Synthesis of poly(2,5-dimethylphenylene sulfide) through oxidative polymerization of sulfur chloride with p-xylene

Poly(2,5-dimethylphenylene sulfide) was prepared by oxidative polymerization of sulfur chloride with p-xylene using 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) as an oxidizing agent. The reaction proceeded efficiently under atmospheric pressure and at room temperature. The polymer formed had a high melting temperature and linear structure which was confirmed by spectroscopies. The effects of reaction time, solvent, temperature and oxidizing agent on polymerization are also discussed.     

Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

CYP119 plus a Sulfolobus tokodaii strain 7 ferredoxin and 2-oxoacid:ferredoxin oxidoreductase constitute a high-temperature cytochrome P450 catalytic system

The cytochrome P450 superfamily of enzymes catalyzes a broad range of oxidative processes involved in the metabolism of fatty acids, biosynthesis of sterols, and elimination of drugs and xenobiotics. Application of the unique properties of P450 enzymes as fine biocatalysts in biotechnology is limited due to their thermal instability and the requirement for auxiliary electron-donor proteins and cofactors. CYP119, a thermophilic P450 enzyme from Sulfolobus solfataricus, was characterized some time ago, but no high-temperature redox partners have been available for it. Here we report reconstitution of CYP119 with a novel high-temperature electron-donor system consisting of a ferredoxin and 2-oxoacid:ferredoxin oxidoreductase from Sulfolobus tokodaii strain 7 that, unlike all other known P450 electron-donor partners, utilizes coenzyme-A and pyruvic acid rather than NADH or NADPH as the source of electrons. The oxidation of lauric acid by the reconstituted system increased 16-fold as the temperature increased from 25 to 70 degrees C and was functional for more than 30 min at the higher temperature. This first in vitro high-temperature P450 catalytic system is a key step in the development of practical high-temperature monooxygenase systems.     

Photometric determination of micro amounts of thiosulphate by means of its cyanolysis with lanthanum(III) as catalyst

Lanthanum(III) has been found to catalyse the reaction of thiosulphate with cyanide. The effects of pH, reaction time and temperature, amount of cyanide and lanthanum, and order of addition of reagents have been investigated. Temperature has little effect in the range 10–30°, but at both 35° and 40° the rate is noticeably faster. Reaction is complete at room temperature in 1.5 hr at pH 9.3–9.6, and in 3 hr at pH 9.1–9.6. The method can be applied to the determination of 1.0 × 10⁻⁵−6.0 × 10⁻⁴M thiosulphate, with a relative standard deviation of 0.3% for 4 × 10⁻⁴M thiosulphate.     

Layer-by-layer assembled multilayer films of titanate nanotubes, Ag- or Au-loaded nanotubes, and nanotubes/nanosheets with polycations

Aqueous suspensions of hydrothermally synthesized titanate nanotubes and poly(diallyldimethylammonium chloride) (PDDA) have been employed to fabricate multilayer films on various substrates in a layer-by-layer fashion. Atomic force microscopy displays the dense coverage of the substrate surface by the nanotubes. UV-vis absorption spectroscopy confirms the consecutive growth of PDDA/nanotube layer pairs. Single crystalline Ag and Au nanoparticles with narrow size distribution spatially correlating with the nanotubes have been obtained by treating the nanotubes with AgNO(3) or HAuCl(4) aqueous solution followed by chemical reduction. The noble metal nanoparticles show a strong surface plasmon absorption band. A multilayer film construction of the noble-metal-loaded nanotubes has also been achieved. This process has been further extended to the heteroassembly of nanotubes/nanosheets in different layer sequences.     

Gas-phase generation of highly reactive hexatriyne-bridged [6n]paracyclophynes

[6n]Paracyclophenediynes 2a-d (n = 3-6) having [4.3.2]propellatriene units were prepared as precursors of the corresponding [6n]paracyclophynes. Laser irradiation of 2a-d produced the negative ions of [6n]paracyclophynes 1a-d (n = 3-6) by extrusion of the indan fragments, which were detected by time-of-flight mass spectrometry.     

