A study of the alumina-silica gel adsorbent for the removal of silicic acid from geothermal water: increase in adsorption capacity of the adsorbent due to formation of amorphous aluminosilicate by adsorption of silicic acid

Two kinds of adsorbents (Si adsorbent and Al adsorbent) for the removal of silicic acid from geothermal water to retard the formation of silica scales were prepared using silicic acid contained in geothermal water. The Si adsorbent was prepared by evaporating geothermal water, and the Al adsorbent was prepared by evaporating geothermal water after the addition of aluminum chloride. The specific surface area of the Si adsorbent was small and it's adsorption capacity of silicic acid was low. Although the specific surface area of the Al adsorbent was also small, it was significantly increased by the adsorption of silicic acid and it's adsorption capacity was high. Based on the change in the local structure of aluminum ion by the adsorption of silicic acid, the Al adsorbent was considered to be silica particles covered with crystalline aluminum hydroxide. Moreover, it was concluded that the increase in the specific surface area of the Al adsorbent and the decrease in the zeta potential were due to the formation of an amorphous aluminosilicate with a large surface area and a negative charge (one 4-coordinated Al) by the reaction between aluminum ions and silicic acids.     

Mechanistic action of ferric oxide in the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In the hydrosilylation of 1,6-divinyl(perfluorohexane) (FDV) with trichlorosilane (TCS) in the presence of catalytic chloroplatinic acid (Pt-Cat) under an air atmosphere (0.99 MPa), a runaway reaction accompanied by a severe pressure release occurred when Fe₂O₃ was present as an impurity in the system. In this study, we investigated the mechanism of action of Fe₂O₃ on this hydrosilylation by monitoring the thermal behavior of TCS/FDV/Pt-Cat/Fe₂O₃ mixtures with various compositions, using an accelerating rate calorimeter (ARC). In the case of TSC/FDV/Pt-Cat, a typical hydrosilylation composition in the industrial process, heat release, possibly due to hydrosilylation, began at 90 °C. On the other hand, for TCS/FDV/Pt-Cat/Fe₂O, the heat release due to hydrosilylation was hardly observed, but abrupt heat and pressure releases occurred at higher temperatures (>170 °C). Like TCS/FDV/Pt-Cat/Fe₂O₃, TCS/FDV, which contain neither Pt-Cat nor Fe₂O₃, released heat and pressure at high temperatures (>210 °C), while the heat and pressure release rates were comparatively low. From these results, the runaway reaction may occur when hydrosilylation is prevented, and Fe₂O₃ behaves as a negative catalyst for hydrosilylation. In the FT-IR spectrum of TCS/FDV/Pt-Cat/Fe₂O₃ after heating, an absorption peak at approximately 1,710 cm^?1, which may be attributed to a carbonyl group, was observed. Thus, it is considered that the runaway reaction observed during the hydrosilylation results from the action of Fe₂O₃ as a negative catalyst for hydrosilylation as well as as an oxidation catalyst for the by-product generated from the reaction between TCS and FDV.     

Determination of elemental and ionic compositions for diesel exhaust particles by particle induced X-ray emission and ion chromatography analysis.

The purpose of this study is to clarify the chemical characterization of PM2.5 and PM10 in diesel exhaust particles (DEP). Sampling of PM2.5 and PM10 in DEP was carried out in November 1999 using an automobile exhaust testing system at the National Traffic Safety and Environment Laboratory, with a diesel truck (engine type: direct injection, displacement: 7,961 cc, carrying weight: 2,020 kg, equivalent inertia weight: 5,600 kg) placed on a chassis dynamometer. Sampling conditions included idling, constant speed of 40 km/h, M-15 test pattern and 60%-revolution/40%-load of maximum power. Samples were collected on a polycarbonate membrane filter (Nuclepore, pore size: 0.8 microm) using a MiniVol Portable Air Sampler (Airmetrics Co., Inc.). The concentrations of several elemental and ionic species in the PM2.5 and PM10 samples were determined by particle induced X-ray emission (PIXE) and ion chromatography analysis. PIXE analysis of the PM2.5 and PM10 samples revealed 15 elements, of which Na, Mg, Si, S, Cl, Ca, Fe and Zn were found to be the major components. Ionic species were Cl-, NO2-, NO3-, SO4(2-), Na+, NH4+, K+ and Ca2+. Concentrations of elements and ionic species under the sampling condition of 60%-revolution/40%-load were highest in comparison with those of the other sampling conditions. The elemental and ionic species data were compared for PM2.5 and PM10; PM2.5 concentrations were 70% or more of PM10 concentrations for the majority of elements, and concentrations of ionic species in PM2.5 and PM10 were almost identical.     

Semiconductor-catalyzed photooxygenation of aromatic olefins

Irradiation of semiconductors (TiO₂ and CdS) suspended in organic solvents containing 1,1-diphenylethylene and its derivatives under oxygen afforded the corresponding epoxides and benzophenone. A possible mechanism is discussed.     

Photoelectron spectroscopic study of simple hydrogen-bonded dimers. I. Supersonic nozzle beam photoelectron spectrometer and the formic-acid dimer

In this paper we describe several characteristics of our supersonic nozzle beam photoelectron spectrometer recently constructed for studying hydrogen-bonded dimers in the gas phase by HeI (58.4 nm) radiation. Using this photoelectron apparatus, we have reinvestigated the HeI photoelectron spectrum of the formic-acid dimer (HCOOH)₂ which is well known as a fairly strong doubly hydrogen-bonded dimer. It was found that the (HCOOH)₂ spectrum deduced here from the spectrum of the monomer—dimer mixture considerably differs from that reported by Carnovale et al. in the region beyond 16.5 eV. New spectral assignments are given for four ionization bands beyond 16.5 eV. It is also indicated that the lower bound of the dissociation energy of (HCOOH)₂⁺ is estimated to be 1.0 ± 0.1 eV from the threshold of the dimer band (11.0 eV) obtained in this experiment. This value is considerably smaller than the value of 1.7 ± 0.2 eV recently reported for the water dimer cation (H₂O)₂⁺.     

Photoelectron spectra and sum rule consideration: Effect of chlorine substitution on ionization energies for chloroethanes,chloroacetaldehydes and chloroacetyl chlorides

He(I) photoelectron spectra are reported for various series of chlorine-substituted compounds: (a) CH₃CH_3?mCl_m, (b) CH_3?mCl_mCCl₃, (c) CH_3?mCl_mCHO and (d) CH_3?mCl_mCOCl, where m = 1, 2 and 3. In each series it is shown that the total sum of vertical ionization energies over all p-type localized molecular orbitals (LO's) has an excellent linear relationship to the number of substituted chlorine atoms. The differences in the total orbital energy sum by successive chlorine substitutions are found to be 26.7 eV for series a and b and 27.2 eV for series c and d, yielding the corresponding experimental σ_CCl, energies useful for sum rule considerations. The photoelectron spectra of the chloro compounds studied are interpreted with the help of the sum rule as well as CNDO/2 calculations. Orbital correlation diagrams have been constructed for these compounds.