Batch versus Flow Photochemistry: A Revealing Comparison of Yield and Productivity

The use of flow photochemistry and its apparent superiority over batch has been reported by a number of groups in recent years. To rigorously determine whether flow does indeed have an advantage over batch, a broad range of synthetic photochemical transformations were optimized in both reactor modes and their yields and productivities compared. Surprisingly, yields were essentially identical in all comparative cases. Even more revealing was the observation that the productivity of flow reactors varied very little to that of their batch counterparts when the key reaction parameters were matched. Those with a single layer of fluorinated ethylene propylene (FEP) had an average productivity 20 % lower than that of batch, whereas three‐layer reactors were 20 % more productive. Finally, the utility of flow chemistry was demonstrated in the scale‐up of the ring‐opening reaction of a potentially explosive [1.1.1] propellane with butane‐2,3‐dione.     

Quadratic autocatalysis with non-linear decay

We provide a detailed, and thorough, investigation into the concentration multiplicity and dynamic stability of a prototype non-linear chemical mechanism: quadratic autocatalysis subject to non-linear decay in a continuously stirred tank reactor. This model was previously investigated in the literature using numerical path-following techniques. The contribution of this study is the application of singularity theory and degenerate Hopf-bifurcation theory to obtain analytical representations of many of the features of interest in this system. In particular, we use these presentations to identify critical values of an unfolding parameter below which specified phenomenon are no longer exhibited.     

Morphological regimes of poly(ε-caprolactone)/octaisobutyl polyhedral oligosilsesquioxane composite films in relation to film composition and thickness

The morphological evolution of poly(ε-caprolactone) (PCL)/octaisobutyl polyhedral oligomeric silsesquioxane (IBUPOSS) films was analyzed using scanning electron microscopy (SEM) and polarized optical microscopy (POM). The morphologies of the blend films with PCL/IBUPOSS mass ratios of 95:5 to 50:50 were discussed according to decomposition mechanism in relation to film composition and thickness. In addition to the morphological regime for films with lower IBUPOSS loadings, in which the growth of PCL spherulites was nearly independent on the presence of fine IBUPOSS aggregates, two new morphological regimes were observed for the films with higher IBUPOSS loadings: (1) thicker blend films exhibited a rich dynamics, giving rise to a trilayer structure and (2) the decomposition of thinner films was induced by the kinetically controlled growth of IBUPOSS aggregates. By varying the thickness and the composition of the blend films, the current study provides important new insight into the rich phase behavior of nanoparticle-filled polymer films.     

Stapled Peptides as HIF-1α/p300 Inhibitors: Helicity Enhancement in the Bound State Increases Inhibitory Potency

Protein–protein interactions (PPIs) control virtually all cellular processes and have thus emerged as potential targets for development of molecular therapeutics. Peptide-based inhibitors of PPIs are attractive given that they offer recognition potency and selectivity features that are ideal for function, yet, they do not predominantly populate the bioactive conformation, frequently suffer from poor cellular uptake and are easily degraded, for example, by proteases. The constraint of peptides in a bioactive conformation has emerged as a promising strategy to mitigate against these liabilities. In this work, using peptides derived from hypoxia-inducible factor 1 (HIF-1α) together with dibromomaleimide stapling, we identify constrained peptide inhibitors of the HIF-1α/p300 interaction that are more potent than their unconstrained sequences. Contrary to expectation, the increased potency does not correlate with an increased population of an α-helical conformation in the unbound state as demonstrated by experimental circular dichroism analysis. Rather, the ability of the peptide to adopt a bioactive α-helical conformation in the p300 bound state is better supported in the constrained variant as demonstrated by molecular dynamics simulations and circular dichroism difference spectra.     

Non-fickian diffusion in thin polymer films

Diffusion of penetrants through polymers often does not follow the standard Fickian model. Such anomalous behavior can cause difficulty when designing polymer networks for specific uses. One type of non-Fickian behavior that results is so-called case II diffusion, where Fickian-like fronts initially move like √t with a transition to a non-Fickian concentration profile and front speed for moderate time. A mathematical model is presented that replicates this behavior in thin polymer films, and an analysis is performed that yields relevant dimensionless groups for study. An unusual result is derived: In certain parameter ranges, the concentration profile can change concavity, reflecting Fickian behavior for short times and non-Fickian behavior for moderate times. Asymptotic and numerical results are then obtained to characterize the dependence of such relevant quantities as failure time, front speed, and mass transport on these dimensionless groups. This information can aid in the design of effective polymer protectant films. © 1996 John Wiley & Sons, Inc.     

