Optimisation and characterisation of biosensors based on polyaniline

With lower limits of detection and increased stability constantly being demanded of biosensor devices, characterisation of the constituent layers that make up the sensor has become unavoidable, since this is inextricably linked with its performance. This work describe the optimisation and characterisation of two aspects of sensor performance: a conductive polymer layer (polyaniline) and the immobilised protein layer. The influence of the thickness of polyaniline films deposited electrochemically onto screen-printed electrode surfaces is described in this work in terms of its influence on a variety of amperometric sensor performance characteristics: time to reach steady state, charging current, catalytic current, background current and signal/background ratios. The influence of polymer film thickness on the conductivity and morphology of finished films is also presented.

An electrostatic method of protein immobilisation is used in this work and scanning electron microscopy in conjunction with gold-labelled antibodies and back-scattered electron detection has enabled the direct visualisation of individual groups of proteins on the sensor surface. Such information can provide an insight into the performance of sensors under influence of increasing protein concentrations.     

Size-selective deposition and sorting of lyophilic colloidal particles on surfaces of patterned wettability

A highly parallelizable means of positioning or sorting particles in a size-selective manner into arrays is demonstrated based on the placement of particle suspensions on surfaces of patterned wettability and the subsequent evaporation of the suspending solvent. The method relies on creating lyophilic features of dimensions similar to or greater than those of the particles to be arrayed and smaller than those of the particles to be excluded. As the contact line recedes, it fills lyophilic features, creating discrete fluid elements that mimic the underlying lyophilic pattern. The fluid elements have aspect ratios dictated by the contact angle. By adjusting the size of the lyophilic features, the heights of the fluid elements can be adjusted to sequester or exclude particles based on their diameter. The principal interest of this work is its broad applicability. No prior understanding of the particle properties is needed except for the size of the particle and its ability to be suspended in a solvent.     

Novel fragmentation reaction of correolide

[reaction: see text] Pentacyclic triterpenoid natural product correolide (1) was converted to ketone 2 via ozonolysis. An unusual fragmentation reaction of ketone 2 with LiCl was discovered. This reaction is general among several similar substrates examined and appears to be specific for the correolide-type E-ring structure (ketone). A mechanism involving a retroaldol reaction, a nucleophilic opening of the epoxide, and a subsequent acetoxy elimination reaction was proposed.     

Quantitative Determination of Octamethylcyclotetrasiloxane (D4) in Extracts of Biological Matrices by Gas Chromatography-Mass Spectrometry

Abstract

A method was developed and validated to measure octamethylcyclotetrasiloxane (D₄)^? quantitatively by gas chromatography-mass spectrometry (GC-MS) at low level in extracts of several biological matrices that include plasma, liver, lung, feces and fat from rats. The key to the successful determination lay in the use of extracts dried with anhydrous magnesium sulfate. This was necessary in view of the propensity of the methyl siloxane based GC-stationary phase to generate D₄ by its reaction with water present in the extracts. To enable quantiiation of D₄ at parts per billion (μg/L) levels, the base ion m/z 281 resulting from the loss of a methyl group from the parent molecule was selected for monitoring by SIM mode in GC-MS. The recovery of D₄ from any of the biological matrices was determined to be greater than 90% in three extractions. The D₄ response for the standards in GC-MS was linear (R² > 0.9900) and reproducible at concentrations ranging from 1—16,000 ng D₄/g solvent. Precision was less than 5%.     

Buffers for the Physiological pH Range: Studies of 4-(N-Morpholino)butanesulfonic Acid (MOBS) from 5 to 55 °C

In this study, we report the pH values of two buffer solutions without chloride ion and eight buffer solutions with NaCl with an ionic strength I=0.16 mol?kg^?1. Electromotive force (emf) techniques have been used to get the cell potentials at 12 temperatures from 5 to 55?°C, including 37?°C. An extended form of the Bates-Guggenheim convention is used in the entire ionic strength range, 0.04 to 0.16?mol?kg^?1. The residual liquid junction potentials (??E _j ) of the buffer solutions of MOBS have been estimated from previous measurements with a flowing junction cell. These values of ??E _j have been used for correction in order to ascertain the operational pH values of four buffer solutions of MOBS at 25 and 37?°C. These solutions are recommended as pH standards for physiological application in the pH range 7.4 to 7.7.     

THE ROLE OF DNA DAMAGE IN PM2 VIRAL INACTIVATION BY METHYLENE BLUE PHOTOSENSITIZATION

Abstract— This study investigates the importance of DNA damage in viral inactivation by phenothiazines and light. Phenothiazines, including methylene blue (MB), toluidine blue and azure B are of particular interest because of their ability to bind to nucleic acids in vitro. Initial studies employing phages T7, MS2 and PM2 indicated that both DNA and RNA phages as well as enveloped and nonenveloped phages can be inactivated by phenothiazine photosensiti-zation. PM2, which contains a lipid-protein bilayer and supercoiled DNA, was used for the mechanistic studies to model blood-borne viruses. Viral DNA damage was assessed following treatment of phage to known levels of viral inactivation by extracting the DNA and analyzing for both direct and piperidine-catalyzed strand cleavage by gel electrophoresis. DNA strand cleavage was found to be both sensitizer concentration and light dose dependent. Both viral inactivation and DNA damage were found to be oxygen-dependent events. In parallel experiments, strand cleavage of isolated PM2 DNA treated with MB and light was also found to be oxygen dependent, in contrast to some previous reports. Transfection studies, which measure the infectivity of the extracted viral DNA, indicated that DNA from MB-treated phage was just as capable of generating progeny virus as the untreated controls. It was therefore concluded that the observed DNA damage is not correlated with loss of phage infectivity.     

