Hydrophobic and electrostatic interactions in the adsorption of fibronectin at maleic acid copolymer films

Adsorption and desorption of fibronectin (FN) were investigated at thin films of alternating maleic acid copolymers with octadecene (POMA) and with propene (PPMA). The hydrophobicity and charge density of the polymers were modulated by the choice of the comonomer. In consequence, the dominant forces between the substrate and the protein were specified as hydrophobic interaction for POMA and electrostatic interaction for PPMA. The adsorption kinetics were investigated in situ as variations of the optical thickness, adsorbed mass, and viscoelastic properties (detected by reflectometric interference spectroscopy and quartz crystal microbalance technique, respectively) while alterations of the electrosurface properties were derived from surface conductivity data and isoelectric points (by streaming potential/current measurements using a microslit electrokinetic setup). The results demonstrate that the interfacial mode of adsorbed FN depends on the predominant interactions: large amounts of FN were tightly bound to POMA by hydrophobic interactions. In contrast, FN adsorbed on PPMA was concluded to attain an unfolded structure allowing for the "electrostatic matching" of positively charged residues on FN with the maleic acid groups. This conclusion was supported by the acidic IEP of 3.2 found for FN on PPMA and a significant reduction of the surface conductivity of the FN-covered polymer film, whereas FN on POMA showed an IEP of 4.2 (close to the intrinsic IEP of FN), indicating a stochastic orientation of the adsorbed protein.     

Low bending loss and effectively single-mode all-solid photonic bandgap fiber with an effective area of 650 μm2

A large-mode-area all-solid photonic bandgap fiber with a seven-cell core and five high-index rod rings is investigated. Numerical simulations show that an effective area of more than 500 μm(2), a bending loss of less than 0.1 dB/m at a bending radius of 10 cm and effectively single-mode operation can be achieved simultaneously. A core diameter of 44.8 μm and an effective area of 650 μm(2) at 1064 nm are achieved in a fabricated fiber. Bending loss at 1064 nm is 0.09 dB/m at a bending radius of 7 cm. Effectively single-mode operation is also realized at a bending radius of 10 cm.     

Hamiltonian cycles in n-factor-critical graphs

A graph G is said to be n-factor-critical if G−S has a 1-factor for any SV(G) with |S|=n. In this paper, we prove that if G is a 2-connected n-factor-critical graph of order p with , then G is hamiltonian with some exceptions. To extend this theorem, we define a (k,n)-factor-critical graph to be a graph G such that G−S has a k-factor for any SV(G) with |S|=n. We conjecture that if G is a 2-connected (k,n)-factor-critical graph of order p with , then G is hamiltonian with some exceptions. In this paper, we characterize all such graphs that satisfy the assumption, but are not 1-tough. Using this, we verify the conjecture for k2.     

Alternative optimality criteria of portfolio selection based upon threshold stopping rule

This paper proposes two types of alternative criteria of optimality for the continuous time portfolio selection problem. The optimality criteria, the so–called Laplace–Stieltjes transform (LST) criteria, are based on the assumption that the financial agent has a target level for the wealth accumulation process. These criteria are closely related to the so–called threshold stopping investment rule. We analytically derive the LST criteria and numerically compare them with the well–known Kelly criterion. It is shown that the portfolio strategies suggested may overcome the problem that the growth portfolio is often overestimated in several investment situations.     

Influence of 4‐fluorophenyl pendants in thieno[3,4‐b]thiophene‐benzo[1,2‐b:4,5‐b′]dithiophene‐based polymers on the performance of photovoltaics

Polymers consisting of benzo[1,2‐b:4,5‐b′]dithiophene and thieno[3,4‐b]thiophene units (PTB‐based polymers), either fully or partially containing 4‐fluorophenyl pendants, are synthesized as electron donor materials for inverted‐type polymer solar cells (PSCs). The influence of the 4‐fluorophenyl pendant content on the thermal and optical properties, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), the hole mobilities, and photovoltaic performances are investigated. As the 4‐fluorophenyl pendant content increased, the HOMO and LUMO of the polymers were deepened proportionally and the open‐circuit voltages of the PSCs improved. Incorporation of 4‐fluorophenyl pendants into the polymers also affected the crystallinity, orientation, and compatibility with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester in the active layers, leading to nonlinearities in the short‐circuit current densities, and fill factors. The incorporation of an appropriate number of 4‐fluorophenyl pendants enhanced the power conversion efficiencies of the PSC devices from 2.25 to 3.96% for identical device configurations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1586–1593     

