Conjugate addition of grignard reagents to N-(α,β-unsaturated)acylpyrazoles. Diastereoselective β-alkylation using 3-phenyl-l-menthopyrazole

The conjugate additions of N-(α,β-unsaturated)acylpyrazoles were carried out by the treatment with Grignard reagents in the presence of cuprous halides. The reaction of 2-(α,β-unsaturated)acyl-3-phenyl-l-menthopyrazoles 3a-h occurred in higher chemical yields and with asymmetric inductions on β-position, where the addition of magnesium bromide as a Lewis acid influenced to the yields and the diastereoselectivities. In the case of α-methylated 2-(α,β-unsaturated)acyl-3-phenyl-l-menthopyrazoles 3i-n , the excellent asymmetric induction on the α-position was also observed through the diastereofacial protonation.     

A study of the alumina-silica gel adsorbent for the removal of silicic acid from geothermal water: increase in adsorption capacity of the adsorbent due to formation of amorphous aluminosilicate by adsorption of silicic acid

Two kinds of adsorbents (Si adsorbent and Al adsorbent) for the removal of silicic acid from geothermal water to retard the formation of silica scales were prepared using silicic acid contained in geothermal water. The Si adsorbent was prepared by evaporating geothermal water, and the Al adsorbent was prepared by evaporating geothermal water after the addition of aluminum chloride. The specific surface area of the Si adsorbent was small and it's adsorption capacity of silicic acid was low. Although the specific surface area of the Al adsorbent was also small, it was significantly increased by the adsorption of silicic acid and it's adsorption capacity was high. Based on the change in the local structure of aluminum ion by the adsorption of silicic acid, the Al adsorbent was considered to be silica particles covered with crystalline aluminum hydroxide. Moreover, it was concluded that the increase in the specific surface area of the Al adsorbent and the decrease in the zeta potential were due to the formation of an amorphous aluminosilicate with a large surface area and a negative charge (one 4-coordinated Al) by the reaction between aluminum ions and silicic acids.     

Rapid colorimetric determination of manganese in waters containing iron : A modification of the formaldoxime method

A rapid photometric method with formaldoxime is described for the determination of small amounts of manganese in waters containing iron. The iron formaldoxime formed is decomposed by addition of EDTA and hydroxylamine after development of the manganese-formaldoxime color. Beer's law holds up to 3 mg Mn/1. Up to 25 mg iron(II) or (III) per 1 can be tolerated.     

Close-packed C(70)(3-) phases - synthesis, structure, and electronic properties

The high symmetry and resulting electronic degeneracy of the C(60)(3)(-) anion is viewed as the key molecular feature in the high superconducting transition temperatures of fulleride and oxidized fullerene systems. The experimental evaluation of this hypothesis requires the synthesis of face-centered cubic (fcc) trivalent fulleride anion salts derived from higher fullerenes such as C(70), which have thus far proved elusive with only stable A(1)C(70), A(4)C(70), and A(6)C(70) phases known. In this paper, we report the synthesis of fcc A(3)C(70) phases stabilized by size-matching the tetrahedral site with the sodium cation. The structures are strongly dependent on the cooling protocol due to the existence of metastable partially or completely orientationally disordered phases. EPR data indicate that the phases are metallic but not superconducting. The densities of states at the Fermi level appear too low to give superconductivity at above 5 K, consistent with recent observations that four electrons per C(70) anion are required for superconductivity. Size-matching on both the octahedral and tetrahedral sites is required for A(3)C(70) stability - K(2)CsC(70) is only stable at elevated temperature and Na(2)C(70) is unstable, the composition corresponding to C(70) and a sodium-rich trigonal phase.     

Cloning, sequencing, and functional analysis of the biosynthetic gene cluster of macrolactam antibiotic vicenistatin in Streptomyces halstedii

Vicenistatin, an antitumor antibiotic isolated from Streptomyces halstedii, is a unique 20-membered macrocyclic lactam with a novel aminosugar vicenisamine. The vicenistatin biosynthetic gene cluster (vin) spanning approximately 64 kbp was cloned and sequenced. The cluster contains putative genes for the aglycon biosynthesis including four modular polyketide synthases (PKSs), glutamate mutase, acyl CoA-ligase, and AMP-ligase. Also found in the cluster are genes of NDP-hexose 4,6-dehydratase and aminotransferase for vicenisamine biosynthesis. For the functional confirmation of the cluster, a putative glycosyltransferase gene product, VinC, was heterologously expressed, and the vicenisamine transfer reaction to the aglycon was chemically proved. A unique feature of the vicenistatin PKS is that the loading module contains only an acyl carrier protein domain, in contrast to other known PKS-loading modules containing certain activation domains. Activation of the starter acyl group by separate polypeptides is postulated as well.     