Two Polymorphs of (Anilinium)(18-Crown-6)[Ni(dmit)2]: Structure and Magnetic Properties

Two polymorphs of monovalent [Ni(dmit)₂]⁻ (dmit²⁻=2-thioxo-1,3-dithiole-4,5-dithiolate) crystals A and B, (anilinium)(18-crown-6)[Ni(dmit)₂], were prepared, and the structure and magnetic properties were investigated. In these crystals, the [Ni(dmit)₂]⁻ molecules form dimers, which arranged into chains between the supramolecular cation structure (anilinium)(18-crown-6). In crystal A, supramolecular cation formed a regular stack, inducing ladder structure of [Ni(dmit)₂], whose magnetism had been well fitted by spin ladder equation with the spin gap of Δ=190 K. Crystal B is ca. 3% more densely packed compared to crystal A. Due to the dense packing, supramolecular cation stack is distorted, which prevented the intermolecular interaction between [Ni(dmit)₂]⁻ dimers in direction corresponds to the ladder-leg direction in crystal A. Reflecting the [Ni(dmit)₂]⁻ arrangement, crystal B showed a temperature dependence of magnetic susceptibility well reproduced by the singlet-triplet thermal activation model, whose antiferromagnetic exchange interaction (2J) was 140 K.     

Nitrogen atom insertion into Ir-S and C-S bonds initiated by photolysis of iridium(III)-azido-dithiocarbamato complexes

Photolysis of acetonitrile solutions of Cp*Ir(R2dtc)(N3) [Cp* = eta5-C5Me5, R2dtc = S2CNR2; R = Me (1) or Et (1')] at temperatures below 0 degrees C afford five-coordinate complexes Cp*Ir{NSC(NR2)S} (2 or 2'), where a nitrogen atom has been inserted into one of the Ir-S bonds. In solution, complex 2 thermally convert to the azaethene-1,2-dithiolate complex, Cp*Ir[SN=C(NMe2)S] (3), which could be crystallized as the corresponding dimer, {Cp*Ir[mu-SN=C(NMe2)S-kappa3S:S,S']}2 (4). As a result, a nitrogen atom that originated in the azide ligand is transferred into a C-S bond of the dithiocarbamate.     

Cobalt(III) complexes of monodentate N9-bound adeninate (ade-), [Co(ade-kappaN9)Cl(en)2]+ (en = 1,2-diaminoethane): syntheses, crystal structures, and protonation behaviors of the geometrical isomers

In acidic aqueous solution, a cobalt(III) complex containing monodentate N(9)-bound adeninate (ade(-)), cis-[Co(ade-kappaN(9))Cl(en)(2)]Cl (cis-[1]Cl), underwent protonation to the adeninate moiety without geometrical isomerization or decomposition of the Co(III) coordination sphere, and complexes of cis-[CoCl(Hade)(en)(2)]Cl(2) (cis-[2]Cl(2)) and cis-[Co(H(2)ade)Cl(en)(2)]Cl(3) (cis-[3]Cl(3)) could be isolated. The pK(a) values of the Hade and H(2)ade(+) complexes are 6.03(1) and 2.53(12), respectively, at 20 degrees C in 0.1 M aqueous NaCl. The single-crystal X-ray analyses of cis-[2]Cl(2).0.5H(2)O and cis-[3]Cl(2)(BF(4)).H(2)O revealed that protonation took place first at the adeninate N(7) and then at the N(1) atoms to form adenine tautomer (7H-Hade-kappaN(9)) and cationic adeninium (1H,7H-H(2)ade(+)-kappaN(9)) complexes, respectively. On the other hand, addition of NaOH to an aqueous solution of cis-[1]Cl afforded a mixture of geometrical isomers of the hydroxo-adeninato complex, cis- and trans-[Co(ade-kappaN(9))(OH)(en)(2)](+). The trans-isomer of chloro-adeninato complex trans-[Co(ade-kappaN(9))Cl(en)(2)]BF(4) (trans-[1]BF(4)) was synthesized by a reaction of cis-[2](BF(4))(2) and sodium methoxide in methanol. This isomer in acidic aqueous solution was also stable toward isomerization, affording the corresponding adenine tautomer and adeninium complexes (pK(a) = 5.21(1) and 2.48(9), respectively, at 20 degrees C in 0.1 M aqueous NaCl). The protonated product of trans-[Co(7H-Hade-kappaN(9))Cl(en)(2)](BF(4))(2).H(2)O (trans-[2](BF(4))(2).H(2)O) could also be characterized by X-ray analysis. Furthermore, the hydrogen-bonding interactions of the adeninate/adenine tautomer complexes cis-[1]BF(4), cis-[2](BF(4))(2), and trans-[2](BF(4))(2) with 1-cyclohexyluracil in acetonitrile-d(3) were investigated by (1)H NMR spectroscopy. The crystal structure of trans-[Co(ade)(H(2)O)(en)(2)]HPO(4).3H(2)O, which was obtained by a reaction of trans-[Co(ade)(OH)(en)(2)]BF(4) and NaH(2)PO(4), was also determined.