Hydrogen bonding between aromatic H and F groups leading to a stripe structure with R‐ and S‐columns: the crystal structure of (2,7‐dimethoxynaphthalen‐1‐yl)(3‐fluorophenyl)methanone and comparison with its 1‐aroylnaphthalene analogues

In the molecule of (2,7‐dimethoxynaphthalen‐1‐yl)(3‐fluorophenyl)methanone, C₁₉H₁₅FO₃, (I), the dihedral angle between the plane of the naphthalene ring system and that of the benzene ring is 85.90 (5)°. The molecules exhibit axial chirality, with either an R‐ or an S‐stereogenic axis. In the crystal structure, each enantiomer is stacked into a columnar structure and the columns are arranged alternately to form a stripe structure. A pair of (methoxy)C—H...F hydrogen bonds and π–π interactions between the benzene rings of the aroyl groups link an R‐ and an S‐isomer to form a dimeric pair. These dimeric pairs are piled up in a columnar fashion through (benzene)C—H...O=C and (benzene)C—H...OCH₃ hydrogen bonds. The analogous 1‐benzoylated compound, namely (2,7‐dimethoxynaphthalen‐1‐yl)(phenyl)methanone [Kato et al. (2010). Acta Cryst. E 66 , o2659], (II), affords three independent molecules having slightly different dihedral angles between the benzene and naphthalene rings. The three independent molecules form separate columns and the three types of column are connected to each other via two C—H...OCH₃ hydrogen bonds and one C—H...O=C hydrogen bond. Two of the three columns are formed by the same enantiomeric isomer, whereas the remaining column consists of the counterpart isomer. In the case of the fluorinated 1‐benzoylated naphthalene analogue, namely (2,7‐dimethoxynaphthalen‐1‐yl)(4‐fluorophenyl)methanone [Watanabe et al. (2011). Acta Cryst. E 67 , o1466], (III), the molecular packing is similar to that of (I), i.e. it consists of stripes of R‐ and S‐enantiomeric columns. A pair of C—H...F hydrogen bonds between R‐ and S‐isomers, and C—H...O=C hydrogen bonds between R(or S)‐isomers, are also observed. Consequently, the stripe structure is apparently induced by the formation of R...S dimeric pairs stacked in a columnar fashion. The pair of C—H...F hydrogen bonds effectively stabilizes the dimeric pair of R‐ and S‐enantiomers. In addition, the co‐existence of C—H...F and C—H...O=C hydrogen bonds makes possible the formation of a structure with just one independent molecule.     

Determination of unique amino acid substitutions in protein variants by peptide mass mapping with FT-ICR MS

Peptide mass mapping plays a central role in the structural characterization of protein variants with single amino acid substitutions. Among the 20 standard amino acids found in living organisms, 18, all but Leu and Ile, differ from each other in molecular mass. The mass differences between amino acids range from 0.0364 to 129.0578 Da. The mass of the mutated peptide or the difference between normal and mutated peptides uniquely determines the type of substitution in some cases, and even pinpoints the position of the mutation when the involved residue is found only once in the peptide. Among 75 pairs of amino acid residues that are exchangeable via a single nucleotide replacement, 53 show specific change in exact mass, while only 25 in nominal mass. On the other hand, precise measurement, at least to the third decimal place, greatly enhances the capacity of the peptide mass mapping strategy for structural characterization. This notion was verified by an analysis of three Hb variants using MALDI-FTICR MS. In addition, the baseline resolution of two 1 kDa peptides with a single amino acid difference, Lys or Gln, which have the smallest (0.0364 Da) difference among residues, was achieved by measurement at a mass resolving power of 342,000. The results indicated that the smallest difference, 0.0040 Da between [Delta29.9742 for Glu-Val] and [Delta29.9782 for Trp-Arg], among all types of amino acid substitutions derived from a single nucleotide replacement can be discriminated at the present performance level. Therefore, FTICR MS is capable of identifying all 53 types of substitutions, each of which is associated with a unique mass difference, except for the Leu and Ile isomers.