Rh-doped SrTiO3 photocatalyst electrode showing cathodic photocurrent for water splitting under visible-light irradiation

A Rh-doped SrTiO(3) (SrTiO(3):Rh) photocatalyst electrode that was readily prepared by pasting SrTiO(3):Rh powder onto a transparent indium tin oxide electrode gave a cathodic photocurrent under visible-light irradiation (λ > 420 nm), indicating that the SrTiO(3):Rh photocatalyst electrode possessed p-type semiconductor character. The cathodic photocurrent increased with an increase in the amount of doped Rh up to 7 atom %. The incident-photon-to-current efficiency at 420 nm was 0.18% under an applied potential of -0.7 V vs Ag/AgCl for the SrTiO(3):Rh(7 atom %) photocatalyst electrode. The photocurrent was confirmed to be due to water splitting by analyzing the evolved H(2) and O(2). The water splitting proceeded with the application of an external bias smaller than 1.23 V versus a Pt counter electrode under visible-light irradiation and also using a solar simulator, suggesting that solar energy conversion should be possible with the present photoelectrochemical water splitting.     

A risk assessment of human ether-a-go-go-related gene potassium channel inhibition by using lipophilicity and basicity for drug discovery

The blockade of human ether-a-go-go-related gene (hERG) potassium channels is widely regarded as the predominant cause of drug-induced QT prolongation. The correlation analysis between the inhibition of the hERG channel (hERG inhibition) and physicochemical properties was investigated by use of in-house quinolone antibiotics as model compounds. In order to establish a simple prediction model of hERG inhibition, we focused on the comprehensible physicochemical parameters such as lipophilicity (log P) and basicity (pK(a)). At first, the risk associated with increasing log P and pK(a) was examined by statistical analysis. It was demonstrated that the risk associated with increasing log P and pK(a) by one unit, respectively, almost identically increased. Consequently, equal attention should be paid to both parameters on hERG inhibition. Next, a prediction model of hERG inhibition which was represented by log P and pK(a) was investigated. As a result, we built the stepwise discriminant prediction model which took advantage of the risk judgment by zone classification. In conclusion, the impact of log P and pK(a) on hERG inhibition was clarified relatively and quantitatively. The quantitative risk assessment established based on both parameters, was considered to be a practical and useful tool in avoiding hERG inhibition and in the rational drug design for drug discovery, especially in lead optimization. Moreover, we also carried out a trend analysis using a different derivative and demonstrated that both parameters were equally significant for hERG inhibition.     

Liquid phase formation of alkyl- and perfluoro-phosphonic acid derived monolayers on magnesium alloy AZ31 and their chemical properties

Alkyl- and perfluoro-phosphonic acid derived SAMs were successfully formed on Mg alloy by liquid phase method for the first time. The chemical and anticorrosive properties of the prepared SAMs on magnesium alloys were characterized using contact angle measurements, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and electrochemical measurements. Water contact angle measurements revealed that the maximum advancing/receding water contact angles of n-octyl (OP: CH(3)(CH(2))(7)PO(OH)(2)), n-dodecyl (DP: CH(3)(CH(2))(11)PO(OH)(2)), n-octadecyl (ODP: CH(3)(CH(2))(17)PO(OH)(2)) phosphonic acid, and 2-(perfluorohexyl)ethyl (PFEP: CF(3)(CF(2))(5)CH(2)CH(2)PO(OH)(2)) phosphonic acid were 105.1/64.7°, 108.3/69.6°, 111.9/75.2°, and 115.2/67.4° respectively. In the case of alkylphosphonic acid SAMs (OP, DP, and ODP), the advancing and receding water contact angles increased with an increase in the preparation time. The angle-resolved XPS (AR-XPS) data revealed that the film thicknesses of the OP, DP, ODP, PFEP on Mg alloy were estimated to be 0.8, 1.2, 1.7, and 1.1 nm, respectively. The XPS O 1s data support that the phosphonic acid derived SAM is covalently bound to the oxide or hydroxide surface of the Mg alloy in a monodenate or bidenate manner. Chemical stability of the alkyl- and perfluoro-phosphonic acid modified Mg alloy surfaces was investigated using aqueous solutions at pH=4.0, 7.0, and 10.0. The contact angles of OP, DP, and PFEP modified Mg surface decreased rapidly within the first 5 min after immersion in all the aqueous solutions and were less than 20°. On the other hand, the contact angles of the ODP modified Mg alloy after immersion in aqueous solutions at pH 4, 7 and 10 for 5 min were 45.1°, 89.3,° and 85.5°, respectively. The ODP modified Mg alloy had highest chemical stability in four types of the phosphonic acid derived SAMs used in this study, indicating that the molecular density of ODP on Mg alloy would be higher than those of OP, DP, PFEP on Mg alloy. The corrosion resistance of ODP modified Mg alloy was investigated by potentiodynamic polarization curve measurements. The ODP modified Mg alloy exhibits protective properties in a solution containing Cl(-) ions compared to unmodified Mg alloy.     