Water cluster growth in hydrophobic solid nanospaces

The growth mechanism of water clusters in carbon nanopores is clearly elucidated by in situ small-angle X-ray scattering (SAXS) studies and grand canonical Monte Carlo (GCMC) simulations at 293-313 K. Water molecules are isolated from each other in hydrophobic nanopores below relative pressures (P/P(0)) of 0.5. Water molecules associate with each other to form clusters of about 0.6 nm in size at P/P(0)=0.6, accompanied by a remarkable aggregation of these clusters. The complete filling of carbon nanopores finishes at about P/P(0)=0.8. The correlation length analysis of SAXS profiles leads to the proposal of a growth mechanism for these water clusters and the presence of the critical cluster size of 0.6 nm leads to extremely stable clusters of water molecules in hydrophobic nanopores. Once a cluster of the critical size is formed in hydrophobic nanopores, the predominant water adsorption begins to fill carbon nanopores.     

KINETICS AND MECHANISM OF PHOTOCYCLOADDITION OF DEOXYURIDINES TO 2,3-DIMETHYL-2-BUTENE

The mechanism of photocycloaddition of 2′-deoxyuridine (1a) and thymidine (1b) to 2,3-dimethyl-2-butene (Bu) in acetonitrile by UV irradiation has been studied. The reciprocal quantum yield for the cycloaddition increased linearly with reciprocal concentrations of Bu in acetonitrile to give limiting quantum yields at infinite concentration of Bu as 0.030 and 0.0096 for 1a and 1b , respectively. This shows that the cycloaddition proceeds in a two-step mechanism between the triplet state of 1 and Bu through biradical intermediates. Addition of cis-1,3-pentadiene quenched the reaction obeying the Stern–Volmer equation. The above quenching experiments and laser transient spectroscopy revealed that the triplet state of 1a reacts with Bu with much larger rate constant (1.3–1.6 × 10⁹ M^?1 s^?1) than that of 1b (4–5 × 10⁷ M^?1 s^?1) reflecting larger steric hindrance exerted in the reaction of 1b than that of 1a .     

Internal radiocesium contamination of adults and children in Fukushima 7 to 20 months after the Fukushima NPP accident as measured by extensive whole-body-counter surveys

The Fukushima Dai-ichi NPP accident contaminated the soil of densely-populated regions in Fukushima Prefecture with radioactive cesium, which poses significant risks of internal and external exposure to the residents. If we apply the knowledge of post-Chernobyl accident studies, internal exposures in excess of a few mSv/y would be expected to be frequent in Fukushima.Extensive whole-body-counter surveys (n = 32,811) carried out at the Hirata Central Hospital between October, 2011 and November, 2012, however show that the internal exposure levels of residents are much lower than estimated. In particular, the first sampling-bias-free assessment of the internal exposure of children in the town of Miharu, Fukushima, shows that the ¹³⁷Cs body burdens of all children (n = 1,383, ages 6–15, covering 95% of children enrolled in town-operated schools) were below the detection limit of 300 Bq/body in the fall of 2012. These results are not conclusive for the prefecture as a whole, but are consistent with results obtained from other municipalities in the prefecture, and with prefectural data.     

Mechanistic action of ferric oxide in the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In the hydrosilylation of 1,6-divinyl(perfluorohexane) (FDV) with trichlorosilane (TCS) in the presence of catalytic chloroplatinic acid (Pt-Cat) under an air atmosphere (0.99 MPa), a runaway reaction accompanied by a severe pressure release occurred when Fe₂O₃ was present as an impurity in the system. In this study, we investigated the mechanism of action of Fe₂O₃ on this hydrosilylation by monitoring the thermal behavior of TCS/FDV/Pt-Cat/Fe₂O₃ mixtures with various compositions, using an accelerating rate calorimeter (ARC). In the case of TSC/FDV/Pt-Cat, a typical hydrosilylation composition in the industrial process, heat release, possibly due to hydrosilylation, began at 90 °C. On the other hand, for TCS/FDV/Pt-Cat/Fe₂O, the heat release due to hydrosilylation was hardly observed, but abrupt heat and pressure releases occurred at higher temperatures (>170 °C). Like TCS/FDV/Pt-Cat/Fe₂O₃, TCS/FDV, which contain neither Pt-Cat nor Fe₂O₃, released heat and pressure at high temperatures (>210 °C), while the heat and pressure release rates were comparatively low. From these results, the runaway reaction may occur when hydrosilylation is prevented, and Fe₂O₃ behaves as a negative catalyst for hydrosilylation. In the FT-IR spectrum of TCS/FDV/Pt-Cat/Fe₂O₃ after heating, an absorption peak at approximately 1,710 cm^?1, which may be attributed to a carbonyl group, was observed. Thus, it is considered that the runaway reaction observed during the hydrosilylation results from the action of Fe₂O₃ as a negative catalyst for hydrosilylation as well as as an oxidation catalyst for the by-product generated from the reaction between TCS and FDV.