Second-harmonic generation with a high-index-clad waveguide

Theoretical and experimental analyses of second-harmonic generation (SHG) with a high-index-clad waveguide are reported. It was found that confinement of the propagation modes and the overlap between the fields of fundamental and second-harmonic waves could be increased in this waveguide. This structure was achieved in an x-cut MgO:LiNbO (3) quasi-phase-matched (QPM) waveguide by use of Nb(2)O(5) as a cladding layer. With the QPM SHG device, harmonic blue light of 5.5 mW at the 434-nm wavelength was generated with a normalized conversion efficiency of 1200%/W cm(2).     

Discovery of temperature-dependent phenomena of muon-catalyzed fusion in solid deuterium and tritium mixtures

A systematic experimental study on muon-catalyzed fusion was conducted using a series of solid deuterium and tritium mixtures. A variety of conditions were investigated, i.e., tritium concentrations from 20% to 70%, and temperatures from 5 to 16 K. With decreasing temperature, we observed an unexpected decrease in the muon cycling rate (lambda(c)) and an increase in the muon loss probability (W). The origins of these observed changes were interpreted by the temperature-dependence in the dt mu formation process for lambda(c) and that in the muon reactivation process after muon-to-alpha sticking for W.     

Tensor analyzing power T 20 of the dd → 3Hen and dd → 3Hp reactions at zero angle for energies 140, 200, and 270 MeV

RIKEN Accelerator Research Facility data on the tensor analyzing power T ₂₀ of the dd → ³Hen and dd → ³Hp reactions at zero angle for deuteron kinetic energies of 140, 200, and 270 MeV are reported. The observed positive sign of T ₂₀ clearly demonstrates the sensitivity to the D/S-wave ratio in the ³He and ³H wave functions in the energy range of the experiment. Data on T ₂₀ for the ³Hen channel are in agreement with those for the ³Hp channel within the experimental errors.     

Quasi-particle excitations around a pair of half-quantum vortices in p- wave superconductors

Triplet superconductors such as Sr₂RuO₄ and Na_xCoO₂⋅yH₂O are now found to be p-wave (p_x ± ip_y) or f-wave ((p_x ± ip_y) cos cp_z) superconductors. It was phenomenologically suggested that in these p-wave or f-wave superconductors, a pair of half-quantum vortices (HQVs) becomes stable. Using the Bogoliubov-de Gennes equation, previously we have analyzed quasi-particle excitations around an HQV at one end of a d-soliton for simplicity. In next study, we will investigate the stability of the pair of HQV’s, which are connected by the d-soliton. For this purpose, we have developed a new numerical method to solve the Bogoliubov-de Gennes equation for two vortices state, using Mathieu functions.     

Ion extraction from the surface ablated materials in electric fields using an intense femtosecond laser pulse

In order to develop a femtosecond laser ablation (fsLA) ion source for TOF mass spectrometry, we have analyzed time-resolved images of laser-induced fluorescence from Sm⁺ ions produced by fsLA of a solid samarium in electric fields. The polarity and the strength of electric fields had a remarkable effect on the expansion of Sm⁺ ions. Moreover, accelerating electric fields elongated the duration of the ion emission from the samarium surface in fsLA, which degraded time-focusing of the ions. We have found that suppression the continuous ion emission caused by fsLA in electric fields is most important in TOF measurements.     

VLS Growth of ITO Whiskers Prepared by the Electron Shower Method

Indium tin oxide (ITO) whiskers were grown by VLS (vapour-liquid-solid) mechanism, using the electron shower method. The whiskers were grown above 200 °C, and the deposition rate was above 0.6 nm/s. The electron shower controlled the size of the whiskers, and the size was 30 nm in diameter and 600 nm in length. The whiskers grew along the substrate at t < 300 s, but grew in a direction perpendicular to the substrate at t > 300 s. When the ITO whiskers grown along the substrate were used as NO₂ gas sensor, the sensitivity was 340, and about 300 times higher than those of the whiskers grown in a direction perpendicular to the substrate and plate-like ITO crystallites.     

Study of the thermal degradability of poly(α-methylstyrene) with modified end groups

To induce degradabilities in polymers in response to environmental conditions, endm odification reactions of poly(α-methylstyrene) (PMS) derivatives were carried out. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(p-tolyl)allyl bromide, and α-trifluoromethylstyrene were found to be suitable end-modification agents. For example, the ω-2-phenylallyl-PMS derivative was prepared with almost quantitative functionality by the reaction of the living PMS derivative with 2-phenylallyl bromide. In a similar way, ω-3,3-difluoro-2-phenylallyl- and ω-2-(4-toly)allyl-PMS derivatives were synthesized. Based on thermogravimetric analysis, the onset of the degradation temperature of the endmodified PMS derivatives decreased in the following order: ω-hydrogen- > ω-3,3-difluoro-2-phenylallyl- > ω-2-phenylallyl- > ω-2-(p-tolyl)allyl-PMS. Actually, the onset temperature of ω-2-(p-tolyl)allyl-PMS derivatives was 50°C lower than that of ω-H-PMS derivatives. These results indicate that the active species is produced effectively at the endunsaturated bond, which initiates depolymerization of the polymer at rather low temperatures. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through a radical mechanism.     

Simultaneous detection of ammonia and humidity using transmission surface plasmon resonance technique

Abstract

Gas sensing by using the transmission surface plasmon resonance (T-SPR) technique was demonstrated. Polyacrylic acid (PAA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor A) responded to ammonia; however, it exhibited a strong humidity dependence. Polyvinyl alcohol (PVA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor B) as the sensing material was also prepared and it mainly responded to humidity. The T-SPR properties of Sensors A and B were observed simultaneously by a stacking arrangement that enabled us to obtain the responses by using a single spectrophotometer. The ammonia concentration under various humidity conditions could be accurately obtained by simultaneous measurement of Sensors A and B.