Selective holographic detection of glucose using tertiary amines

Introducing tertiary amine monomers into holographic sensors containing phenylboronic acids gives greatly improved selectivity for glucose.     

Raman spectroscopic monitoring of droplet polymerization in a microfluidic device

Microfluidic methodologies are becoming increasingly important for rapid formulation and screening of materials, and development of analytical tools for multiple sample screening is a critical step in achieving a combinatorial 'lab on a chip' approach. This work demonstrates the application of Raman spectroscopy for analysis of monomer composition and degree of conversion of methacrylate-based droplets in a microfluidic device. Droplet formation was conducted by flow focusing on the devices, and a gradient of component composition was created by varying the flow rates of the droplet-phase fluids into the microchannels. Raman data were collected using a fiber optic probe from a stationary array of the droplets/particles on the device, followed by partial least squares (PLS) calibration of the first derivative (1600 cm(-1) to 1550 cm(-1)) allowing successful measurement of monomer composition with a standard error of calibration (SEC) of +/-1.95% by volume. Following photopolymerization, the percentage of double bond conversion of the individual particles was calculated from the depletion of the normalized intensity of the C[double bond, length as m-dash]C stretching vibration at 1605 cm(-1). Raman data allowed accurate measurement of the decrease in double bond conversion as a function of increasing crosslinker concentration. The results from the research demonstrate that Raman spectroscopy is an effective, on-chip analytical tool for screening polymeric materials on the micrometre scale.     

Photoelectron imaging of I2- at 5.826 eV

We report the anion photoelectron spectrum of I2- taken at 5.826 eV detachment energy using velocity mapped imaging. The photoelectron spectrum exhibits bands resulting from transitions to the bound regions of the X 1Sigmag+(0g+), A' 3Piu(2u), A 3Piu(1u), and B 3Piu(0u+) electronic states as well as bands resulting from transitions to the repulsive regions of several I2 electronic states: the B' 3Piu(0u-), B" 1Piu(1u), 3Pig(2g), a 3Pig(1g), 3Pig(0g-), and C 3Sigmau+(1u) states. We simulate the photoelectron spectrum using literature parameters for the I2- and I2 ground and excited states. The photoelectron spectrum includes bands resulting from transitions to several high-lying excited states of I2 that have not been seen experimentally: 3Pig(0g-), 1Pig3(1g), 1 3Sigmag-3(0g+), and the 1Sigmag-3(0u-) states of I2. Finally, the photoelectron spectrum at 5.826 eV allows for the correction of a previous misassignment for the vertical detachment energy of the I2 B 3Piu(0u+) state.     

Efficient N-heterocyclic carbene-catalyzed O- to C-acyl transfer

[reaction: see text] An N-heterocyclic carbene promotes the rearrangement of alpha-amino acid derived O-acyl carbonates to their corresponding C-acylated isomers, generating a C-C bond and a quaternary stereocenter with high efficiency, under mild reaction conditions and with low catalyst loadings.     

PDMS bonding by means of a portable, low-cost corona system

A hand-held corona treater is presented as an effective, inexpensive, and portable alternative for irreversible bonding of polydimethylsiloxane (PDMS) to glass.     

Titanium biomaterials: titania needles in the test of the foraminiferan Bathysiphon argenteus

Scanning electron microscopy with energy dispersive microanalysis confirms the rare occurrence of a titanium mineral in the test of an organism.     

Synthesis of 17-alpha-substituted estradiol-pyridin-2-yl hydrazine conjugates as effective ligands for labeling with Alberto's complex fac-[Re(OH2)3(CO)3]+ in water

The development of (99m)Tc-estradiol radiopharmaceuticals would be advantageous for the detection of estrogen receptor-positive breast tumors. Estradiol derivatives conjugated to organometallic tricarbonyl-Tc(I) and related Re(I) complexes are capable of achieving high receptor binding affinity, but effective methods for synthesizing radiolabeled complexes in water are not available. Our interest in the synthesis of 2-hydrazinopyridines as ligands for Tc and Re led us to investigate Pd-catalyzed amination reactions of halo-pyridine substrates with di-tert-butyl hydrazodiformate. Both 2- and 4-substituted halo-pyridine substrates undergo C-N coupling with di-tert-butyl hydrazodiformate to produce Boc-protected pyridine hydrazine derivatives. Only highly electrophilic 3-pyridine halides were converted to the hydrazine. The Boc-protected 5-bromopyridin-2-yl hydrazine substrate 3 was prepared by regioselective substitution at the 2-position of 2,5-dibromopyridine. This bifunctional chelate was attached to ethynyl or vinyl groups at the 17alpha position of estradiol, using Sonogashira and Suzuki/Miyaura coupling reactions to synthesize 1 and 2 in high yields, respectively. Deprotection of 1 under acidic conditions provided the hydrazine hydrochloride salt 25. The 17alpha-estradiol-tricarbonylrhenium(I) complex 4 was synthesized by labeling 25 with fac-[Re(OH(2))(3)(CO)(3)](+) in aqueous ethanol. This complex exhibited excellent stability and high receptor binding affinity for the estrogen receptor, and it is a promising model for evaluation of the analogous Tc-99m complexes as diagnostic imaging agents for breast tumors.     

Synthesis and metal-binding properties of chelating fluorescein derivatives

[reaction: see text] Two routes to highly functionalized metal-chelating fluorescein derivatives have been pursued. Compound 3 is partially quenched by a variety of first-row transition metal ions in aqueous solution, with EC(50) values ranging from 0.4 to 60 microM. Compounds of this type may find application in biological sensing.     

Thermal decomposition of poly(α,α,α′,α′-tetrafluoro-p-xylylene) in nitrogen and oxygen

The thermal decomposition of poly(α,α,α′,α′-tetrafluoro-p-xylylene) (parylene AF-4) films with thicknesses of ca. 7.5 and 10 μm has been studied by both dynamic (10°C min^?1) and isothermal TG in either nitrogen or oxygen atmospheres. In dynamic studies with nitrogen, gross decomposition occurs between 546.7±1.4 and 589.0±2.6°C, with 26.8±4.4% of the initial mass remaining at 700°C. With oxygen as the purge gas, the onset of decomposition shifts slightly to 530.8±4.2°C. The end of the transition at 587.4±2.6°C is within experimental error of the nitrogen value, but no polymer remains above 600°C. Isothermal data were obtained at 10°C intervals from 420 to 490°C in nitrogen, and from 390 to 450°C in oxygen. Plots of log(Δ%wt/Δt)vs. T^?1 are linear throughout the specified range for oxygen and from 420 to 470°C for nitrogen. The calculated activation energies of (147±16) kJ mol^?1 and (150±12) kJ mol^?1 in N₂ and O₂, respectively, are equal within experimental error.