Networks of rigid molecules

Networks of rigid molecules do not fit into the paradigm of classical theories of rubber elasticity. Some experimental properties of rigid polyamide networks are summarised, and the basis for a theoretical understanding of such systems is discussed and elaborated in terms of the properties such as the existence of several conformational states and twist of such network elements.     

Secondary metabolites produced by fungi derived from a microbial mat encountered in an iron-rich natural spring

A collection of fungal isolates was obtained from a complex microbial mat, which occupied an iron-rich freshwater spring that feeds into Clear Creek, Golden, Colorado, USA. Two of the fungal isolates, a Glomeromycete (possibly Entrophospora sp.) and a Dothideomycete (possibly Phaeosphaeria sp.), were investigated for bioactive secondary metabolites. In total, six new compounds consisting of clearanols A-E (5, 6, 10-12) and disulochrin (7) were purified and their structures were determined. Disulochrin exhibited modest antibacterial activity against methicillin-resistant Staphylococcus aureus, whereas clearanol C showed weak inhibitory activity against Candida albicans biofilm formation.     

The Direct Synthesis of Hydrogen Peroxide Using Platinum‐Promoted Gold–Palladium Catalysts

The direct synthesis of hydrogen peroxide offers a potentially green route to the production of this important commodity chemical. Early studies showed that Pd is a suitable catalyst, but recent work indicated that the addition of Au enhances the activity and selectivity significantly. The addition of a third metal using impregnation as a facile preparation method was thus investigated. The addition of a small amount of Pt to a CeO₂‐supported AuPd (weight ratio of 1:1) catalyst significantly enhanced the activity in the direct synthesis of H₂O₂ and decreased the non‐desired over‐hydrogenation and decomposition reactions. The addition of Pt to the AuPd nanoparticles influenced the surface composition, thus leading to the marked effects that were observed on the catalytic formation of hydrogen peroxide. In addition, an experimental approach that can help to identify the optimal nominal ternary alloy compositions for this reaction is demonstrated.     

Alteration of foliar flavonoid chemistry induced by enhanced UV-B radiation in field-grown Pinus ponderosa, Quercus rubra and Pseudotsuga menziesii

Chromatographic analyses of foliage from several tree species illustrate the species-specific effects of UV-B radiation on both quantity and composition of foliar flavonoids. Pinus ponderosa, Quercus rubra and Pseudotsuga menziesii were field-grown under modulated ambient (1x) and enhanced (2x) biologically effective UV-B radiation. Foliage was harvested seasonally over a 3-year period, extracted, purified and the flavonoid fraction applied to a mu Bondapak/C(18) column HPLC system sampling at 254 nm. Total flavonoid concentrations in Quercus rubra foliage were more than twice (leaf area basis) that of the other species; Pseudotsuga menziesii foliage had intermediate levels and P. ponderosa had the lowest concentrations of total flavonoids. No statistically significant UV-B radiation-induced effects were found in total foliar flavonoid concentrations for any species; however, concentrations of specific compounds within each species exhibited significant treatment effects. Higher (but statistically insignificant) levels of flavonoids were induced by UV-B irradiation in 1- and 2-year-old P. ponderosa foliage. Total flavonoid concentrations in 2-year-old needles increased by 50% (1x ambient UV-B radiation) or 70% (2x ambient UV-B radiation) from that of 1-year-old tissue. Foliar flavonoids of Q. rubra under enhanced UV-B radiation tended to shift from early-eluting compounds to less polar flavonoids eluting later. There were no clear patterns of UV-B radiation effects on 1-year-old P. menziesii foliage. However, 2-year-old tissue had slightly higher foliar flavonoids under the 2x UV-B radiation treatment compared to ambient levels. Results suggest that enhanced UV-B radiation will alter foliar flavonoid composition and concentrations in forest tree species, which could impact tissue protection, and ultimately, competition, herbivory or litter decomposition.