Rapid colorimetric determination of manganese in waters containing iron : A modification of the formaldoxime method

A rapid photometric method with formaldoxime is described for the determination of small amounts of manganese in waters containing iron. The iron formaldoxime formed is decomposed by addition of EDTA and hydroxylamine after development of the manganese-formaldoxime color. Beer's law holds up to 3 mg Mn/1. Up to 25 mg iron(II) or (III) per 1 can be tolerated.     

Close-packed C(70)(3-) phases - synthesis, structure, and electronic properties

The high symmetry and resulting electronic degeneracy of the C(60)(3)(-) anion is viewed as the key molecular feature in the high superconducting transition temperatures of fulleride and oxidized fullerene systems. The experimental evaluation of this hypothesis requires the synthesis of face-centered cubic (fcc) trivalent fulleride anion salts derived from higher fullerenes such as C(70), which have thus far proved elusive with only stable A(1)C(70), A(4)C(70), and A(6)C(70) phases known. In this paper, we report the synthesis of fcc A(3)C(70) phases stabilized by size-matching the tetrahedral site with the sodium cation. The structures are strongly dependent on the cooling protocol due to the existence of metastable partially or completely orientationally disordered phases. EPR data indicate that the phases are metallic but not superconducting. The densities of states at the Fermi level appear too low to give superconductivity at above 5 K, consistent with recent observations that four electrons per C(70) anion are required for superconductivity. Size-matching on both the octahedral and tetrahedral sites is required for A(3)C(70) stability - K(2)CsC(70) is only stable at elevated temperature and Na(2)C(70) is unstable, the composition corresponding to C(70) and a sodium-rich trigonal phase.     

Cloning, sequencing, and functional analysis of the biosynthetic gene cluster of macrolactam antibiotic vicenistatin in Streptomyces halstedii

Vicenistatin, an antitumor antibiotic isolated from Streptomyces halstedii, is a unique 20-membered macrocyclic lactam with a novel aminosugar vicenisamine. The vicenistatin biosynthetic gene cluster (vin) spanning approximately 64 kbp was cloned and sequenced. The cluster contains putative genes for the aglycon biosynthesis including four modular polyketide synthases (PKSs), glutamate mutase, acyl CoA-ligase, and AMP-ligase. Also found in the cluster are genes of NDP-hexose 4,6-dehydratase and aminotransferase for vicenisamine biosynthesis. For the functional confirmation of the cluster, a putative glycosyltransferase gene product, VinC, was heterologously expressed, and the vicenisamine transfer reaction to the aglycon was chemically proved. A unique feature of the vicenistatin PKS is that the loading module contains only an acyl carrier protein domain, in contrast to other known PKS-loading modules containing certain activation domains. Activation of the starter acyl group by separate polypeptides is postulated as well.     

Water cluster growth in hydrophobic solid nanospaces

The growth mechanism of water clusters in carbon nanopores is clearly elucidated by in situ small-angle X-ray scattering (SAXS) studies and grand canonical Monte Carlo (GCMC) simulations at 293-313 K. Water molecules are isolated from each other in hydrophobic nanopores below relative pressures (P/P(0)) of 0.5. Water molecules associate with each other to form clusters of about 0.6 nm in size at P/P(0)=0.6, accompanied by a remarkable aggregation of these clusters. The complete filling of carbon nanopores finishes at about P/P(0)=0.8. The correlation length analysis of SAXS profiles leads to the proposal of a growth mechanism for these water clusters and the presence of the critical cluster size of 0.6 nm leads to extremely stable clusters of water molecules in hydrophobic nanopores. Once a cluster of the critical size is formed in hydrophobic nanopores, the predominant water adsorption begins to fill carbon nanopores.     

