Über die Phosphidierung des Nickels durch Phosphortrichlorid

On the Phosphidation of Nickel by Phosphorus Trichloride The phosphidation of nickel sheets by phosphorus trichloride vapor of 30 and 50 Torr has been studied kinetically by gravimetric means in the temperature range of 400–650°C in hydrogen atmosphere. The phosphidation proceeded generally according to the parabolic rate law. The parabolic rate constant increased with an increase of temperature, and its temperature dependence yielded the activation energies of about 33 and 47 kcal/mole for 400–550 and 550–650°C, respectively. X-ray and electron microprobe analyses showed that surfaces of the specimens phosphidized are made up of mixtures of Ni₂P and Ni₆P₅, and that at the phosphide/metal interface the compound Ni₂P is formed. The experiments using argon as carrier gas resulted in the formation of both the phosphides and the chlorides, and this fact could be explained in terms of thermodynamics.     

Addition reactions of cyclooctatetraene with 1,3-diphenylisobenzofuran the benzene ring as dienophile in a [4+2] cycloaddition reaction

Addition reactions of cyclooctatetraene with 1,3-diphenylisobenzofuran resulted in the formation of three 1:1 cycloadducts, 1, 2, and 3, and a 1:2 cycloadduct, 4. Single crystal x-ray analysis established 3 to be a cage compound formed by an unprecedented [4+2] cycloaddition reaction of 1 in which the double bond of the benzene moiety acted as the dienophile.     

Polycyclic N-hetero compounds. XXVII. Synthesis and investigation of the antidepressive activity of a B-Homo-11,13,15-triazasteroid and its related compoundsd

A synthesis of 1,2,5,6-tetrahydro-4H-benzo[3,4]cyclohepta[1,2-e]imidazo[1,2-c]pyrimidine (XII) having a novel ring system is described. Antidepressive activity of XII and its precursors VII-X was screened by inhibitory action of reserpine-induced hypothermia.     

Determination of sultopride and tiapride in serum by gas chromatography using a surface ionisation detector

A sensitive and selective method has been developed for the determination of sultopride and tiapride in serum using gas chromatography with a surface ionisation detector. No interfering peaks from endogenous substances were observed. The method showed good reproducibility and accuracy, and the standard curve was linear up to 2 micrograms/ml with a correlation coefficient of 0.999. This method is applicable to pharmacokinetic studies and therapeutic drug monitoring of sultopride and tiapride.     

A New Synthetic Route to (±)-Perhydrohistrionicotoxin

Starting from ethyl 2-cyclohexen-1-carboxylate ( 3 ) the total synthesis of the perhydrohistrionicotoxin intermediate 23 was achieved in 25% overall-yield. The two key steps involve a positionally specific addition of HOBr to the oxime-olefin 7 and the alkylation of bromooxime 17 with 1-lithio-1-butyne. The latter represents a novel method for stereospecific and position-specific introduction of a nucleophilic butyl equivalent in α-position to a ketonic carbonyl group.     

Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.     

Synthesis of poly(benzoxazole)s by direct polycondensation of dicarboxylic acids with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(benzoxazole)s of high molecular weights has been developed. These polymers were prepared readily by direct polycondensation of aromatic dicarboxylic acids containing phenyl either structure with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid (PPMA) as condensing agent and solvent. Polycondensations proceeded fast and was completed within 5 h at 140°C and produced poly(benzoxazole)s with inherent viscosities up to 4.6 dL/g. Model compound work was performed in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(benzoxazole)s showed 10% weight loss in air and nitrogen at 450–505°C and 465–535°C, respectively.     

High pressure and high temperature investigations in the system MgOSiO2H2O

The system MgOSiO₂H₂O was investigated at pressures between 40 and 95 kbar and at temperatures between 500 and 1400°C. The reaction products were examined by X-ray, optical and thermal analysis techniques and the density of phase A discovered by Ringwood and Major was also measured. It was found that phase A was hydrated and its chemical formula was H₆Mg₇Si₂O₁₄. When the $\text{Mg}\text{Si}$ ratio of the system is 2, phase A + clinoenstatite, and forsterite are stable at temperatures lower and higher than a boundary curve T (°C) = 10P (kbar), respectively. When the $\text{Mg}\text{Si}$ ratio of the system is 3, phase A + phase D (which is completely different from the phases, A, B and C discovered by Ringwood and Major, and any other known phases of magnesium silicate) and phase D + brucite are stable at temperatures lower and higher than a boundary curve T(°C) = 10P (kbar) + 200. Phase A has approximately an hexagonal symmetry and the space group and the lattice parameters are determined as P6₃ or $\text{P6}{}_3\text{m}$ and a = 7.866(2) Å and c = 9.600(3) Å, respectively. The measured density is 2.96 ± 0.02 g/cm³. The optical observations show that phase A is biaxial positive crystal with refractive indices α = 1.638 ± 0.001, β = 1.640 ± 0.002, and γ = 1.649 ± 0.001. Some interpretation is given on the inconsistency between the symmetry determined by the X-ray diffraction and the optical observation. The new phase D belongs to the space group $\text{P2}{}_1\text{c}$ with lattice parameters a = 7.914(2)Å, b = 4.752(1) Å, c = 10.350(2) Å and β = 108.71(5)° and is a biaxial crystal with refractive indices α = 1.630 ± 0.002, β = 1.642 ± 0.002 and γ = 1.658 ± 0.001.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.