N,N,N′,N′-Tetrabutyl-3,6-dioxaoctan-dithioamid,Ionophor mit Selektivität für Cd2+

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctane-dithioamide, an Ionophore with Selectivity for Cd²⁺ The dioxa-dithioamide 3 behaves as a highly selective ionophore for Cd²⁺ in solvent polymeric membranes. It induces cation-permselectivity in these membranes with a transference number of 1 for Cd(NO₃)₂- and of 2 for CdCl₂-solutions. In the presence of a proton carrier, 3 may be used to selectively pump Cd²⁺ through membranes by coupling with a pH gradient.     

Spatially resolved characterization of PEFCs using simultaneously neutron radiography and locally resolved impedance spectroscopy

A method for performing neutron radiography and locally resolved impedance spectroscopy simultaneously in situ in an operating polymer electrolyte fuel cell (PEFC) is presented. The new method provides concurrently spatially resolved information about the local cell performance, the locally limiting processes, and the liquid water distribution. Information about the impact of water on cell performance and limiting processes can be gained in situ on a local scale in an operating PEFC. The method was applied to a PEFC operated on pure H₂/O₂ in co-flow mode under low humidity operating conditions. The results show that in co-flow mode strong flooding and severe drying can occur at the very same time in different sections of a PEFC.     

1,3-Dipolare Addition von 2-Benzonitrilio-2-propanid an 7-Methylthieno[2,3-c]pyridin-1,1-dioxid und Folgereaktionen

1,3-Dipolar Addition of 2-Benzonitrilio-2-propanid to 7-Methylthieno[2,3-c]pyridine 1,1-Dioxide and Subsequent Reactions The addition of dipole 2 , generated photochemically from 2,2-dimethyl-3-phenyl-2H-azirine ( 1 ), to 7-methylthieno[2,3-c]pyridine 1,1-dioxide yields the pyrroline derivative 4 as a major product and regioisomer 5 in low yield. Compound 4 can be transformed into the pyrrolidine derivative 11 by ring opening, loss of SO₂ and hydrogenation. Bromopyrroline derivative 14 gives either by dehydrohalogenation compound 18 or, by substitution, nitrile 17 or ethoxy derivative 19 . Substitution of 14 and ring opening yields methoxypyrrole derivative 20 , which gives access to the unstable hydroxypyrrole and hydroxypyrrolidine derivative 28 resp. 30 . The vinylsulfone 18 is the starting material for addition-ring-cleavage reactions. Oxidation of pyrroline derivative 4 gives epoxy-substituted N-oxide 39 and di-N-oxide 40 ; and oxidative transformation of pyrrolidine derivative 11 yields the (hydroxymethyl)pyridylpyrrolidine derivative 45 .     

Computer simulations of enantioselective ester hydrolyses catalyzed by Pseudomonas cepacia lipase

On the basis of the X-ray crystal structure of the lipase from Pseudomonas cepacia (PcL)-an enzyme representative for a whole family of Pseudomonas lipases (lipase PS, SAM-2, AK 10, and others with a high degree of homology with PcL)-a computational study was performed to rationalize both the enantioselectivity and substrate specificity (tolerance) displayed by this lipase in the enantioselective hydrolysis of racemic esters 1a-12a from various secondary aromatic alcohols. The major goal of this project was the development of a binding model for PcL which is able to rationalize the experimental findings to predict "a priori the enantioselective behavior of PcL toward a wider range of substrates. A two-step modeling procedure, namely, docking experiments followed by construction of tetrahedral intermediates, was used for the simulation of the involved enzyme-substrate recognition/hydrolysis processes. The study of the recognition process (docking experiments) led to unambiguous identification of the binding geometry for the two enantiomeric series of substrates, but did not suggest a definitive interpretation of the behavior of PcL. Taking into consideration the stereoelectronic requirements of the enzymatic hydrolysis reaction, both the enantioselectivity and tolerance of the enzyme were then explained through the study of the tetrahedral intermediates, in turn constructed from the calculated docking geometries of 1a-12a.     

Über grünes Bis-(2-Iminoisopropyl-thiophenolato)-nickel(II) und weitere, ähnliche NiII-Komplexe

Green Bis-(2-iminoisopropyl-thiophenolato)nickel(II) and other Similar Ni^II Complexes The compounds [Ni^II(iitp)₂] 1 (iitp = 2-iminoisopropyl-thiophenolate), [Ni(imptp)₂] · 2 CH₃OH 2 , a dinuclear compound with an Ni? Ni distance of 276 pm, and [PPh₄] · [Ni^II(imptp)(SCN)] 3 (imptp = 2-(2-iminopentane-4-on)-thiophenolate) have been prepared by the reaction of nickel(II)-acetate-tetrahydrate with 2-iminoisopropyl-thiophenole and 2-(2-iminopentane-4-on)-thiophenole in methanol, respectively. They have been characterized by single-crystal X-ray structure analysis and other physical methods. The redox behaviour of 1–3 has been studied in detail (chemically as well as by cyclovoltammetry and ESR spectroscopy). Particularly interesting are the electronic properties of 1 and its reduction with NaBH₄ and the following reaction of the product with O₂. The complexes are model compounds for some Ni-containing enzymes. For details of the crystal structure determination see “Inhaltsübersicht”.     

