesis. In solution, these complexes are observed to isomerize on the NMR time scale, with one isomer being predominant. Bonding in the bis(amidate)-bis(amido) complexes was investigated by DFT calculations. The geometric isomers predicted by theory matched the experimentally observed results, within experimental error. The orbitals associated with amidate-metal bonding are energetically well below the frontier orbitals. The HOMO in these complexes is a pi orbital associated with amido ligand-to-metal bonding character, while the LUMO in all cases is a vacant d orbital on the metal center.     

Relaxation dynamics in glycerol-water mixtures: I. Glycerol-rich mixtures

We discuss the relaxation dynamics of glycerol-water mixtures, as studied by dielectric spectroscopy in the frequency range from 1 Hz to 250 MHz and at temperatures between 173 and 323 K. The experimental results obtained for the glycerol-rich mixtures suggest that the main dielectric relaxation process, as well as the so-called high-frequency "excess wing" (EW) and dc conductivity, follow the same temperature dependence. This result indicates that all of these processes are induced by the same molecular origin. A new phenomenological function is proposed to describe the whole dielectric spectrum in the covered frequency range, and some possible mechanisms of dielectric behaviors through the dc conductivity, the main relaxation process, and the EW are discussed.     

Neurosteroid analogues: synthesis of 6-aza-allopregnanolone

An efficient synthesis of 6-azapregnane derivatives and their biological activity is described. The nitrogen was introduced into the B ring using Beckmann rearrangement of the (E)-oxime of 6-oxo-B-nor-5α-pregnane derivatives. The required 3α-hydroxyl was produced either by solvolysis of the corresponding 3β-mesyloxy group or by the Meerwein-Ponndorf-Verley reduction of the 3-oxo group; this reduction could be carried out selectively with an unprotected 3,20-dioxo derivative. The binding of the 6-aza-steroids to the γ-aminobutyric acid receptor (GABA_A) was measured using [³⁵S]-tert-butyl-bicyclo[2.2.2]phosphorothionate (TBPS) and [³H]flunitrazepam. The only analogue to be slightly active was that lacking any oxygen function in position 3.     

Path integral Monte Carlo simulation of the absorption spectra of an Al atom embedded in helium

We use a multilevel path integral Monte-Carlo (PIMC) method to simulate the arrangement of He atoms around a single Al atom doped in a He cluster. High-level ab initio Al-He pair potentials and a Balling and Wright pairwise Hamiltonian model are used to describe the full potential and the electronic asymmetry arising from the open-shell character of the Al atom in its ground and excited electronic states. Our calculations show that the doping of the Al 3p electron strongly influences the He packing. The results of the PIMC simulation are used to predict the electronic excitation spectrum of an Al atom embedded in He clusters. With inclusion of tail corrections for the ground and excited states potentials, the calculated 3d<--3p spectrum agrees reasonably well with the experimental spectrum. The blueshift of the calculated spectrum associated with the 4s<--3p transition of solvated Al is about 25 nm (2000 cm-1) larger than seen in experiments on Al embedded in bulk liquid He. We predict that the spectrum associated with the 4p<--3p transition will be blueshifted by approximately 7000 cm-1 (nearly 1 eV).