KINETICS AND MECHANISM OF PHOTOCYCLOADDITION OF DEOXYURIDINES TO 2,3-DIMETHYL-2-BUTENE

The mechanism of photocycloaddition of 2′-deoxyuridine (1a) and thymidine (1b) to 2,3-dimethyl-2-butene (Bu) in acetonitrile by UV irradiation has been studied. The reciprocal quantum yield for the cycloaddition increased linearly with reciprocal concentrations of Bu in acetonitrile to give limiting quantum yields at infinite concentration of Bu as 0.030 and 0.0096 for 1a and 1b , respectively. This shows that the cycloaddition proceeds in a two-step mechanism between the triplet state of 1 and Bu through biradical intermediates. Addition of cis-1,3-pentadiene quenched the reaction obeying the Stern–Volmer equation. The above quenching experiments and laser transient spectroscopy revealed that the triplet state of 1a reacts with Bu with much larger rate constant (1.3–1.6 × 10⁹ M^?1 s^?1) than that of 1b (4–5 × 10⁷ M^?1 s^?1) reflecting larger steric hindrance exerted in the reaction of 1b than that of 1a .     

Y-931, a novel atypical antipsychotic drug,is less sensitive to oxidative phenomena

The oxidation behavior of Y-931, a potent atypical antipsychotic drug, was compared with that of clozapine and olanzapine. In two enzymatic systems (horseradish peroxidase (HRP)/glutathione (GSH) and HRP/H(2)O(2)/GSH) which generate thiyl radicals, clozapine markedly strengthened the electron paramagnetic resonance (EPR) signal for the radical. Olanzapine, Y-931 and the major metabolites (compounds 1-3) had no or minimal effect on the intensity of this signal. In addition, the redox potential values for the three derivatives were in accord with the EPR spin trapping results. In toxicological experiments in human leukocytes, a concentration-dependent toxicity was observed when neutrophils were incubated with clozapine (1-10 micromol/l) and H(2)O(2) (1 mmol/l). However, Y-931 and olanzapine did not show remarkable toxicity under the conditions.     

NMR Study of Vulcanized Rubber

It is shown that NMR-linewidth measurements are useful to obtain information about the cross-linkage density and the average distance between the cross-links in vulcanized rubber. Inhomogeneous structure of the rubber phase in carbon-filled rubber is evidenced and the thickness of the rubber layer on carbon is evaluated at 50 Å.     

CO2 laser drives extreme ultraviolet nano-lithography — second life of mature laser technology

It was shown both theoretically and experimentally that nanosecond order laser pulses at 10.6 micron wavelength were superior for driving the Sn plasma extreme ultraviolet (EUV) source for nano-lithography for the reasons of higher conversion efficiency, lower production of debris and higher average power levels obtainable in CO₂ media without serious problems of beam distortions and nonlinear effects occurring in competing solid-state lasers at high intensities. The renewed interest in such pulse format, wavelength, repetition rates in excess of 50 kHz and average power levels in excess of 18 kiloWatt has sparked new opportunities for a matured multi-kiloWatt CO₂ laser technology. The power demand of EUV source could be only satisfied by a Master-Oscillator-Power-Amplifier system configuration, leading to a development of a new type of hybrid pulsed CO₂ laser employing a whole spectrum of CO₂ technology, such as fast flow systems and diffusion-cooled planar waveguide lasers, and relatively recent quantum cascade lasers. In this paper we review briefly the history of relevant pulsed CO₂ laser technology and the requirements for multi-kiloWatt CO₂ laser, intended for the laser-produced plasma EUV source, and present our recent advances, such as novel solid-state seeded master oscillator and efficient multi-pass amplifiers built on planar waveguide CO₂ lasers.     

Synthesis of ZrO<Subscript>2</Subscript> nanoparticles for liquid scintillators used in the detection of neutrinoless double beta decay

We synthesized liquid scintillators incorporating ZrO₂ nanoparticles for application in neutrinoless double beta decay experiments. ZrO₂ nanoparticles of less than 10 nm in size were synthesized with sub- and supercritical hydrothermal methods. The Zr concentrations in the liquid scintillators were determined to be up to 1.4 wt% with inductively coupled plasma analysis, and the liquid scintillators were transparent to scintillation. These results indicate that these methods are applicable for the preparation of liquid scintillators for neutrinoless double beta decay experiments.