A dual-column HPLC method for the simultaneous determination of DHPG (9-[(1,3-dihydroxy-2-propoxy)methyl]guanine) and its mono and diesters in biological samples

A convenient method for the simultaneous determination of various DHPG species present in biological samples is presented. This method utilizes a cation exchange column (25 cm X 4.6 mm i.d.) coupled in series to a short reversed-phase column (5 cm X 4.6 mm i.d.). The mobile phase consists of methanol:0.005M ammonium phosphate buffer, pH 2.5. There is a large polarity difference between DHPG and its esters due to the non-polar side chain of the ester moiety. The simultaneous determination of the diesters, monoesters, and DHPG in these samples using only the cation exchange or the reversed-phase column is not possible without time-consuming gradient elution. In the reversed-phase mode alone, the esters are highly retained relative to DHPG, whereas the esters are only slightly retained on a cation exchange column and are insensitive to changes in pH and ionic strength of the mobile phase. However, a combination of these two columns provides interesting selectivity for these compounds and offers a unique way of controlling the retention times of these species relative to each other. The retention time of esters can be selectively altered (with respect to DHPG) by changing the composition of methanol in the mobile phase. In contrast, the retention time of DHPG is controlled by changing the buffer strength and pH of the mobile phase.     

Extreme stability of an unsolvated alpha-helix

High-temperature ion mobility measurements have been performed for alpha-helical Ac-A15K+H+ and globular Ac-KA15+H+ peptides. The alpha-helical and globular conformations do not melt into random coils as the temperature is raised. Instead, both conformations survive to the point where the peptide signals vanishes due to fragmentation. This occurs at 600 K for the globular Ac-KA15+H+ peptide and at 725 K for the alpha-helical Ac-A15K+H+. For the helical Ac-A15K+H+ peptide it appears that fragmentation is triggered by disruption of the helical conformation.     

Zur Kenntnis des Natrium-tetrahydroxoaluminat-chlorids Na2[Al(OH)4]Cl

On the Sodium Tetrahydroxoaluminate Chloride Na₂[Al(OH)₄]Cl The hitherto unknown compound Na₂[Al(OH)₄]Cl was prepared by crystallisation from a NaCl containing sodium aluminate solution. According to the X-ray single crystal investigation (tetragonal, space group P4/nmm, a = 7.541 Å, c = 5.059 Å, Z = 2) the compound represents the first example of a crystalline hydroxoaluminate with monomeric [Al(OH)₄]^? anions. Cl^? shows a quadratic anti prismatic coordination to 4 Na⁺ and over hydrogen bonds to 4 O^2? while Na⁺ is octahedrally coordinated by 4 O^2? and 2 Cl^? (axial). The results of the crystal structure analysis are confirmed by ²⁷Al and ²³Na MAS NMR investigations. Na₂[Al(OH)₄]Cl decomposes at about 200°C without intermediates under formation of β-NaAlO₂ and NaCl.     

Effects of As(III) binding on alpha-helical structure

As(III) displays a wide range of effects in cellular chemistry. Surprisingly, the structural consequences of arsenic binding to peptides and proteins are poorly understood. This study utilizes model alpha-helical peptides containing two cysteine (Cys) residues in various sequential arrangements and spatial locations to study the structural effects of arsenic binding. With i, and i + 1, i + 2, or i + 3 arrangements, CD spectroscopy shows that As(III) coordination causes helical destabilization when Cys residues are located at central or C-terminal regions of the helix. Interestingly, arsenic binding to i, i + 3 positions results in the elimination of helical structure and the formation of a relatively stable alternate fold. In contrast, helical stabilization is observed for peptides containing i, i + 4 Cys residues, with corresponding pseudo pairwise interaction energies (Delta G(pw) degrees) of -1.0 and -0.7 kcal/mol for C-terminal and central placements, respectively. Binding affinities and association rate constants show that As(III) binding is comparatively insensitive to the location of the Cys residues within these moderately stable helices. These data demonstrate that As(III) binding can be a significant modulator of helical secondary structure.     

Kopsirachin,ein ungewöhnliches Alkaloid aus der Apocynaceae Kopsia dasyrachis Ridl. 189. Mitteilung über organische Naturstoffe

Kopsirachine, an Unusual Alkaloid from the Apocynaceae Kopsia dasyrachis Ridl. From the leaves of Kopsia dasyrachis Ridl. a new type of alkaloid, kopsirachine ( 1 ), built up from catechin ( 2 ) and skytanthine ( 3 ) has been isolated. The structure elucidationis based on spectral and chemical evidence. Oxidative cleavage of its derivative 4 with KMnO₄ afforded veratric acid wich was identified as its methylester by comparison with an authentic sample. Pyrolysis of 1 yielded δ-skytanthine ( 3 ). The stereochemistry of the skytanthine substituents in 1 could not yet be established.