Second Harmonic Generation in Bis Typed Organic Compounds

In systematic research on a series of new nonlinear organic materials, we found that Bis (4-nitrophenoxy) methane (BNPM) showed a large intensity of second harmonic light, which was 4.4 times as large as that of urea crystal by powder technique and easily crystallized from a solution. The crystal structure of BNPM, obtained by the X-ray diffraction method, was orthorhombic, space group P2₁2₁2 (point group 222), with unit-sell dimension a = 10.205 Å; b = 12.854 Å; c = 4.8822 Å. In addition, we found that the absorption edge of BNPM was 430 nm with a 0.9-mm-thick crystal, and we observed the second harmonic light with BNPM single crystal at the wavelength of 1064 nm and in the range from 906 nm to 990 nm.     

Preparation of magnetic nanoparticles by the use of self-assembled fluorinated oligomeric aggregates—A new approach to the dispersion of magnetic particles on poly(methyl methacrylate) film surface

Fluoroalkyl end-capped acrylic acid oligomer-encapsulated magnetic nanoparticles were prepared by the coprecipitation of aqueous ferric and ferrous ions in the presence of the corresponding oligomers under alkaline conditions. The dynamic light scattering measurements showed that these fluorinated oligomer magnetic nanoparticles were encapsulated in the self-assemblies of fluoroalkyl end-capped oligomers. Fluoroalkyl end-capped oligomer-encapsulated magnetic nanoparticles thus obtained were applied to the dispersion of magnetic particles on the poly(methyl methacrylate) film surface to exhibit not only the surface active property imparted by fluorine but also magnetic behavior toward a permanent magnet.     

Synthesis of Al–Cr decagonal quasicrystal nanoparticles and their temperature of phase transformation to stable crystal phase

The synthesis of Al–Cr single quasicrystal (QC) nanoparticles of the decagonal phase was achieved by introducing an advanced gas flow evaporation method. By obtaining successive electron diffraction patterns for single-QC nanoparticles, the phase transformation temperature of a single-QC nanoparticle was determined to be 700 °C. It was also determined that part of the QC nanoparticle decomposed into hex-Al₈Cr₅ and Al during the phase transformation. Since the grain growth did not occur during the phase transformation in the present experiment, the inherent phase transformation temperature could be measured.     

Some families of Mordell curves associated to cubic fields

We introduce some Mordell curves of two different natures both of which are associated to cubic fields. One set of them consists of those elliptic curves whose rational points over the rational number field are described by or closely related to cubic fields. The other is a one-parameter family of Mordell curves which gives all (cyclic) cubic twists and all quadratic twists of the Fermat curve X³+Y³+Z³=0.     

On the rearrangement in carbonyl oxide intermediates

Sensitized photooxidation of alkylphenyldiazomethanes under oxygen afforded, in addition to alkyl phenyl ketones, alkyl benzoates, which are probably formed by a rearrangement via dioxirane diradical.     

18O-tracer study on the rearrangement of carbonyl oxide intermediates to esters

A tracer study for the rearrangement of carbonyl oxides to esters using doubly-labeled oxygen lead to a conclusion that carbonyl oxides do not isomerize directly to dioxyranes and the rearrangement to esters proceeds via a cyclic tetroxide.