REASSESSMENT OF THE DIFFERENTIAL EFFECTS OF ULTRAVIOLET AND IONIZING RADIATION ON HIV PROMOTER: THE USE OF CELL SURVIVAL AS THE BASIS FOR COMPARISONS

Abstract: Effects of different radiation treatments on the human immunodeficiency virus-1 (HIV) promoter were reassessed for exposures comparable to those encountered in clinical or cosmetic practice, using survival of the host cell as a basis for comparisons. The exposures were performed with two ultraviolet radiation sources commonly used as medical or cosmetic devices (UVASUN 2000 and FS20 lamps), a germicidal (G15T8) lamp and an X-ray machine. The UVC component of the FS20 lamp was filtered out. The emission spectra of the lamps were determined. The characteristics of these sources allowed us to discriminate among effects of UVA1 (340–400 nm), UVB + UVA2 (280–340 nm) and UVC (254 nm) radiations. Effects of irradiation were ascertained using cultures of HeLa cells stably transfected with the HIV promoter linked to a reporter—chloramphenicol acetyl transferase—gene. The exposures used caused at least two logs of cell killing. In this cytotoxicity range, UVA1 or X radiations had no effect on the HIV promoter, whereas UVB + UVA2 or UVC radiations activated the HIV promoter in a fluence-dependent manner. Survivals following exposure to UVB + UVA2 or UVC radiation were (1) at the lowest measurable HIV promoter activation, 30 and 20%, respectively, (2) at one-half maximal activation, 6 and 3%, respectively and (3) at the maximal activation, 0.5 and 0.2%, respectively. The results suggest that, among the radiations studied, UVB is the most important modality from the viewpoint of its potential effects on HIV-infected individuals, since (1) UVA1 or X radiations have no effects on the HIV promoter, (2) human exposure to UVC radiation is infrequent and (3) human UVB exposure is very common.     

NON-NUCLEAR DAMAGE AND CELL LYSIS ARE INDUCED BY UVA, BUT NOT UVB OR UVC, RADIATION IN THREE STRAINS OF L5178Y CELLS

The potential to induce non-nuclear changes in mammalian cells has been examined for (1) UVA1 radiation (340–400 nm, UVASUN 2000 lamp), (2) UVA + UVB (peak at 313 nm) radiation (FS20 lamp), and (3) UVC (254 nm) radiation (GI5T8 lamp). The effects of irradiation were monitored in vitro using three strains of L5178Y (LY) mouse lymphoma cells that markedly differ in sensitivity to UV radiation. Comparisons were made for the effects of approximately equitoxic fluences that reduced cell survival to 1–15%. Depending on the cell strain, the fluences ranged from 830 to 1600 kJ/m² for the UVASUN lamp, 75 to 390 J/m² for the FS20 lamp and 3.8 to 17.2 J/m² for the G15T8 lamp. At the exposure level used in this study, irradiation with the UVASUN, but not the FS20 or G15T8, lamp induced a variety of non-nuclear changes including damage to cytoplasmic organelles and increased plasma membrane permeability and cell lysis. Cell lysis and membrane permeabilization were induced by the UVA1 emission of the UVASUN lamp, but not by its visible + IR components (>400 nm). The results show that the plasma membrane and other organelles of LY cells are highly sensitive to UVA1 but not to UVB or UVC radiation. Also UVA1, but not UVB or UVC radiation, causes rapid and extensive lysis of LY cells. In conclusion, non-nuclear damage contributes substantially to UVA cytotoxicity in all three strains of LY cells.     

X-ray microfluorescence (μXRF) imaging of Aspergillus nidulans cell wall mutants reveals biochemical changes due to gene deletions

We used synchrotron X-ray fluorescence to create the first semiquantitative, submicron resolution, element distribution maps of P, S, K, and Ca, in situ, in fungal samples. Data collection was performed at the European Synchrotron Radiation Facility beam line ID21, Grenoble, France. We studied developing hyphae, septa, and conidiophores in Aspergillus nidulans, comparing wild type and two cell wall biosynthesis gene deletion strains. The latter encode sequential enzymes for biosynthesis of galactofuranose, a minor wall carbohydrate. Each gene deletion caused hyphal morphogenesis defects, and reduced both colony growth and sporulation 500-fold. Elemental imaging has helped elucidate biochemical changes in the phenotype induced by the gene deletions that were not apparent from morphological examination. Here, we examined S as a proxy for protein content, P for nucleic acid content, as well as Ca and K, which also have important metabolic roles. Element distributions in wild-type fungi reflect biological aspects already known or expected from other types of analysis; however, the application of X-ray fluorescence (XRF) imaging reveals aspects of gene deletion phenotypes that were not previously available. We have demonstrated that deleting a dispensable gene involved in galactose metabolism (ugeA) and one involved in biosynthesis of a minor cell wall component (ugmA) led to changes in hyphal elemental distribution that may have resulted from compromised wall composition.