Preferential utilization of glucose over melibiose, and vice versa, in a pts mutant of Salmonella typhimurium.

Preferential utilization of glucose and melibiose was investigated in wild type cells and in pts mutant (ptsI-leaky) cells of Salmonella typhimurium. A typical diauxic growth and preferential utilization of glucose over melibiose were observed in wild type cells when these two sugars were added as carbon source. Similar results were obtained with a pts mutant (SB1476) although utilization of glucose was slow. When cyclic adenosine 3',5'-monophosphate (cAMP) was added to the culture medium to release the catabolite repression, preferential utilization of glucose was still observed in wild type cells. With glucose-induced mutant cells, preferential utilization of glucose was observed in the presence of cAMP. Gradual utilization of melibiose took place when glucose concentration in the medium decreased. Surprisingly, preferential utilization of melibiose over glucose was observed with melibiose-induced and glucose-uninduced mutant cells in the presence of cAMP.     

An effective method for the synthesis of the cap structure of eukaryotic messenger ribonucleic acids

A new promising “capping agent” (9) was synthesized by use of a lipophilic amino protecting group and an activatable pyrophosphate protecting group. This agent reacted homogeneously with 5′_5′-nucleotides in the presence of AgNO₃ to afford the cap structures (m7G pppNu).     

The use of multi-element stable isotope analysis to monitor the origin of chondroitin sulfates

Continuous-flow isotope ratio mass spectrometry (CF-IRMS) of deuterium, carbon, nitrogen, oxygen and sulfur has been used to analyse samples of pure chondroitin sulfates from known animal sources (shark, squid, salmon, pig and bovine). There is a need to control the origin of this dietary supplement, which is extracted from several types of animals: for traditional, ethical, or economic reasons, a given source of natural products of animal origin can be preferred to another, and can therefore have a different price. Twenty-three samples collected in Europe and Asia were analysed by IRMS. The results, especially the isotopic deviations of sulphur, oxygen and deuterium, show a significant discrimination between marine and terrestrial origins of this compound which will provide a convenient and efficient way to control the declared sources in the market. The differences observed between origins are further discussed.     

STATIC QUENCHING OF EXCITED STATE OF TRIS(BIPYRIDINE)RUTHENIUM(II) COMPLEX-CONTAINING POLYMER BY SODIUM ANTHRAQUINONE-2-SULFONATE

Abstract— Quenching of excited state of Ru(bpy)₂(poly-4-methyl-4'-vinyl-2,2'-bipyridine)Cl₂ by sodium anthraquinone-2-sulfonate was found to be a static process. The quenching was interpreted by application of a modified Perrin model. Radius of the quenching sphere was estimated to correspond to 6.65 monomer units and was unchanged on varying the Ru²+ content of the polymer. Energy migration along the polymer chain was denied.     

Cell surface-anchored fluorescent aptamer sensor enables imaging of chemical transmitter dynamics

A fluorescent aptamer sensor was applied to the analysis of extracellular chemical transmitter dynamics. We utilized a tocopherol-labeled aptamer, which allowed the direct anchoring of the fluorescent aptamer on the cell surface while retaining its performance as a fluorescent sensor. The fast-responsive fluorescent DNA aptamer sensor, which targets adenine compounds, was anchored on the surface of brain astrocytes. Fluorescence imaging of the aptamer-anchored astrocytes enabled the real-time monitoring of release of adenine compounds as a gliotransmitter, which was synchronized with calcium wave propagation in neighboring cells.     

Hydrophobic and electrostatic interactions in the adsorption of fibronectin at maleic acid copolymer films

Adsorption and desorption of fibronectin (FN) were investigated at thin films of alternating maleic acid copolymers with octadecene (POMA) and with propene (PPMA). The hydrophobicity and charge density of the polymers were modulated by the choice of the comonomer. In consequence, the dominant forces between the substrate and the protein were specified as hydrophobic interaction for POMA and electrostatic interaction for PPMA. The adsorption kinetics were investigated in situ as variations of the optical thickness, adsorbed mass, and viscoelastic properties (detected by reflectometric interference spectroscopy and quartz crystal microbalance technique, respectively) while alterations of the electrosurface properties were derived from surface conductivity data and isoelectric points (by streaming potential/current measurements using a microslit electrokinetic setup). The results demonstrate that the interfacial mode of adsorbed FN depends on the predominant interactions: large amounts of FN were tightly bound to POMA by hydrophobic interactions. In contrast, FN adsorbed on PPMA was concluded to attain an unfolded structure allowing for the "electrostatic matching" of positively charged residues on FN with the maleic acid groups. This conclusion was supported by the acidic IEP of 3.2 found for FN on PPMA and a significant reduction of the surface conductivity of the FN-covered polymer film, whereas FN on POMA showed an IEP of 4.2 (close to the intrinsic IEP of FN), indicating a stochastic orientation of the adsorbed protein.     

Alternative optimality criteria of portfolio selection based upon threshold stopping rule

This paper proposes two types of alternative criteria of optimality for the continuous time portfolio selection problem. The optimality criteria, the so–called Laplace–Stieltjes transform (LST) criteria, are based on the assumption that the financial agent has a target level for the wealth accumulation process. These criteria are closely related to the so–called threshold stopping investment rule. We analytically derive the LST criteria and numerically compare them with the well–known Kelly criterion. It is shown that the portfolio strategies suggested may overcome the problem that the growth portfolio is often overestimated in several investment situations.     

Influence of 4‐fluorophenyl pendants in thieno[3,4‐b]thiophene‐benzo[1,2‐b:4,5‐b′]dithiophene‐based polymers on the performance of photovoltaics

Polymers consisting of benzo[1,2‐b:4,5‐b′]dithiophene and thieno[3,4‐b]thiophene units (PTB‐based polymers), either fully or partially containing 4‐fluorophenyl pendants, are synthesized as electron donor materials for inverted‐type polymer solar cells (PSCs). The influence of the 4‐fluorophenyl pendant content on the thermal and optical properties, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), the hole mobilities, and photovoltaic performances are investigated. As the 4‐fluorophenyl pendant content increased, the HOMO and LUMO of the polymers were deepened proportionally and the open‐circuit voltages of the PSCs improved. Incorporation of 4‐fluorophenyl pendants into the polymers also affected the crystallinity, orientation, and compatibility with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester in the active layers, leading to nonlinearities in the short‐circuit current densities, and fill factors. The incorporation of an appropriate number of 4‐fluorophenyl pendants enhanced the power conversion efficiencies of the PSC devices from 2.25 to 3.96% for identical device configurations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1586–1593     

Hydrogen bonding between aromatic H and F groups leading to a stripe structure with R‐ and S‐columns: the crystal structure of (2,7‐dimethoxynaphthalen‐1‐yl)(3‐fluorophenyl)methanone and comparison with its 1‐aroylnaphthalene analogues

In the molecule of (2,7‐dimethoxynaphthalen‐1‐yl)(3‐fluorophenyl)methanone, C₁₉H₁₅FO₃, (I), the dihedral angle between the plane of the naphthalene ring system and that of the benzene ring is 85.90 (5)°. The molecules exhibit axial chirality, with either an R‐ or an S‐stereogenic axis. In the crystal structure, each enantiomer is stacked into a columnar structure and the columns are arranged alternately to form a stripe structure. A pair of (methoxy)C—H...F hydrogen bonds and π–π interactions between the benzene rings of the aroyl groups link an R‐ and an S‐isomer to form a dimeric pair. These dimeric pairs are piled up in a columnar fashion through (benzene)C—H...O=C and (benzene)C—H...OCH₃ hydrogen bonds. The analogous 1‐benzoylated compound, namely (2,7‐dimethoxynaphthalen‐1‐yl)(phenyl)methanone [Kato et al. (2010). Acta Cryst. E 66 , o2659], (II), affords three independent molecules having slightly different dihedral angles between the benzene and naphthalene rings. The three independent molecules form separate columns and the three types of column are connected to each other via two C—H...OCH₃ hydrogen bonds and one C—H...O=C hydrogen bond. Two of the three columns are formed by the same enantiomeric isomer, whereas the remaining column consists of the counterpart isomer. In the case of the fluorinated 1‐benzoylated naphthalene analogue, namely (2,7‐dimethoxynaphthalen‐1‐yl)(4‐fluorophenyl)methanone [Watanabe et al. (2011). Acta Cryst. E 67 , o1466], (III), the molecular packing is similar to that of (I), i.e. it consists of stripes of R‐ and S‐enantiomeric columns. A pair of C—H...F hydrogen bonds between R‐ and S‐isomers, and C—H...O=C hydrogen bonds between R(or S)‐isomers, are also observed. Consequently, the stripe structure is apparently induced by the formation of R...S dimeric pairs stacked in a columnar fashion. The pair of C—H...F hydrogen bonds effectively stabilizes the dimeric pair of R‐ and S‐enantiomers. In addition, the co‐existence of C—H...F and C—H...O=C hydrogen bonds makes possible the formation of a structure with just one independent molecule.